Re: Is it normal Ceph reports "Degraded data redundancy" in normal use?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18.04.2022 21:35, Wesley Dillingham wrote:
If you mark an osd "out" but not down / you dont stop the daemon do the PGs
go remapped or do they go degraded then as well?

First I made sure the balancer was active, then I marked one osd "out", "ceph osd out 34" and check status every 2 seconds for 2 minutes, no degraded messages. The only new messages in ceph -s was 12 remapped pgs and "11 active-remapped+backfilling" and "1 active+remapped+backfill_wait"

Previously I had to set all osd(15 disks) on a host to out and there was no issue with PG in degraded state.


--
Kai Stian Olstad
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx



[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux