Collection of memory_pressure can be enabled by writing 1 to the cpuset
file 'memory_pressure_enabled', which is only for cpuset-v1. Therefore,
move the corresponding code to cpuset-v1.c.
Currently, the 'fmeter_init' and 'fmeter_getrate' functions are called
at cpuset.c, so expose them to cpuset.c.
Signed-off-by: Chen Ridong <chenridong@xxxxxxxxxx>
---
kernel/cgroup/cpuset-internal.h | 7 ++
kernel/cgroup/cpuset-v1.c | 134 ++++++++++++++++++++++++++++++++
kernel/cgroup/cpuset.c | 134 --------------------------------
3 files changed, 141 insertions(+), 134 deletions(-)
diff --git a/kernel/cgroup/cpuset-internal.h b/kernel/cgroup/cpuset-internal.h
index ffea3eefebdf..7911c86bf012 100644
--- a/kernel/cgroup/cpuset-internal.h
+++ b/kernel/cgroup/cpuset-internal.h
@@ -238,4 +238,11 @@ static inline int is_spread_slab(const struct cpuset *cs)
return test_bit(CS_SPREAD_SLAB, &cs->flags);
}
+/*
+ * cpuset-v1.c
+ */
+
+void fmeter_init(struct fmeter *fmp);
+int fmeter_getrate(struct fmeter *fmp);
+
#endif /* __CPUSET_INTERNAL_H */
diff --git a/kernel/cgroup/cpuset-v1.c b/kernel/cgroup/cpuset-v1.c
index bdec4b196986..e7d137ff57cf 100644
--- a/kernel/cgroup/cpuset-v1.c
+++ b/kernel/cgroup/cpuset-v1.c
@@ -1,3 +1,137 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#include "cpuset-internal.h"
+
+/*
+ * Frequency meter - How fast is some event occurring?
+ *
+ * These routines manage a digitally filtered, constant time based,
+ * event frequency meter. There are four routines:
+ * fmeter_init() - initialize a frequency meter.
+ * fmeter_markevent() - called each time the event happens.
+ * fmeter_getrate() - returns the recent rate of such events.
+ * fmeter_update() - internal routine used to update fmeter.
+ *
+ * A common data structure is passed to each of these routines,
+ * which is used to keep track of the state required to manage the
+ * frequency meter and its digital filter.
+ *
+ * The filter works on the number of events marked per unit time.
+ * The filter is single-pole low-pass recursive (IIR). The time unit
+ * is 1 second. Arithmetic is done using 32-bit integers scaled to
+ * simulate 3 decimal digits of precision (multiplied by 1000).
+ *
+ * With an FM_COEF of 933, and a time base of 1 second, the filter
+ * has a half-life of 10 seconds, meaning that if the events quit
+ * happening, then the rate returned from the fmeter_getrate()
+ * will be cut in half each 10 seconds, until it converges to zero.
+ *
+ * It is not worth doing a real infinitely recursive filter. If more
+ * than FM_MAXTICKS ticks have elapsed since the last filter event,
+ * just compute FM_MAXTICKS ticks worth, by which point the level
+ * will be stable.
+ *
+ * Limit the count of unprocessed events to FM_MAXCNT, so as to avoid
+ * arithmetic overflow in the fmeter_update() routine.
+ *
+ * Given the simple 32 bit integer arithmetic used, this meter works
+ * best for reporting rates between one per millisecond (msec) and
+ * one per 32 (approx) seconds. At constant rates faster than one
+ * per msec it maxes out at values just under 1,000,000. At constant
+ * rates between one per msec, and one per second it will stabilize
+ * to a value N*1000, where N is the rate of events per second.
+ * At constant rates between one per second and one per 32 seconds,
+ * it will be choppy, moving up on the seconds that have an event,
+ * and then decaying until the next event. At rates slower than
+ * about one in 32 seconds, it decays all the way back to zero between
+ * each event.
+ */
+
+#define FM_COEF 933 /* coefficient for half-life of 10 secs */
+#define FM_MAXTICKS ((u32)99) /* useless computing more ticks than this */
+#define FM_MAXCNT 1000000 /* limit cnt to avoid overflow */
+#define FM_SCALE 1000 /* faux fixed point scale */
+
+/* Initialize a frequency meter */
+void fmeter_init(struct fmeter *fmp)
+{
+ fmp->cnt = 0;
+ fmp->val = 0;
+ fmp->time = 0;
+ spin_lock_init(&fmp->lock);
+}
+
+/* Internal meter update - process cnt events and update value */
+static void fmeter_update(struct fmeter *fmp)
+{
+ time64_t now;
+ u32 ticks;
+
+ now = ktime_get_seconds();
+ ticks = now - fmp->time;
+
+ if (ticks == 0)
+ return;
+
+ ticks = min(FM_MAXTICKS, ticks);
+ while (ticks-- > 0)
+ fmp->val = (FM_COEF * fmp->val) / FM_SCALE;
+ fmp->time = now;
+
+ fmp->val += ((FM_SCALE - FM_COEF) * fmp->cnt) / FM_SCALE;
+ fmp->cnt = 0;
+}
+
+/* Process any previous ticks, then bump cnt by one (times scale). */
+static void fmeter_markevent(struct fmeter *fmp)
+{
+ spin_lock(&fmp->lock);
+ fmeter_update(fmp);
+ fmp->cnt = min(FM_MAXCNT, fmp->cnt + FM_SCALE);
+ spin_unlock(&fmp->lock);
+}
+
+/* Process any previous ticks, then return current value. */
+int fmeter_getrate(struct fmeter *fmp)
+{
+ int val;
+
+ spin_lock(&fmp->lock);
+ fmeter_update(fmp);
+ val = fmp->val;
+ spin_unlock(&fmp->lock);
+ return val;
+}
+
+/*
+ * Collection of memory_pressure is suppressed unless
+ * this flag is enabled by writing "1" to the special
+ * cpuset file 'memory_pressure_enabled' in the root cpuset.
+ */
+
+int cpuset_memory_pressure_enabled __read_mostly;
+
+/*
+ * __cpuset_memory_pressure_bump - keep stats of per-cpuset reclaims.
+ *
+ * Keep a running average of the rate of synchronous (direct)
+ * page reclaim efforts initiated by tasks in each cpuset.
+ *
+ * This represents the rate at which some task in the cpuset
+ * ran low on memory on all nodes it was allowed to use, and
+ * had to enter the kernels page reclaim code in an effort to
+ * create more free memory by tossing clean pages or swapping
+ * or writing dirty pages.
+ *
+ * Display to user space in the per-cpuset read-only file
+ * "memory_pressure". Value displayed is an integer
+ * representing the recent rate of entry into the synchronous
+ * (direct) page reclaim by any task attached to the cpuset.
+ */
+
+void __cpuset_memory_pressure_bump(void)
+{
+ rcu_read_lock();
+ fmeter_markevent(&task_cs(current)->fmeter);
+ rcu_read_unlock();
+}
diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index 61763dd70de5..17f7984a41f5 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -2990,107 +2990,6 @@ static int update_prstate(struct cpuset *cs, int new_prs)
return 0;
}
-/*
- * Frequency meter - How fast is some event occurring?
- *
- * These routines manage a digitally filtered, constant time based,
- * event frequency meter. There are four routines:
- * fmeter_init() - initialize a frequency meter.
- * fmeter_markevent() - called each time the event happens.
- * fmeter_getrate() - returns the recent rate of such events.
- * fmeter_update() - internal routine used to update fmeter.
- *
- * A common data structure is passed to each of these routines,
- * which is used to keep track of the state required to manage the
- * frequency meter and its digital filter.
- *
- * The filter works on the number of events marked per unit time.
- * The filter is single-pole low-pass recursive (IIR). The time unit
- * is 1 second. Arithmetic is done using 32-bit integers scaled to
- * simulate 3 decimal digits of precision (multiplied by 1000).
- *
- * With an FM_COEF of 933, and a time base of 1 second, the filter
- * has a half-life of 10 seconds, meaning that if the events quit
- * happening, then the rate returned from the fmeter_getrate()
- * will be cut in half each 10 seconds, until it converges to zero.
- *
- * It is not worth doing a real infinitely recursive filter. If more
- * than FM_MAXTICKS ticks have elapsed since the last filter event,
- * just compute FM_MAXTICKS ticks worth, by which point the level
- * will be stable.
- *
- * Limit the count of unprocessed events to FM_MAXCNT, so as to avoid
- * arithmetic overflow in the fmeter_update() routine.
- *
- * Given the simple 32 bit integer arithmetic used, this meter works
- * best for reporting rates between one per millisecond (msec) and
- * one per 32 (approx) seconds. At constant rates faster than one
- * per msec it maxes out at values just under 1,000,000. At constant
- * rates between one per msec, and one per second it will stabilize
- * to a value N*1000, where N is the rate of events per second.
- * At constant rates between one per second and one per 32 seconds,
- * it will be choppy, moving up on the seconds that have an event,
- * and then decaying until the next event. At rates slower than
- * about one in 32 seconds, it decays all the way back to zero between
- * each event.
- */
-
-#define FM_COEF 933 /* coefficient for half-life of 10 secs */
-#define FM_MAXTICKS ((u32)99) /* useless computing more ticks than this */
-#define FM_MAXCNT 1000000 /* limit cnt to avoid overflow */
-#define FM_SCALE 1000 /* faux fixed point scale */
-
-/* Initialize a frequency meter */
-static void fmeter_init(struct fmeter *fmp)
-{
- fmp->cnt = 0;
- fmp->val = 0;
- fmp->time = 0;
- spin_lock_init(&fmp->lock);
-}
-
-/* Internal meter update - process cnt events and update value */
-static void fmeter_update(struct fmeter *fmp)
-{
- time64_t now;
- u32 ticks;
-
- now = ktime_get_seconds();
- ticks = now - fmp->time;
-
- if (ticks == 0)
- return;
-
- ticks = min(FM_MAXTICKS, ticks);
- while (ticks-- > 0)
- fmp->val = (FM_COEF * fmp->val) / FM_SCALE;
- fmp->time = now;
-
- fmp->val += ((FM_SCALE - FM_COEF) * fmp->cnt) / FM_SCALE;
- fmp->cnt = 0;
-}
-
-/* Process any previous ticks, then bump cnt by one (times scale). */
-static void fmeter_markevent(struct fmeter *fmp)
-{
- spin_lock(&fmp->lock);
- fmeter_update(fmp);
- fmp->cnt = min(FM_MAXCNT, fmp->cnt + FM_SCALE);
- spin_unlock(&fmp->lock);
-}
-
-/* Process any previous ticks, then return current value. */
-static int fmeter_getrate(struct fmeter *fmp)
-{
- int val;
-
- spin_lock(&fmp->lock);
- fmeter_update(fmp);
- val = fmp->val;
- spin_unlock(&fmp->lock);
- return val;
-}
-
static struct cpuset *cpuset_attach_old_cs;
/*
@@ -4780,39 +4679,6 @@ void cpuset_print_current_mems_allowed(void)
rcu_read_unlock();
}
-/*
- * Collection of memory_pressure is suppressed unless
- * this flag is enabled by writing "1" to the special
- * cpuset file 'memory_pressure_enabled' in the root cpuset.
- */
-
-int cpuset_memory_pressure_enabled __read_mostly;
-
-/*
- * __cpuset_memory_pressure_bump - keep stats of per-cpuset reclaims.
- *
- * Keep a running average of the rate of synchronous (direct)
- * page reclaim efforts initiated by tasks in each cpuset.
- *
- * This represents the rate at which some task in the cpuset
- * ran low on memory on all nodes it was allowed to use, and
- * had to enter the kernels page reclaim code in an effort to
- * create more free memory by tossing clean pages or swapping
- * or writing dirty pages.
- *
- * Display to user space in the per-cpuset read-only file
- * "memory_pressure". Value displayed is an integer
- * representing the recent rate of entry into the synchronous
- * (direct) page reclaim by any task attached to the cpuset.
- */
-
-void __cpuset_memory_pressure_bump(void)
-{
- rcu_read_lock();
- fmeter_markevent(&task_cs(current)->fmeter);
- rcu_read_unlock();
-}
-
#ifdef CONFIG_PROC_PID_CPUSET
/*
* proc_cpuset_show()
--
2.34.1
