> On 15 Oct 2024, at 18:57, Kai Stian Olstad <ceph+list@xxxxxxxxxx> wrote: > > On Tue, Oct 15, 2024 at 05:36:15PM +0000, Mat Young wrote: >> Looking at the smartlog seems to show 63C current temp with 53C as worst case which doesn’t make a lot of sense. Could they drive be thermally throttling? > > That is the normalized value, shouldn't the value in RAW_VALUE be used instead? > There the current is 37 and min is 28 and high 42. > > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE > 190 Airflow_Temperature_Cel 0x0032 063 058 000 Old_age Always - 37 > 194 Temperature_Celsius 0x0022 063 058 000 Old_age Always - 37 (Min/Max 28/42) I'm quite sure the raw value is the actual degrees celsius. I also checked a couple of SSDs in my other servers and they are all in the low / middle 30 degrees. This should be okay and not lead to thermal throttling. I will report back when I've - done some I/O tests on the SSD to see if I can reproduce the issue without Ceph - replaced the SSD with a spare one of the same model to see if the problem reappears Thanks all! Tim _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |