Hi Chip, Looks like not all mons are up or couldn't reach each other via network to form quorum. Make sure all nodes can reach each other and check the mon logs. Furthermore some info about pvecm status pveceph status or just ceph status would be helpful Cheers Stephan Am Do., 22. Feb. 2024 um 14:28 Uhr schrieb Schweiss, Chip < chip@xxxxxxxxxxxxx>: > I had to temporarily disconnect the network on my entire Ceph cluster, so I > prepared the cluster by following what appears to be some incomplete > advice. > > I did the following before disconnecting the network: > #ceph osd set noout > #ceph osd set norecover > #ceph osd set norebalance > #ceph osd set nobackfill > #ceph osd set nodown > #ceph osd set pause > > Now, all the ceph services are still running, but I cannot undo any flags: > > root@proxmox01:~# ceph osd unset pause > 2024-02-22T13:16:02.220+0000 7f0aab5a26c0 0 monclient(hunting): > authenticate timed out after 300 > > [errno 110] RADOS timed out (error connecting to the cluster) > > Any advice on how to recover would be greatly appreciated. > > Thank you, > -Chip > _______________________________________________ > ceph-users mailing list -- ceph-users@xxxxxxx > To unsubscribe send an email to ceph-users-leave@xxxxxxx > _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |