v11:
- Fix incorrect spacing in patch 7 and include documentation suggestions
by Michal.
- Move partition_is_populated() check to the last one in list of
conditions to be checked.
v10:
- Relax constraints for changes made to "cpuset.cpus"
and "cpuset.cpus.partition" as suggested. Now almost all changes
are allowed.
- Add patch 1 to signal that we may need to do additional work in
the future to relax the constraint that tasks' cpumask may need
some adjustment if child partitions are present.
- Add patch 2 for miscellaneous cleanups.
This patchset include the following enhancements to the cpuset v2
partition code.
1) Allow partitions that have no task to have empty effective cpus.
2) Relax the constraints on what changes are allowed in cpuset.cpus
and cpuset.cpus.partition. However, the partition remain invalid
until the constraints of a valid partition root is satisfied.
3) Add a new "isolated" partition type for partitions with no load
balancing which is available in v1 but not yet in v2.
4) Allow the reading of cpuset.cpus.partition to include a reason
string as to why the partition remain invalid.
In addition, the cgroup-v2.rst documentation file is updated and a self
test is added to verify the correctness the partition code.
The code diff from v10 is listed below.
Waiman Long (8):
cgroup/cpuset: Add top_cpuset check in update_tasks_cpumask()
cgroup/cpuset: Miscellaneous cleanups & add helper functions
cgroup/cpuset: Allow no-task partition to have empty
cpuset.cpus.effective
cgroup/cpuset: Relax constraints to partition & cpus changes
cgroup/cpuset: Add a new isolated cpus.partition type
cgroup/cpuset: Show invalid partition reason string
cgroup/cpuset: Update description of cpuset.cpus.partition in
cgroup-v2.rst
kselftest/cgroup: Add cpuset v2 partition root state test
Documentation/admin-guide/cgroup-v2.rst | 149 ++--
kernel/cgroup/cpuset.c | 718 +++++++++++-------
tools/testing/selftests/cgroup/Makefile | 5 +-
.../selftests/cgroup/test_cpuset_prs.sh | 674 ++++++++++++++++
tools/testing/selftests/cgroup/wait_inotify.c | 87 +++
5 files changed, 1304 insertions(+), 329 deletions(-)
create mode 100755 tools/testing/selftests/cgroup/test_cpuset_prs.sh
create mode 100644 tools/testing/selftests/cgroup/wait_inotify.c
--
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
index 94e1e3771830..9184a09e0fc9 100644
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@@ -2130,10 +2130,10 @@ Cpuset Interface Files
CPUs should be carefully distributed and bound to each of the
individual CPUs for optimal performance.
- The value shown in "cpuset.cpus.effective" of a partition root is
- the CPUs that the parent partition root can dedicate to the new
- partition root. They are subtracted from "cpuset.cpus.effective"
- of the parent and may be different from "cpuset.cpus"
+ The value shown in "cpuset.cpus.effective" of a partition root
+ is the CPUs that the partition root can dedicate to a potential
+ new child partition root. The new child subtracts available
+ CPUs from its parent "cpuset.cpus.effective".
A partition root ("root" or "isolated") can be in one of the
two possible states - valid or invalid. An invalid partition
@@ -2165,24 +2165,28 @@ Cpuset Interface Files
2) The parent cgroup is a valid partition root.
3) The "cpuset.cpus" is not empty and must contain at least
one of the CPUs from parent's "cpuset.cpus", i.e. they overlap.
- 4) The "cpuset.cpus.effective" must be a subset of "cpuset.cpus"
- and cannot be empty unless there is no task associated with
- this partition.
+ 4) The "cpuset.cpus.effective" must be a subset of "cpuset.cpus"
+ and cannot be empty unless there is no task associated with
+ this partition.
External events like hotplug or changes to "cpuset.cpus" can
cause a valid partition root to become invalid and vice versa.
Note that a task cannot be moved to a cgroup with empty
"cpuset.cpus.effective".
- For a valid partition root or an invalid partition root with
- the exclusivity rule enabled, changes made to "cpuset.cpus"
- that violate the exclusivity rule will not be allowed.
+ For a valid partition root or an invalid partition root with
+ the exclusivity rule enabled, changes made to "cpuset.cpus"
+ that violate the exclusivity rule will not be allowed.
A valid non-root parent partition may distribute out all its CPUs
to its child partitions when there is no task associated with it.
- Care must be taken to change a valid partition root to "member"
- as all its child partitions, if present, will become invalid.
+ Care must be taken to change a valid partition root to
+ "member" as all its child partitions, if present, will become
+ invalid causing disruption to tasks running in those child
+ partitions. These inactivated partitions could be recovered if
+ their parent is switched back to a partition root with a proper
+ set of "cpuset.cpus".
Poll and inotify events are triggered whenever the state of
"cpuset.cpus.partition" changes. That includes changes caused
diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index 90ee0e4d8d7e..261974f5bb3c 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -1283,9 +1283,12 @@ static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs,
* invalid to valid violates the exclusivity rule.
*
* The partcmd_enable and partcmd_disable commands are used by
- * update_prstate(). The partcmd_update command is used by
- * update_cpumasks_hier() with newmask NULL and update_cpumask() with
- * newmask set.
+ * update_prstate(). An error code may be returned and the caller will check
+ * for error.
+ *
+ * The partcmd_update command is used by update_cpumasks_hier() with newmask
+ * NULL and update_cpumask() with newmask set. The callers won't check for
+ * error and so partition_root_state and prs_error will be updated directly.
*/
static int update_parent_subparts_cpumask(struct cpuset *cs, int cmd,
struct cpumask *newmask,
@@ -1326,8 +1329,8 @@ static int update_parent_subparts_cpumask(struct cpuset *cs, int cmd,
* A parent can be left with no CPU as long as there is no
* task directly associated with the parent partition.
*/
- if (partition_is_populated(parent, cs) &&
- !cpumask_intersects(cs->cpus_allowed, parent->effective_cpus))
+ if (!cpumask_intersects(cs->cpus_allowed, parent->effective_cpus) &&
+ partition_is_populated(parent, cs))
return PERR_NOCPUS;
cpumask_copy(tmp->addmask, cs->cpus_allowed);
@@ -1361,9 +1364,10 @@ static int update_parent_subparts_cpumask(struct cpuset *cs, int cmd,
* Make partition invalid if parent's effective_cpus could
* become empty and there are tasks in the parent.
*/
- if (adding && partition_is_populated(parent, cs) &&
+ if (adding &&
cpumask_subset(parent->effective_cpus, tmp->addmask) &&
- !cpumask_intersects(tmp->delmask, cpu_active_mask)) {
+ !cpumask_intersects(tmp->delmask, cpu_active_mask) &&
+ partition_is_populated(parent, cs)) {
part_error = PERR_NOCPUS;
adding = false;
deleting = cpumask_and(tmp->delmask, cs->cpus_allowed,
@@ -1749,13 +1753,13 @@ static int update_cpumask(struct cpuset *cs, struct cpuset *trialcs,
/*
* Make sure that subparts_cpus, if not empty, is a subset of
- * cpus_allowed. Clear subparts_cpus if there is an error or
+ * cpus_allowed. Clear subparts_cpus if partition not valid or
* empty effective cpus with tasks.
*/
if (cs->nr_subparts_cpus) {
- if (cs->prs_err ||
- (partition_is_populated(cs, NULL) &&
- cpumask_subset(trialcs->effective_cpus, cs->subparts_cpus))) {
+ if (!is_partition_valid(cs) ||
+ (cpumask_subset(trialcs->effective_cpus, cs->subparts_cpus) &&
+ partition_is_populated(cs, NULL))) {
cs->nr_subparts_cpus = 0;
cpumask_clear(cs->subparts_cpus);
} else {
