Re: [PATCH v3 2/2] mm: memcg: introduce new event to trace shrink_memcg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Nov 25, 2023 at 06:36:16AM +0000, Shakeel Butt wrote:
> On Thu, Nov 23, 2023 at 10:39:37PM +0300, Dmitry Rokosov wrote:
> > The shrink_memcg flow plays a crucial role in memcg reclamation.
> > Currently, it is not possible to trace this point from non-direct
> > reclaim paths. However, direct reclaim has its own tracepoint, so there
> > is no issue there. In certain cases, when debugging memcg pressure,
> > developers may need to identify all potential requests for memcg
> > reclamation including kswapd(). The patchset introduces the tracepoints
> > mm_vmscan_memcg_shrink_{begin|end}() to address this problem.
> > 
> > Example of output in the kswapd context (non-direct reclaim):
> >     kswapd0-39      [001] .....   240.356378: mm_vmscan_memcg_shrink_begin: order=0 gfp_flags=GFP_KERNEL memcg=16
> >     kswapd0-39      [001] .....   240.356396: mm_vmscan_memcg_shrink_end: nr_reclaimed=0 memcg=16
> >     kswapd0-39      [001] .....   240.356420: mm_vmscan_memcg_shrink_begin: order=0 gfp_flags=GFP_KERNEL memcg=16
> >     kswapd0-39      [001] .....   240.356454: mm_vmscan_memcg_shrink_end: nr_reclaimed=1 memcg=16
> >     kswapd0-39      [001] .....   240.356479: mm_vmscan_memcg_shrink_begin: order=0 gfp_flags=GFP_KERNEL memcg=16
> >     kswapd0-39      [001] .....   240.356506: mm_vmscan_memcg_shrink_end: nr_reclaimed=4 memcg=16
> >     kswapd0-39      [001] .....   240.356525: mm_vmscan_memcg_shrink_begin: order=0 gfp_flags=GFP_KERNEL memcg=16
> >     kswapd0-39      [001] .....   240.356593: mm_vmscan_memcg_shrink_end: nr_reclaimed=11 memcg=16
> >     kswapd0-39      [001] .....   240.356614: mm_vmscan_memcg_shrink_begin: order=0 gfp_flags=GFP_KERNEL memcg=16
> >     kswapd0-39      [001] .....   240.356738: mm_vmscan_memcg_shrink_end: nr_reclaimed=25 memcg=16
> >     kswapd0-39      [001] .....   240.356790: mm_vmscan_memcg_shrink_begin: order=0 gfp_flags=GFP_KERNEL memcg=16
> >     kswapd0-39      [001] .....   240.357125: mm_vmscan_memcg_shrink_end: nr_reclaimed=53 memcg=16
> > 
> > Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
> > ---
> >  include/trace/events/vmscan.h | 22 ++++++++++++++++++++++
> >  mm/vmscan.c                   |  7 +++++++
> >  2 files changed, 29 insertions(+)
> > 
> > diff --git a/include/trace/events/vmscan.h b/include/trace/events/vmscan.h
> > index e9093fa1c924..a4686afe571d 100644
> > --- a/include/trace/events/vmscan.h
> > +++ b/include/trace/events/vmscan.h
> > @@ -180,6 +180,17 @@ DEFINE_EVENT(mm_vmscan_memcg_reclaim_begin_template, mm_vmscan_memcg_softlimit_r
> >  	TP_ARGS(order, gfp_flags, memcg)
> >  );
> >  
> > +DEFINE_EVENT(mm_vmscan_memcg_reclaim_begin_template, mm_vmscan_memcg_shrink_begin,
> > +
> > +	TP_PROTO(int order, gfp_t gfp_flags, const struct mem_cgroup *memcg),
> > +
> > +	TP_ARGS(order, gfp_flags, memcg)
> > +);
> > +
> > +#else
> > +
> > +#define trace_mm_vmscan_memcg_shrink_begin(...)
> > +
> >  #endif /* CONFIG_MEMCG */
> >  
> >  DECLARE_EVENT_CLASS(mm_vmscan_direct_reclaim_end_template,
> > @@ -243,6 +254,17 @@ DEFINE_EVENT(mm_vmscan_memcg_reclaim_end_template, mm_vmscan_memcg_softlimit_rec
> >  	TP_ARGS(nr_reclaimed, memcg)
> >  );
> >  
> > +DEFINE_EVENT(mm_vmscan_memcg_reclaim_end_template, mm_vmscan_memcg_shrink_end,
> > +
> > +	TP_PROTO(unsigned long nr_reclaimed, const struct mem_cgroup *memcg),
> > +
> > +	TP_ARGS(nr_reclaimed, memcg)
> > +);
> > +
> > +#else
> > +
> > +#define trace_mm_vmscan_memcg_shrink_end(...)
> > +
> >  #endif /* CONFIG_MEMCG */
> >  
> >  TRACE_EVENT(mm_shrink_slab_start,
> > diff --git a/mm/vmscan.c b/mm/vmscan.c
> > index 45780952f4b5..f7e3ddc5a7ad 100644
> > --- a/mm/vmscan.c
> > +++ b/mm/vmscan.c
> > @@ -6461,6 +6461,10 @@ static void shrink_node_memcgs(pg_data_t *pgdat, struct scan_control *sc)
> >  		 */
> >  		cond_resched();
> >  
> > +		trace_mm_vmscan_memcg_shrink_begin(sc->order,
> > +						   sc->gfp_mask,
> > +						   memcg);
> > +
> 
> If you place the start of the trace here, you may have only the begin
> trace for memcgs whose usage are below their min or low limits. Is that
> fine? Otherwise you can put it just before shrink_lruvec() call.
> 

>From my point of view, it's fine. For situations like the one you
described, when we only see the begin() tracepoint raised without the
end(), we understand that reclaim requests are being made but cannot be
satisfied due to certain conditions within memcg (such as limits).

There may be some spam tracepoints in the trace pipe, which is a disadvantage
of this approach.

How important do you think it is to understand such situations? Or do
you suggest moving the begin() tracepoint after the memcg limits checks
and don't care about it?

> >  		mem_cgroup_calculate_protection(target_memcg, memcg);
> >  
> >  		if (mem_cgroup_below_min(target_memcg, memcg)) {
> > @@ -6491,6 +6495,9 @@ static void shrink_node_memcgs(pg_data_t *pgdat, struct scan_control *sc)
> >  		shrink_slab(sc->gfp_mask, pgdat->node_id, memcg,
> >  			    sc->priority);
> >  
> > +		trace_mm_vmscan_memcg_shrink_end(sc->nr_reclaimed - reclaimed,
> > +						 memcg);
> > +
> >  		/* Record the group's reclaim efficiency */
> >  		if (!sc->proactive)
> >  			vmpressure(sc->gfp_mask, memcg, false,
> > -- 
> > 2.36.0
> > 

-- 
Thank you,
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [Monitors]

  Powered by Linux