Re: [RFC PATCH v1 1/4] Introducing qpw_lock() and per-cpu queue & flush work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 04, 2024 at 05:39:01PM -0400, Waiman Long wrote:
> On 6/21/24 23:58, Leonardo Bras wrote:
> > Some places in the kernel implement a parallel programming strategy
> > consisting on local_locks() for most of the work, and some rare remote
> > operations are scheduled on target cpu. This keeps cache bouncing low since
> > cacheline tends to be mostly local, and avoids the cost of locks in non-RT
> > kernels, even though the very few remote operations will be expensive due
> > to scheduling overhead.
> > 
> > On the other hand, for RT workloads this can represent a problem: getting
> > an important workload scheduled out to deal with some unrelated task is
> > sure to introduce unexpected deadline misses.
> > 
> > It's interesting, though, that local_lock()s in RT kernels become
> > spinlock(). We can make use of those to avoid scheduling work on a remote
> > cpu by directly updating another cpu's per_cpu structure, while holding
> > it's spinlock().
> > 
> > In order to do that, it's necessary to introduce a new set of functions to
> > make it possible to get another cpu's per-cpu "local" lock (qpw_{un,}lock*)
> > and also the corresponding queue_percpu_work_on() and flush_percpu_work()
> > helpers to run the remote work.
> > 
> > On non-RT kernels, no changes are expected, as every one of the introduced
> > helpers work the exactly same as the current implementation:
> > qpw_{un,}lock*()        ->  local_{un,}lock*() (ignores cpu parameter)
> > queue_percpu_work_on()  ->  queue_work_on()
> > flush_percpu_work()     ->  flush_work()
> > 
> > For RT kernels, though, qpw_{un,}lock*() will use the extra cpu parameter
> > to select the correct per-cpu structure to work on, and acquire the
> > spinlock for that cpu.
> > 
> > queue_percpu_work_on() will just call the requested function in the current
> > cpu, which will operate in another cpu's per-cpu object. Since the
> > local_locks() become spinlock()s in PREEMPT_RT, we are safe doing that.
> > 
> > flush_percpu_work() then becomes a no-op since no work is actually
> > scheduled on a remote cpu.
> > 
> > Some minimal code rework is needed in order to make this mechanism work:
> > The calls for local_{un,}lock*() on the functions that are currently
> > scheduled on remote cpus need to be replaced by qpw_{un,}lock_n*(), so in
> > RT kernels they can reference a different cpu. It's also necessary to use a
> > qpw_struct instead of a work_struct, but it just contains a work struct
> > and, in PREEMPT_RT, the target cpu.
> > 
> > This should have almost no impact on non-RT kernels: few this_cpu_ptr()
> > will become per_cpu_ptr(,smp_processor_id()).
> > 
> > On RT kernels, this should improve performance and reduce latency by
> > removing scheduling noise.
> > 
> > Signed-off-by: Leonardo Bras <leobras@xxxxxxxxxx>
> > ---
> >   include/linux/qpw.h | 88 +++++++++++++++++++++++++++++++++++++++++++++
> >   1 file changed, 88 insertions(+)
> >   create mode 100644 include/linux/qpw.h
> > 
> > diff --git a/include/linux/qpw.h b/include/linux/qpw.h
> > new file mode 100644
> > index 000000000000..ea2686a01e5e
> > --- /dev/null
> > +++ b/include/linux/qpw.h
> > @@ -0,0 +1,88 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +#ifndef _LINUX_QPW_H
> > +#define _LINUX_QPW_H
> > +
> > +#include "linux/local_lock.h"
> > +#include "linux/workqueue.h"
> > +
> > +#ifndef CONFIG_PREEMPT_RT
> > +
> > +struct qpw_struct {
> > +	struct work_struct work;
> > +};
> > +
> > +#define qpw_lock(lock, cpu)					\
> > +	local_lock(lock)
> > +
> > +#define qpw_unlock(lock, cpu)					\
> > +	local_unlock(lock)
> > +
> > +#define qpw_lock_irqsave(lock, flags, cpu)			\
> > +	local_lock_irqsave(lock, flags)
> > +
> > +#define qpw_unlock_irqrestore(lock, flags, cpu)			\
> > +	local_unlock_irqrestore(lock, flags)
> > +
> > +#define queue_percpu_work_on(c, wq, qpw)			\
> > +	queue_work_on(c, wq, &(qpw)->work)
> > +
> > +#define flush_percpu_work(qpw)					\
> > +	flush_work(&(qpw)->work)
> > +
> > +#define qpw_get_cpu(qpw)					\
> > +	smp_processor_id()
> > +
> > +#define INIT_QPW(qpw, func, c)					\
> > +	INIT_WORK(&(qpw)->work, (func))
> > +
> > +#else /* !CONFIG_PREEMPT_RT */
> > +
> > +struct qpw_struct {
> > +	struct work_struct work;
> > +	int cpu;
> > +};
> > +
> > +#define qpw_lock(__lock, cpu)					\
> > +	do {							\
> > +		migrate_disable();				\
> > +		spin_lock(per_cpu_ptr((__lock), cpu));		\
> > +	} while (0)
> > +
> > +#define qpw_unlock(__lock, cpu)					\
> > +	do {							\
> > +		spin_unlock(per_cpu_ptr((__lock), cpu));	\
> > +		migrate_enable();				\
> > +	} while (0)
> 
> Why there is a migrate_disable/enable() call in qpw_lock/unlock()? The
> rt_spin_lock/unlock() calls have already include a migrate_disable/enable()
> pair.

This was copied from PREEMPT_RT=y local_locks.

In my tree, I see:

#define __local_unlock(__lock)					\
	do {							\
		spin_unlock(this_cpu_ptr((__lock)));		\
		migrate_enable();				\
	} while (0)

But you are right:
For PREEMPT_RT=y, spin_{un,}lock() will be defined in spinlock_rt.h
as rt_spin{un,}lock(), which already runs migrate_{en,dis}able().

On the other hand, for spin_lock() will run migrate_disable() just before 
finishing the function, and local_lock() will run it before calling 
spin_lock() and thus, before spin_acquire().

(local_unlock looks like to have an unnecessary extra migrate_enable(), 
though).

I am not sure if it's actually necessary to run this extra 
migrate_disable() in local_lock() case, maybe Thomas could help us 
understand this.

But sure, if we can remove this from local_{un,}lock(), I am sure we can 
also remove this from qpw.


> 
> > +
> > +#define qpw_lock_irqsave(lock, flags, cpu)			\
> > +	do {							\
> > +		typecheck(unsigned long, flags);		\
> > +		flags = 0;					\
> > +		qpw_lock(lock, cpu);				\
> > +	} while (0)
> > +
> > +#define qpw_unlock_irqrestore(lock, flags, cpu)			\
> > +	qpw_unlock(lock, cpu)
> > +
> > +#define queue_percpu_work_on(c, wq, qpw)			\
> > +	do {							\
> > +		struct qpw_struct *__qpw = (qpw);		\
> > +		WARN_ON((c) != __qpw->cpu);			\
> > +		__qpw->work.func(&__qpw->work);			\
> > +	} while (0)
> > +
> > +#define flush_percpu_work(qpw)					\
> > +	do {} while (0)
> > +
> > +#define qpw_get_cpu(w)						\
> > +	container_of((w), struct qpw_struct, work)->cpu
> > +
> > +#define INIT_QPW(qpw, func, c)					\
> > +	do {							\
> > +		struct qpw_struct *__qpw = (qpw);		\
> > +		INIT_WORK(&__qpw->work, (func));		\
> > +		__qpw->cpu = (c);				\
> > +	} while (0)
> > +
> > +#endif /* CONFIG_PREEMPT_RT */
> > +#endif /* LINUX_QPW_H */
> 
> You may also consider adding a documentation file about the
> qpw_lock/unlock() calls.

Sure, will do when I send the non-RFC version. Thanks for pointing that 
out!

> 
> Cheers,
> Longman
> 

Thanks!
Leo





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [Monitors]

  Powered by Linux