The current design of cgroup_rstat_cpu_pop_updated() is to traverse
the updated tree in a way to pop out the leaf nodes first before
their parents. This can cause traversal of multiple nodes before a
leaf node can be found and popped out. IOW, a given node in the tree
can be visited multiple times before the whole operation is done. So
it is not very efficient and the code can be hard to read.
With the introduction of cgroup_rstat_updated_list() to build a list
of cgroups to be flushed first before any flushing operation is being
done, we can optimize the way the updated tree nodes are being popped
by pushing the parents first to the tail end of the list before their
children. In this way, most updated tree nodes will be visited only
once with the exception of the subtree root as we still need to go
back to its parent and popped it out of its updated_children list.
This also makes the code easier to read.
A parallel kernel build on a 2-socket x86-64 server is used as the
benchmarking tool for measuring the lock hold time. Below were the lock
hold time frequency distribution before and after the patch:
Hold time Before patch After patch
--------- ------------ -----------
0-01 us 13,738,708 14,594,545
01-05 us 1,177,194 439,926
05-10 us 4,984 5,960
10-15 us 3,562 3,543
15-20 us 1,314 1,397
20-25 us 18 25
25-30 us 12 12
It can be seen that the patch pushes the lock hold time towards the
lower end.
Signed-off-by: Waiman Long <longman@xxxxxxxxxx>
---
kernel/cgroup/rstat.c | 134 +++++++++++++++++++++++-------------------
1 file changed, 72 insertions(+), 62 deletions(-)
diff --git a/kernel/cgroup/rstat.c b/kernel/cgroup/rstat.c
index 1f300bf4dc40..701388fa215f 100644
--- a/kernel/cgroup/rstat.c
+++ b/kernel/cgroup/rstat.c
@@ -74,64 +74,92 @@ __bpf_kfunc void cgroup_rstat_updated(struct cgroup *cgrp, int cpu)
}
/**
- * cgroup_rstat_cpu_pop_updated - iterate and dismantle rstat_cpu updated tree
- * @pos: current position
- * @root: root of the tree to traversal
+ * cgroup_rstat_push_children - push children cgroups into the given list
+ * @head: current head of the list (= parent cgroup)
+ * @prstatc: cgroup_rstat_cpu of the parent cgroup
* @cpu: target cpu
+ * Return: A new singly linked list of cgroups to be flush
*
- * Walks the updated rstat_cpu tree on @cpu from @root. %NULL @pos starts
- * the traversal and %NULL return indicates the end. During traversal,
- * each returned cgroup is unlinked from the tree. Must be called with the
- * matching cgroup_rstat_cpu_lock held.
+ * Recursively traverse down the cgroup_rstat_cpu updated tree and push
+ * parent first before its children into a singly linked list built from
+ * the tail backward like "pushing" cgroups into a stack. The parent is
+ * pushed by the caller. The recursion depth is the depth of the current
+ * updated subtree.
+ */
+static struct cgroup *cgroup_rstat_push_children(struct cgroup *head,
+ struct cgroup_rstat_cpu *prstatc, int cpu)
+{
+ struct cgroup *child, *parent;
+ struct cgroup_rstat_cpu *crstatc;
+
+ parent = head;
+ child = prstatc->updated_children;
+ prstatc->updated_children = parent;
+
+ /* updated_next is parent cgroup terminated */
+ while (child != parent) {
+ child->rstat_flush_next = head;
+ head = child;
+ crstatc = cgroup_rstat_cpu(child, cpu);
+ if (crstatc->updated_children != child)
+ head = cgroup_rstat_push_children(head, crstatc, cpu);
+ child = crstatc->updated_next;
+ crstatc->updated_next = NULL;
+ }
+ return head;
+}
+
+/**
+ * cgroup_rstat_updated_list - return a list of updated cgroups to be flushed
+ * @root: root of the cgroup subtree to traverse
+ * @cpu: target cpu
+ * Return: A singly linked list of cgroups to be flushed
+ *
+ * Walks the updated rstat_cpu tree on @cpu from @root. During traversal,
+ * each returned cgroup is unlinked from the updated tree.
*
* The only ordering guarantee is that, for a parent and a child pair
- * covered by a given traversal, if a child is visited, its parent is
- * guaranteed to be visited afterwards.
+ * covered by a given traversal, the child is before its parent in
+ * the list.
+ *
+ * Note that updated_children is self terminated and points to a list of
+ * child cgroups if not empty. Whereas updated_next is like a sibling link
+ * within the children list and terminated by the parent cgroup. An exception
+ * here is the cgroup root whose updated_next can be self terminated.
*/
-static struct cgroup *cgroup_rstat_cpu_pop_updated(struct cgroup *pos,
- struct cgroup *root, int cpu)
+static struct cgroup *cgroup_rstat_updated_list(struct cgroup *root, int cpu)
{
- struct cgroup_rstat_cpu *rstatc;
- struct cgroup *parent;
-
- if (pos == root)
- return NULL;
+ raw_spinlock_t *cpu_lock = per_cpu_ptr(&cgroup_rstat_cpu_lock, cpu);
+ struct cgroup_rstat_cpu *rstatc = cgroup_rstat_cpu(root, cpu);
+ struct cgroup *head = NULL, *parent;
+ unsigned long flags;
/*
- * We're gonna walk down to the first leaf and visit/remove it. We
- * can pick whatever unvisited node as the starting point.
+ * The _irqsave() is needed because cgroup_rstat_lock is
+ * spinlock_t which is a sleeping lock on PREEMPT_RT. Acquiring
+ * this lock with the _irq() suffix only disables interrupts on
+ * a non-PREEMPT_RT kernel. The raw_spinlock_t below disables
+ * interrupts on both configurations. The _irqsave() ensures
+ * that interrupts are always disabled and later restored.
*/
- if (!pos) {
- pos = root;
- /* return NULL if this subtree is not on-list */
- if (!cgroup_rstat_cpu(pos, cpu)->updated_next)
- return NULL;
- } else {
- pos = cgroup_parent(pos);
- }
+ raw_spin_lock_irqsave(cpu_lock, flags);
- /* walk down to the first leaf */
- while (true) {
- rstatc = cgroup_rstat_cpu(pos, cpu);
- if (rstatc->updated_children == pos)
- break;
- pos = rstatc->updated_children;
- }
+ /* Return NULL if this subtree is not on-list */
+ if (!rstatc->updated_next)
+ goto unlock_ret;
/*
- * Unlink @pos from the tree. As the updated_children list is
+ * Unlink @root from its parent. As the updated_children list is
* singly linked, we have to walk it to find the removal point.
- * However, due to the way we traverse, @pos will be the first
- * child in most cases. The only exception is @root.
*/
- parent = cgroup_parent(pos);
+ parent = cgroup_parent(root);
if (parent) {
struct cgroup_rstat_cpu *prstatc;
struct cgroup **nextp;
prstatc = cgroup_rstat_cpu(parent, cpu);
nextp = &prstatc->updated_children;
- while (*nextp != pos) {
+ while (*nextp != root) {
struct cgroup_rstat_cpu *nrstatc;
nrstatc = cgroup_rstat_cpu(*nextp, cpu);
@@ -142,31 +170,13 @@ static struct cgroup *cgroup_rstat_cpu_pop_updated(struct cgroup *pos,
}
rstatc->updated_next = NULL;
- return pos;
-}
-
-/* Return a list of updated cgroups to be flushed */
-static struct cgroup *cgroup_rstat_updated_list(struct cgroup *root, int cpu)
-{
- raw_spinlock_t *cpu_lock = per_cpu_ptr(&cgroup_rstat_cpu_lock, cpu);
- struct cgroup *head, *tail, *next;
- unsigned long flags;
- /*
- * The _irqsave() is needed because cgroup_rstat_lock is
- * spinlock_t which is a sleeping lock on PREEMPT_RT. Acquiring
- * this lock with the _irq() suffix only disables interrupts on
- * a non-PREEMPT_RT kernel. The raw_spinlock_t below disables
- * interrupts on both configurations. The _irqsave() ensures
- * that interrupts are always disabled and later restored.
- */
- raw_spin_lock_irqsave(cpu_lock, flags);
- head = tail = cgroup_rstat_cpu_pop_updated(NULL, root, cpu);
- while (tail) {
- next = cgroup_rstat_cpu_pop_updated(tail, root, cpu);
- tail->rstat_flush_next = next;
- tail = next;
- }
+ /* Push @root to the list first before pushing the children */
+ head = root;
+ root->rstat_flush_next = NULL;
+ if (rstatc->updated_children != root)
+ head = cgroup_rstat_push_children(head, rstatc, cpu);
+unlock_ret:
raw_spin_unlock_irqrestore(cpu_lock, flags);
return head;
}
