thanks, we have done by following commands: ceph-volume lvm prepare --no-systemd --bluestore --data /dev/sdh --block.db /dev/nvme0n1 --block.db-size 73014444032 we should ssh the host and execute the command for each OSD. if we have to add many OSD, it will take lots of time. On Mon, Apr 4, 2022 at 3:42 PM Eugen Block <eblock@xxxxxx> wrote: > Hi, > > this is handled by ceph-volume, do you find anything helpful in > /var/log/ceph/<CEPH_FSID>/ceph-volume.log? Also check the cephadm.log > for any hints. > > > Zitat von 彭勇 <ppyy@xxxxxxxxxx>: > > > we have a running ceph, 16.2.7, with SATA OSD and DB on nvme. > > and we insert some SATA to host, and the status of new host is AVAILABLE. > > then we apply the osd-spec.yml, it can't create the OSD automatically. > > > > # ceph orch device ls > > HOST PATH TYPE DEVICE ID > > SIZE AVAILABLE REJECT REASONS > > h172-18-100-100 /dev/nvme0n1 ssd INTEL > SSDPF2KX038TZ_PHAC1036009Z3P8AGN > > 3840G LVM detected, locked > > h172-18-100-100 /dev/sdb hdd ST16000NM000G-2K_ZL2CB8ZR > > 16.0T Insufficient space (<10 extents) on vgs, LVM > detected, > > locked > > h172-18-100-100 /dev/sdc hdd ST16000NM000G-2K_ZL2CB0J2 > > 16.0T Insufficient space (<10 extents) on vgs, LVM > detected, > > locked > > h172-18-100-100 /dev/sdd hdd ST16000NM000G-2K_ZL2CBFSF > > 16.0T Insufficient space (<10 extents) on vgs, LVM > detected, > > locked > > h172-18-100-100 /dev/sde hdd ST16000NM000G-2K_ZL2CAYQB > > 16.0T Insufficient space (<10 extents) on vgs, LVM > detected, > > locked > > h172-18-100-100 /dev/sdf hdd ST16000NM000G-2K_ZL2CBEMC > > 16.0T Yes > > h172-18-100-100 /dev/sdg hdd ST16000NM000G-2K_ZL2C427J > > 16.0T Yes > > h172-18-100-100 /dev/sdh hdd ST16000NM000G-2K_ZL2CAZCZ > > 16.0T Yes > > h172-18-100-100 /dev/sdi hdd ST16000NM000G-2K_ZL2CBM7M > > 16.0T Yes > > > > > > > > osd-spec.yml： > > > > service_type: osd > > service_id: osd-spec > > placement: > > host_pattern: '*' > > spec: > > objectstore: bluestore > > block_db_size: 73014444032 > > data_devices: > > rotational: 1 > > db_devices: > > rotational: 0 > > > > ceph orch apply osd -i osd-spec.yml --dry-run > > > > > > > > > > -- > > Peng Yong > > _______________________________________________ > > ceph-users mailing list -- ceph-users@xxxxxxx > > To unsubscribe send an email to ceph-users-leave@xxxxxxx > > > > _______________________________________________ > ceph-users mailing list -- ceph-users@xxxxxxx > To unsubscribe send an email to ceph-users-leave@xxxxxxx > -- 彭勇 (Peng Yong) _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |