Re: [PATCH v3 22/28] Docs/x86/sgx: Add description for cgroup support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

On Wed, 12 Jul 2023 19:10:59 -0500, Randy Dunlap <rdunlap@xxxxxxxxxxxxx> wrote:

+
+
+Cgroup Support
+==============
+
+The "sgx_epc" resource within the Miscellaneous cgroup controller regulates
+distribution of SGX EPC memory, which is a subset of system RAM that
+is used to provide SGX-enabled applications with protected memory,
+and is otherwise inaccessible, i.e. shows up as reserved in
+/proc/iomem and cannot be read/written outside of an SGX enclave.
+
+Although current systems implement EPC by stealing memory from RAM,
+for all intents and purposes the EPC is independent from normal system
+memory, e.g. must be reserved at boot from RAM and cannot be converted
+between EPC and normal memory while the system is running.  The EPC is
+managed by the SGX subsystem and is not accounted by the memory
+controller.  Note that this is true only for EPC memory itself, i.e.
+normal memory allocations related to SGX and EPC memory, e.g. the
+backing memory for evicted EPC pages, are accounted, limited and
+protected by the memory controller.
+
+Much like normal system memory, EPC memory can be overcommitted via
+virtual memory techniques and pages can be swapped out of the EPC
+to their backing store (normal system memory allocated via shmem).
+The SGX EPC subsystem is analogous to the memory subsytem, and
+it implements limit and protection models for EPC memory.
+
+SGX EPC Interface Files
+-----------------------
+
+For a generic description of the Miscellaneous controller interface
+files, please see Documentation/admin-guide/cgroup-v2.rst
+
+All SGX EPC memory amounts are in bytes unless explicitly stated
+otherwise.  If a value which is not PAGE_SIZE aligned is written,
+the actual value used by the controller will be rounded down to
+the closest PAGE_SIZE multiple.
+
+  misc.capacity
+        A read-only flat-keyed file shown only in the root cgroup.
+        The sgx_epc resource will show the total amount of EPC
+        memory available on the platform.
+
+  misc.current
+        A read-only flat-keyed file shown in the non-root cgroups.
+        The sgx_epc resource will show the current active EPC memory
+        usage of the cgroup and its descendants. EPC pages that are
+ swapped out to backing RAM are not included in the current count.
+
+  misc.max
+        A read-write single value file which exists on non-root
+        cgroups. The sgx_epc resource will show the EPC usage
+        hard limit. The default is "max".
+
+        If a cgroup's EPC usage reaches this limit, EPC allocations,
+        e.g. for page fault handling, will be blocked until EPC can
+        be reclaimed from the cgroup.  If EPC cannot be reclaimed in
+        a timely manner, reclaim will be forced, e.g. by ignoring LRU.
+
+  misc.events
+	A read-write flat-keyed file which exists on non-root cgroups.
+	Writes to the file reset the event counters to zero.  A value
+	change in this file generates a file modified event.
+
+	  max
+		The number of times the cgroup has triggered a reclaim
+		due to its EPC usage approaching (or exceeding) its max
+		EPC boundary.

The indentation here (above) is a little confusing.
Is this formatted the way that is intended?

max here is an entry in the misc.events file. So it needs be indented a subsection. But I see spaces are used for indentation in sections above(misc.max, misc.current and misc.capacity), and tabs are used in this section. So I think maybe that's causing the confusing?
I'll fix them using all tabs.

Thanks
Haitao



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [Monitors]

  Powered by Linux