Hi, I seem to have some stale monitoring alerts in my Mgr UI, which do not want to go away. For example (I'm also attaching an image for your convenience): MTU Mismatch: Node ceph04 has a different MTU size (9000) than the median value on device storage-int. The alerts appears to be active, but doesn't reflect the actual situation: 06:00 [root@ceph04 ~]# ip li li | grep -E "ens2f0|ens3f0|8: bond0|storage-int" 4: ens3f0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond0 state UP mode DEFAULT group default qlen 1000 6: ens2f0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond0 state UP mode DEFAULT group default qlen 1000 8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 9000 qdisc noqueue state UP mode DEFAULT group default qlen 1000 10: storage-int@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc noqueue state UP mode DEFAULT group default qlen 1000 I have similarly stuck alerts about 'high pg count deviation', which triggered during the cluster rebalance but somehow never cleared, despite all operations finished successfully and CLI tools report that the cluster is healthy. How can I clear these alerts? I would very much appreciate any advice. Best regards, Zakhar _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |