first of all thanks to all!
Al supposed by Robert Sander, I get "permission denied" but even writing
with root privileges I get the same error.
As soon as I can I'll test your suggestions and update the thread.
Thanks again
On 4/24/24 16:05, Adam King wrote:
- Although I can mount the export I can't write on it
What error are you getting trying to do the write? The way you set
things up doesn't look to different than one of our integration tests
for ingress over nfs
(https://github.com/ceph/ceph/blob/main/qa/suites/orch/cephadm/smoke-roleless/2-services/nfs-ingress.yaml)
and that test tests a simple read/write to the export after
creating/mounting it.
- I can't understand how to use the sdc disks for journaling
you should be able to specify a `journal_devices` section in an OSD
spec. For example
*service_type: osd
service_id: foo
placement:
hosts:
- vm-00
spec:
data_devices:
paths:
- /dev/vdb
journal_devices:
paths:
- /dev/vdc*
that will make non-colocated OSDs where the devices from the
journal_devices section are used as journal devices for the OSDs on
the devices in the data_devices section. Although I'd recommend
looking through
https://docs.ceph.com/en/latest/cephadm/services/osd/#advanced-osd-service-specifications
<https://docs.ceph.com/en/latest/cephadm/services/osd/#advanced-osd-service-specifications> and
see if there are any other filtering options than the path that can be
used first. It's possible the path the device gets can change on
reboot and you could end up with cepadm using a device you don't want
it to for this as that other device gets the path another device held
previously.
- I can't understand the concept of "pseudo path"
I don't know at a low level either, but it seems to just be the path
nfs-ganesha will present to the user. There is another argument to
`ceph nfs export create` which is just "path" rather than pseudo-path
that marks what actual path within the cephfs the export is mounted
on. It's optional and defaults to "/" (so the export you made is
mounted at the root of the fs). I think that's the one that really
matters. The pseudo-path seems to just act like a user facing name for
the path.
On Wed, Apr 24, 2024 at 3:40 AM Roberto Maggi @ Debian
<debian108@xxxxxxxxx> wrote:
Hi you all,
I'm almost new to ceph and I'm understanding, day by day, why the
official support is so expansive :)
I setting up a ceph nfs network cluster whose recipe can be found
here
below.
#######################
--> cluster creation cephadm bootstrap --mon-ip 10.20.20.81
--cluster-network 10.20.20.0/24 <http://10.20.20.0/24> --fsid
$FSID --initial-dashboard-user adm \
--initial-dashboard-password 'Hi_guys' --dashboard-password-noupdate
--allow-fqdn-hostname --ssl-dashboard-port 443 \
--dashboard-crt /etc/ssl/wildcard.it/wildcard.it.crt
<http://wildcard.it/wildcard.it.crt> --dashboard-key
/etc/ssl/wildcard.it/wildcard.it.key
<http://wildcard.it/wildcard.it.key> \
--allow-overwrite --cleanup-on-failure
cephadm shell --fsid $FSID -c /etc/ceph/ceph.conf -k
/etc/ceph/ceph.client.admin.keyring
cephadm add-repo --release reef && cephadm install ceph-common
--> adding hosts and set labels
for IP in $(grep ceph /etc/hosts | awk '{print $1}') ; do
ssh-copy-id -f
-i /etc/ceph/ceph.pub root@$IP ; done
ceph orch host add cephstage01 10.20.20.81 --labels
_admin,mon,mgr,prometheus,grafana
ceph orch host add cephstage02 10.20.20.82 --labels
_admin,mon,mgr,prometheus,grafana
ceph orch host add cephstage03 10.20.20.83 --labels
_admin,mon,mgr,prometheus,grafana
ceph orch host add cephstagedatanode01 10.20.20.84 --labels
osd,nfs,prometheus
ceph orch host add cephstagedatanode02 10.20.20.85 --labels
osd,nfs,prometheus
ceph orch host add cephstagedatanode03 10.20.20.86 --labels
osd,nfs,prometheus
--> network setup and daemons deploy
ceph config set mon public_network 10.20.20.0/24,192.168.7.0/24
<http://10.20.20.0/24,192.168.7.0/24>
ceph orch apply mon
--placement="cephstage01:10.20.20.81,cephstage02:10.20.20.82,cephstage03:10.20.20.83"
ceph orch apply mgr
--placement="cephstage01:10.20.20.81,cephstage02:10.20.20.82,cephstage03:10.20.20.83"
ceph orch apply prometheus
--placement="cephstage01:10.20.20.81,cephstage02:10.20.20.82,cephstage03:10.20.20.83,cephstagedatanode01:10.20.20.84,cephstagedatanode02:10.20.20.85,cephstagedatanode03:10.20.20.86"
ceph orch apply grafana
--placement="cephstage01:10.20.20.81,cephstage02:10.20.20.82,cephstage03:10.20.20.83,cephstagedatanode01:10.20.20.84,cephstagedatanode02:10.20.20.85,cephstagedatanode03:10.20.20.86"
ceph orch apply node-exporter
ceph orch apply alertmanager
ceph config set mgr mgr/cephadm/secure_monitoring_stack true
--> disks and osd setup
for IP in $(grep cephstagedatanode/etc/hosts | awk '{print $1}') ; do
ssh root@$IP "hostname && wipefs -a -f /dev/sdb&& wipefs -a -f
/dev/sdc"; done
ceph config set mgr mgr/cephadm/device_enhanced_scan true
for IP in $(grep cephstagedatanode/etc/hosts | awk '{print $1}') ;
doceph orch device ls --hostname=$IP --wide --refresh ; done
for IP in $(grep cephstagedatanode/etc/hosts | awk '{print $1}') ;
doceph orch device zap $IP /dev/sdb; done
for IP in $(grep cephstagedatanode/etc/hosts | awk '{print $1}') ;
doceph orch device zap $IP /dev/sdc ; done
for IP in $(grep cephstagedatanode/etc/hosts | awk '{print $1}') ;
doceph orch daemon add osd $IP:/dev/sdb ; done
for IP in $(grep cephstagedatanode/etc/hosts | awk '{print $1}') ;
doceph orch daemon add osd $IP:/dev/sdc ; done
--> ganesha nfs cluster
ceph mgr module enable nfs
ceph fs volume create vol1
ceph nfs cluster create nfs-cephfs
"cephstagedatanode01,cephstagedatanode02,cephstagedatanode03"
--ingress
--virtual-ip 192.168.7.80 --ingress-mode default
ceph nfs export create cephfs --cluster-id nfs-cephfs
--pseudo-path /mnt
--fsname vol1
--> nfs mount
mount -t nfs -o nfsvers=4.1,proto=tcp 192.168.7.80:/mnt /mnt/ceph
is my recipe correct?
the cluster is set up by 3 mon/mgr nodes and 3 osd/nfs nodes, on the
latters I installed one 3tb ssd, for the data, and one 300gb ssd
for the
journaling but
my problems are :
- Although I can mount the export I can't write on it
- I can't understand how to use the sdc disks for journaling
- I can't understand the concept of "pseudo path"
here below you can find the json output of the exports
--> check
ceph nfs export ls nfs-cephfs
ceph nfs export info nfs-cephfs /mnt
------------------------------------
json file
---------
{
"export_id": 1,
"path": "/",
"cluster_id": "nfs-cephfs",
"pseudo": "/mnt",
"access_type": "RW",
"squash": "none",
"security_label": true,
"protocols": [
4
],
"transports": [
"TCP"
],
"fsal": {
"name": "CEPH",
"user_id": "nfs.nfs-cephfs.1",
"fs_name": "vol1"
},
"clients": []
}
------------------------------------
Thanks in advance
Rob
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
