Thanks! I guess the message in ceph health detail should be changed then. Is this already on the list? Best regards, ================= Frank Schilder AIT Risø Campus Bygning 109, rum S14 ________________________________________ From: Eugen Block <eblock@xxxxxx> Sent: 06 December 2020 12:41:00 To: ceph-users@xxxxxxx Subject: Re: ceph daemon mgr.# dump_osd_network: no valid command found Hi Frank, I responded to a recent thread [1] about this, you should be able to run that command for an OSD daemon. Regards, Eugen [1] https://lists.ceph.io/hyperkitty/list/ceph-users@xxxxxxx/message/A3NZ4DBMJT2KZQG5SMK6YXYZHIIBFBJW/ Zitat von Frank Schilder <frans@xxxxxx>: > Dear cephers, > > I see "Long heartbeat ping times on back interface seen" in ceph > status and ceph health detail says that I should "Use ceph daemon > mgr.# dump_osd_network for more information". I tries, but it seems > this command was removed during upgrade from mimic 13.2.8 to 13.2.10: > > [root@ceph-01 ~]# ceph daemon mgr.ceph-01 dump_osd_network > no valid command found; 10 closest matches: > log flush > log dump > git_version > get_command_descriptions > kick_stale_sessions > help > config unset <var> > config show > dump_mempools > dump_cache > admin_socket: invalid command > > Has this been replaced by some other command? > > Best regards, > ================= > Frank Schilder > AIT Risø Campus > Bygning 109, rum S14 > _______________________________________________ > ceph-users mailing list -- ceph-users@xxxxxxx > To unsubscribe send an email to ceph-users-leave@xxxxxxx _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |