Hi, When I have no luck yet solving the issue, but I can add some more information. The system pools ".rgw.root" and "default.rgw.log" are not created. I have created them manually, Now there is more log activity, but still getting the same error message in the log: rgw main: rgw_init_ioctx ERROR: librados::Rados::pool_create returned (34) Numerical result out of range (this can be due to a pool or placement group misconfiguration, e.g. pg_num < pgp_num or mon_max_pg_per_osd exceeded) I can't find the correct pool to create manually. Thanks for any help Best Robert On Tue, Jul 12, 2022 at 5:22 PM Robert Reihs <robert.reihs@xxxxxxxxx> wrote: > Hi, > > We have a problem with deloing radosgw vi cephadm. We have a Ceph cluster > with 3 nodes deployed via cephadm. Pool creation, cephfs and block storage > are working. > > ceph version 17.2.1 (ec95624474b1871a821a912b8c3af68f8f8e7aa1) quincy > (stable) > > The service specs is like this for the rgw: > > --- > > service_type: rgw > > service_id: rgw > > placement: > > count: 3 > > label: "rgw" > > --- > > service_type: ingress > > service_id: rgw.rgw > > placement: > > count: 3 > > label: "ingress" > > spec: > > backend_service: rgw.rgw > > virtual_ip: [IPV6] > > virtual_interface_networks: [IPV6 CIDR] > > frontend_port: 8080 > > monitor_port: 1967 > > The error I get in the logfiles: > > 0 deferred set uid:gid to 167:167 (ceph:ceph) > > 0 ceph version 17.2.1 (ec95624474b1871a821a912b8c3af68f8f8e7aa1) quincy > (stable), process radosgw, pid 2 > > 0 framework: beast > > 0 framework conf key: port, val: 80 > > 1 radosgw_Main not setting numa affinity > > 1 rgw_d3n: rgw_d3n_l1_local_datacache_enabled=0 > > 1 D3N datacache enabled: 0 > > 0 rgw main: rgw_init_ioctx ERROR: librados::Rados::pool_create returned > (34) Numerical result out of range (this can be due to a pool or placement > group misconfiguration, e.g. pg_num < pgp_num or mon_max_pg_per_osd > exceeded) > > 0 rgw main: failed reading realm info: ret -34 (34) Numerical result out > of range > > 0 rgw main: ERROR: failed to start notify service ((34) Numerical result > out of range > > 0 rgw main: ERROR: failed to init services (ret=(34) Numerical result out > of range) > > -1 Couldn't init storage provider (RADOS) > > I have for testing set the pg_num and pgp_num to 16 and the > mon_max_pg_per_osd to 1000 and still getting the same error. I have also > tried creating the rgw with ceph command, same error. Pool creation is > working, I created multiple other pools and there was no problem. > > Thanks for any help. > > Best > > Robert > > The 5 fails services are 3 from the rgw and 2 haproxy for the rgw, there > is only one running: > > ceph -s > > cluster: > > id: 40ddf > > health: HEALTH_WARN > > 5 failed cephadm daemon(s) > > > > services: > > mon: 3 daemons, quorum ceph-01,ceph-02,ceph-03 (age 4d) > > mgr: ceph-01.hbvyqi(active, since 4d), standbys: ceph-02.pqtxbv > > mds: 1/1 daemons up, 3 standby > > osd: 6 osds: 6 up (since 4d), 6 in (since 4d) > > > > data: > > volumes: 1/1 healthy > > pools: 5 pools, 65 pgs > > objects: 87 objects, 170 MiB > > usage: 1.4 GiB used, 19 TiB / 19 TiB avail > > pgs: 65 active+clean > > -- Robert Reihs Jakobsweg 22 8046 Stattegg AUSTRIA mobile: +43 (664) 51 035 90 robert.reihs@xxxxxxxxx _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |