I thought bluestore stored that stuff in non lvm mode? ________________________________________ From: Robert Sander <r.sander@xxxxxxxxxxxxxxxxxxx> Sent: Monday, September 2, 2024 11:35 PM To: ceph-users@xxxxxxx Subject: Re: Issue Replacing OSD with cephadm: Partition Path Not Accepted Check twice before you click! This email originated from outside PNNL. Hi, On 9/2/24 20:24, Herbert Faleiros wrote: > /usr/bin/docker: stderr ceph-volume lvm batch: error: /dev/sdb1 is a > partition, please pass LVs or raw block devices A Ceph OSD nowadays needs a logical volume because it stores crucial metadata in the LV tags. This helps to activate the OSD. IMHO you will have to redeploy the OSD to use LVM on the disk. It does not need to be the whole disk if there is other data on it. It should be sufficient to make /dev/sdb1 a PV of a new VG for the LV of the OSD. Regards -- Robert Sander Heinlein Consulting GmbH Schwedter Str. 8/9b, 10119 Berlin https://www.heinlein-support.de/ Tel: 030 / 405051-43 Fax: 030 / 405051-19 Amtsgericht Berlin-Charlottenburg - HRB 220009 B Geschäftsführer: Peer Heinlein - Sitz: Berlin _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |