Re: OSD crash with end_of_buffer + bad crc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le 2022-04-27 08:43, Konstantin Shalygin a écrit :
Just for memo record, what is your network card and driver?

ethtool -i eth0

Of course.
It's a Dell card, Broadcom Adv. Dual 25Gb Ethernet.


$ sudo ethtool -i enp129s0f1np1
driver: bnxt_en
version: 1.8.0
firmware-version: 218.0.219.13/pkg 21.85.21.92
expansion-rom-version:
bus-info: 0000:81:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: no
supports-priv-flags: no

_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx




[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux