This could be due to a typo in the panel definition in Grafana (comparing the JSON of the working panel with the non-working one might provide more insights) or because the Prometheus Datasource used by Grafana isn't providing any metrics for ceph_osd_recovery_ops. To check the panel in Grafana, you can go to https://<manager_ip>:3000 then Dashboard / Ceph - Cluster / Recovery Rate / Inspect JSON Panel. To verify if Prometheus provide some metrics, you can go to https://<manager_ip>:9095 and request metrics for ceph_osd_recovery_ops. Check [1] if you need to set the Grafana password. Regards, Frédéric [1] https://www.ibm.com/docs/en/storage-ceph/6?topic=access-setting-admin-user-password-grafana ----- Le 21 Oct 24, à 13:09, Sanjay Mohan <sanjaymohan@xxxxxxxxxxxxx> a écrit : > Hi Frédéric, > Thank you for the response. > I tried disabling and re-enabling the module, and it seems that the recovery > metrics are indeed being collected, but still not displayed on the new > dashboard. Interestingly, I have another environment running Ceph 19.2.0 where > the recovery throughput is displayed correctly, but I’m unable to identify any > major differences between the two setups. > Do you have any additional suggestions for troubleshooting this issue further? > Thanks again for your help! > Best regards, > Sanjay Mohan > Software Defined Storage Engineer > sanjaymohan@xxxxxxxxxxxxx > From: Frédéric Nass <frederic.nass@xxxxxxxxxxxxxxxx> > Sent: 21 October 2024 1:22 PM > To: Sanjay Mohan <sanjaymohan@xxxxxxxxxxxxx> > Cc: ceph-users <ceph-users@xxxxxxx> > Subject: Re: Issue with Recovery Throughput Not Visible in Ceph > Dashboard After Upgrade to 19.2.0 (Squid) > Hi Sanjay, > I've just checked the dashboard of a v19.2.0 cluster, and the recovery > throughput is displayed correctly, as shown in the screenshot here [1]. You > might want to consider redeploying the dashboard. > Regards, > Frédéric. > [1] [ https://docs.ceph.com/en/latest/mgr/dashboard/ | > https://docs.ceph.com/en/latest/mgr/dashboard/ ] > ----- Le 19 Oct 24, à 19:23, Sanjay Mohan sanjaymohan@xxxxxxxxxxxxx a écrit : > > Dear Ceph Users, > > I hope this message finds you well. > > I recently performed an upgrade of my Ceph cluster, moving through the following > > versions: > > * 17.2.7 >> 18.2.0 >> 18.2.2 >> 18.2.4 >> 19.2.0 (Squid) > > After successfully upgrading to Ceph 19.2.0, I noticed an issue where the > > recovery throughput is no longer visible in the new Ceph dashboard. However, > > Old dashboard metrics and features seem to be working as expected. It is > > important to note that the recovery throughput was displayed properly in the > > previous version of the Ceph dashboard. I am using Cephadm for the > > installation, not Rook. > > Current behavior: > > * Recovery throughput metrics are not displayed in the new dashboard after > > upgrading to 19.2.0. > > Expected behavior: > > * The recovery throughput should be visible, as it was in previous versions of > > the Ceph dashboard. > > I am reaching out to inquire if there are any known issues, workarounds, or > > upcoming fixes for this. Your assistance in this matter would be greatly > > appreciated. > > Thank you for your time and support. I look forward to hearing from you soon. > > Best regards, > > Sanjay Mohan > > Software Defined Storage Engineer > > sanjaymohan@xxxxxxxxxxxxx > > [Amrita University] > > Disclaimer: The information transmitted in this email, including attachments, is > > intended only for the person(s) or entity to which it is addressed and may > > contain confidential and/or privileged material. Any review, retransmission, > > dissemination or other use of, or taking of any action in reliance upon this > > information by persons or entities other than the intended recipient is > > prohibited. Any views expressed in any message are those of the individual > > sender and may not necessarily reflect the views of Amrita Vishwa Vidyapeetham. > > If you received this in error, please contact the sender and destroy any copies > > of this information. > > _______________________________________________ > > ceph-users mailing list -- ceph-users@xxxxxxx > > To unsubscribe send an email to ceph-users-leave@xxxxxxx > Disclaimer: The information transmitted in this email, including attachments, is > intended only for the person(s) or entity to which it is addressed and may > contain confidential and/or privileged material. Any review, retransmission, > dissemination or other use of, or taking of any action in reliance upon this > information by persons or entities other than the intended recipient is > prohibited. Any views expressed in any message are those of the individual > sender and may not necessarily reflect the views of Amrita Vishwa Vidyapeetham. > If you received this in error, please contact the sender and destroy any copies > of this information. _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |