Re: slow pacific osd startup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/02/2022 15:05, Josh Baergen wrote:
In particular, do you have bluestore_fsck_quick_fix_on_mount set to true?
no, that's set to false.

Andrej

Josh

On Fri, Feb 11, 2022 at 2:08 AM Eugen Block <eblock@xxxxxx> wrote:
Hi,

is there a difference in PG size on new and old OSDs or are they all
similar in size? Is there some fsck enabled during OSD startup?


Zitat von Andrej Filipcic <andrej.filipcic@xxxxxx>:

Hi,

with 16.2.7, some OSDs are very slow to start, eg it takes ~30min
for an hdd (12TB, 5TB used) to become active. After initialization,
there is 20-40min of extreme reading at ~150MB/s from the OSD, just
after
-------
Uptime(secs): 602.2 total, 0.0 interval
Flush(GB): cumulative 0.101, interval 0.000
AddFile(GB): cumulative 0.000, interval 0.000
AddFile(Total Files): cumulative 0, interval 0
AddFile(L0 Files): cumulative 0, interval 0
AddFile(Keys): cumulative 0, interval 0
Cumulative compaction: 0.72 GB write, 1.22 MB/s write, 0.71 GB read,
1.21 MB/s read, 33.1 seconds
Interval compaction: 0.00 GB write, 0.00 MB/s write, 0.00 GB read,
0.00 MB/s read, 0.0 seconds
Stalls(count): 0 level0_slowdown, 0 level0_slowdown_with_compaction,
0 level0_numfiles, 0 level0_numfiles_with_compaction, 0 stop for
pending_compaction_bytes, 0 slowdown for pending_compaction_bytes, 0
memtable_compaction, 0 memtable_slowdown, interval 0 total count

** File Read Latency Histogram By Level [default] **
-------
and the log (no special debug conf) is not updated during that time.

These slow OSDs were created with nautilus, and I am not quite sure
when this slow startup appeared. the newer OSDs are fast to start.
The minimum OSD release is set to pacific.

Any hints before I start debuging the problem? The history of installs:
2020-09-15T09:42:29Z SUBDEBUG Installed: ceph-base-2:15.2.4-0.el8.x86_64
2020-12-23T11:02:29Z SUBDEBUG Upgrade: ceph-base-2:15.2.8-0.el8.x86_64
2021-08-31T08:46:29Z SUBDEBUG Upgrade: ceph-base-2:16.2.5-0.el8.x86_64
2022-02-09T09:38:42+0100 SUBDEBUG Upgrade: ceph-base-2:16.2.7-0.el8.x86_64

Best regards,
Andrej

--
_____________________________________________________________
    prof. dr. Andrej Filipcic,   E-mail: Andrej.Filipcic@xxxxxx
    Department of Experimental High Energy Physics - F9
    Jozef Stefan Institute, Jamova 39, P.o.Box 3000
    SI-1001 Ljubljana, Slovenia
    Tel.: +386-1-477-3674    Fax: +386-1-425-7074
-------------------------------------------------------------

_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx


_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx


--
_____________________________________________________________
   prof. dr. Andrej Filipcic,   E-mail: Andrej.Filipcic@xxxxxx
   Department of Experimental High Energy Physics - F9
   Jozef Stefan Institute, Jamova 39, P.o.Box 3000
   SI-1001 Ljubljana, Slovenia
   Tel.: +386-1-477-3674    Fax: +386-1-425-7074
-------------------------------------------------------------

_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx



[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux