Hi,
can you share the output of
storage01:~ # ceph orch ls osd
Thanks,
Eugen
Zitat von Wyll Ingersoll <wyllys.ingersoll@xxxxxxxxxxxxxx>:
When adding a new OSD to a ceph orchestrated system (16.2.9) on a
storage node that has a specification profile that dictates which
devices to use as the db_devices (SSDs), the newly added OSDs seem
to be ignoring the db_devices (there are several available) and
putting the data and db/wal on the same device.
We installed the new disk (HDD) and then ran "ceph orch device zap
/dev/xyz --force" to initialize the addition process.
The OSDs that were added originally on that node were layed out
correctly, but the new ones seem to be ignoring the OSD service spec.
How can we make sure the new devices added are layed out correctly?
thanks,
Wyllys
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
