Hello, I want to ask if the correct config in ceph.conf for cluster network is: cluster network = Or cluster_network = Thanks Il Ven 23 Lug 2021, 17:36 Dimitri Savineau <dsavinea@xxxxxxxxxx> ha scritto: > Hi, > > This looks similar to https://tracker.ceph.com/issues/46687 > > Since you want to use hdd devices to bluestore data and ssd devices for > bluestore db, I would suggest using the rotational [1] filter isn't dealing > with the size filter. > > --- > service_type: osd > service_id: osd_spec_default > placement: > host_pattern: '*' > data_devices: > rotational: 1 > db_devices: > rotational: 0 > ... > > Could you give this a try ? > > [1] https://docs.ceph.com/en/latest/cephadm/osd/#rotational > > Regards, > > Dimitri > > On Fri, Jul 23, 2021 at 7:12 AM Gargano Andrea <andrea.gargano@xxxxxxxxxx> > wrote: > > > Hi all, > > we are trying to install ceph on ubuntu 20.04 but we are not able to > > create OSD. > > Entering in cephadm shell we can see the following: > > > > root@tst2-ceph01:/# ceph -s > > cluster: > > id: 8b937a98-eb86-11eb-8509-c5c80111fd98 > > health: HEALTH_ERR > > Module 'cephadm' has failed: No filters applied > > OSD count 0 < osd_pool_default_size 3 > > > > services: > > mon: 3 daemons, quorum tst2-ceph01,tst2-ceph03,tst2-ceph02 (age 2h) > > mgr: tst2-ceph01.kwyejx(active, since 3h), standbys: > tst2-ceph02.qrpuzp > > osd: 0 osds: 0 up (since 115m), 0 in (since 105m) > > > > data: > > pools: 0 pools, 0 pgs > > objects: 0 objects, 0 B > > usage: 0 B used, 0 B / 0 B avail > > pgs: > > > > > > root@tst2-ceph01:/# ceph orch device ls > > Hostname Path Type Serial Size > > Health Ident Fault Available > > tst2-ceph01 /dev/sdb hdd 600508b1001c1960d834c222fb64f2ea 1200G > > Unknown N/A N/A Yes > > tst2-ceph01 /dev/sdc hdd 600508b1001c36e812fb5d14997f5f47 1200G > > Unknown N/A N/A Yes > > tst2-ceph01 /dev/sdd hdd 600508b1001c01a0297ac2c5e8039063 1200G > > Unknown N/A N/A Yes > > tst2-ceph01 /dev/sde hdd 600508b1001cf4520d0f0155d0dd31ad 1200G > > Unknown N/A N/A Yes > > tst2-ceph01 /dev/sdf hdd 600508b1001cc911d4f570eba568a8d0 1200G > > Unknown N/A N/A Yes > > tst2-ceph01 /dev/sdg hdd 600508b1001c410bd38e6c55807bea25 1200G > > Unknown N/A N/A Yes > > tst2-ceph01 /dev/sdh ssd 600508b1001cdb21499020552589eadb 400G > > Unknown N/A N/A Yes > > tst2-ceph02 /dev/sdb hdd 600508b1001ce1f33b63f8859aeac9b4 1200G > > Unknown N/A N/A Yes > > tst2-ceph02 /dev/sdc hdd 600508b1001c0b4dbfa794d2b38f328e 1200G > > Unknown N/A N/A Yes > > tst2-ceph02 /dev/sdd hdd 600508b1001c145b8de4e4e7cc9129d5 1200G > > Unknown N/A N/A Yes > > tst2-ceph02 /dev/sde hdd 600508b1001c1d81d0aaacfdfd20f5f1 1200G > > Unknown N/A N/A Yes > > tst2-ceph02 /dev/sdf hdd 600508b1001c28d2a2c261449ca1a3cc 1200G > > Unknown N/A N/A Yes > > tst2-ceph02 /dev/sdg hdd 600508b1001c1f9a964b1513f70b51b3 1200G > > Unknown N/A N/A Yes > > tst2-ceph02 /dev/sdh ssd 600508b1001c8040dd5cf17903940177 400G > > Unknown N/A N/A Yes > > tst2-ceph03 /dev/sdb hdd 600508b1001c900ef43d7745db17d5cc 1200G > > Unknown N/A N/A Yes > > tst2-ceph03 /dev/sdc hdd 600508b1001cf1b79f7dc2f79ab2c90b 1200G > > Unknown N/A N/A Yes > > tst2-ceph03 /dev/sdd hdd 600508b1001c83c09fe03eb17e555f5f 1200G > > Unknown N/A N/A Yes > > tst2-ceph03 /dev/sde hdd 600508b1001c9c4c5db12fabf54a4ff3 1200G > > Unknown N/A N/A Yes > > tst2-ceph03 /dev/sdf hdd 600508b1001cdaa7dc09d751262e2cc9 1200G > > Unknown N/A N/A Yes > > tst2-ceph03 /dev/sdg hdd 600508b1001c8f435a08b7eae4a1323e 1200G > > Unknown N/A N/A Yes > > tst2-ceph03 /dev/sdh ssd 600508b1001c5e24f822d6790a5df65b 400G > > Unknown N/A N/A Yes > > > > > > we wrote the following spec file: > > > > service_type: osd > > service_id: osd_spec_default > > placement: > > host_pattern: '*' > > data_devices: > > size: '1200GB' > > db_devices: > > size: '400GB' > > > > but running, the following appears: > > > > root@tst2-ceph01:/# ceph orch apply osd -i /spec.yml --dry-run > > WARNING! Dry-Runs are snapshots of a certain point in time and are bound > > to the current inventory setup. If any on these conditions changes, the > > preview will be invalid. Please make sure to have a minimal > > timeframe between planning and applying the specs. > > ################ > > OSDSPEC PREVIEWS > > ################ > > Preview data is being generated.. Please re-run this command in a bit. > > root@tst2-ceph01:/# ceph orch apply osd -i /spec.yml --dry-run > > WARNING! Dry-Runs are snapshots of a certain point in time and are bound > > to the current inventory setup. If any on these conditions changes, the > > preview will be invalid. Please make sure to have a minimal > > timeframe between planning and applying the specs. > > ################ > > OSDSPEC PREVIEWS > > ################ > > Preview data is being generated.. Please re-run this command in a bit. > > > > > > It's seems that yml file is not read. > > Any help please? > > > > Thank you, > > > > Andrea > > > > _______________________________________________ > > ceph-users mailing list -- ceph-users@xxxxxxx > > To unsubscribe send an email to ceph-users-leave@xxxxxxx > > > > > _______________________________________________ > ceph-users mailing list -- ceph-users@xxxxxxx > To unsubscribe send an email to ceph-users-leave@xxxxxxx > _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |