Re: [PATCH 8/9] psi: pressure stall information for CPU, memory, and IO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

a quick update on that feedback before I send out v4:

On Fri, Aug 03, 2018 at 06:56:41PM +0200, Peter Zijlstra wrote:
> On Wed, Aug 01, 2018 at 11:19:57AM -0400, Johannes Weiner wrote:
> > +static bool test_state(unsigned int *tasks, int cpu, enum psi_states state)
> > +{
> > +	switch (state) {
> > +	case PSI_IO_SOME:
> > +		return tasks[NR_IOWAIT];
> > +	case PSI_IO_FULL:
> > +		return tasks[NR_IOWAIT] && !tasks[NR_RUNNING];
> > +	case PSI_MEM_SOME:
> > +		return tasks[NR_MEMSTALL];
> > +	case PSI_MEM_FULL:
> > +		/*
> > +		 * Since we care about lost potential, things are
> > +		 * fully blocked on memory when there are no other
> > +		 * working tasks, but also when the CPU is actively
> > +		 * being used by a reclaimer and nothing productive
> > +		 * could run even if it were runnable.
> > +		 */
> > +		return tasks[NR_MEMSTALL] &&
> > +			(!tasks[NR_RUNNING] ||
> > +			 cpu_curr(cpu)->flags & PF_MEMSTALL);
> 
> I don't think you can do this, there is nothing that guarantees
> cpu_curr() still exists.

As discussed later in this thread, I've replaced this with time
sampling from inside scheduler_tick(): in the unlikely event that
rq->curr is PF_MEMSTALL, it'll record TICK_NSEC worth of MEM_FULL.

However:

> > +		for (s = PSI_NONIDLE; s >= 0; s--) {
> > +			u32 time, delta;
> > +
> > +			time = READ_ONCE(groupc->times[s]);
> > +			/*
> > +			 * In addition to already concluded states, we
> > +			 * also incorporate currently active states on
> > +			 * the CPU, since states may last for many
> > +			 * sampling periods.
> > +			 *
> > +			 * This way we keep our delta sampling buckets
> > +			 * small (u32) and our reported pressure close
> > +			 * to what's actually happening.
> > +			 */
> > +			if (test_state(groupc->tasks, cpu, s)) {
> > +				/*
> > +				 * We can race with a state change and
> > +				 * need to make sure the state_start
> > +				 * update is ordered against the
> > +				 * updates to the live state and the
> > +				 * time buckets (groupc->times).
> > +				 *
> > +				 * 1. If we observe task state that
> > +				 * needs to be recorded, make sure we
> > +				 * see state_start from when that
> > +				 * state went into effect or we'll
> > +				 * count time from the previous state.
> > +				 *
> > +				 * 2. If the time delta has already
> > +				 * been added to the bucket, make sure
> > +				 * we don't see it in state_start or
> > +				 * we'll count it twice.
> > +				 *
> > +				 * If the time delta is out of
> > +				 * state_start but not in the time
> > +				 * bucket yet, we'll miss it entirely
> > +				 * and handle it in the next period.
> > +				 */
> > +				smp_rmb();
> > +				time += cpu_clock(cpu) - groupc->state_start;
> > +			}
> 
> The alternative is adding an update to scheduler_tick(), that would
> ensure you're never more than nr_cpu_ids * TICK_NSEC behind.

I wasn't able to convert *all* states to tick updates like this.

The reason is that, while testing rq->curr for PF_MEMSTALL is cheap,
other tasks associated with the rq could be from any cgroup in the
system. That means we'd have to do for_each_cgroup() on every tick to
keep the groupc->times that closely uptodate, and that wouldn't scale.
We tend to have hundreds of them, some setups have thousands.

Since we don't need to be *that* current, I left the on-demand update
inside the aggregator for now. It's a bit trickier, but much cheaper.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [Monitors]

  Powered by Linux