Re: ._handle_peer_banner peer [v2:***,v1:***] is using msgr V1 protocol

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

this sounds familiar, I believe this means that (some) of your clients are using msgr_v1. I assume that your MONs are configured to use both v1 and v2? I read somewhere that kernel clients might not support v2, but I'm not really sure. But there are a couple of threads discussing this.

Regards,
Eugen

Zitat von Frank Schilder <frans@xxxxxx>:

Hi all,

on an octopus latest cluster I see a lot of these log messages:

Jan 13 20:00:25 ceph-21 journal: 2023-01-13T20:00:25.366+0100 7f47702b8700 -1 --2- [v2:192.168.16.96:6826/5724,v1:192.168.16.96:6827/5724] >> [v2:192.168.16.93:6928/3503064,v1:192.168.16.93:6929/3503064] conn(0x55c867624400 0x55c7e9dfa800 unknown :-1 s=BANNER_CONNECTING pgs=22826 cs=73364 l=0 rev1=1 rx=0 tx=0)._handle_peer_banner peer [v2:192.168.16.93:6928/3503064,v1:192.168.16.93:6929/3503064] is using msgr V1 protocol

These addresses are on the replication network and both hosts are OSD hosts.

What is the reason for these messages and how can I fix it?

Thanks a lot!
=================
Frank Schilder
AIT Risø Campus
Bygning 109, rum S14
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx


_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx




[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux