Peter; As with many things in Ceph, I don’t believe it’s a hard and fast rule (i.e. noon power of 2 will work). I believe the issues are performance, and balance. I can't confirm that. Perhaps someone else on the list will add their thoughts. Has your warning gone away? Thank you, Dominic L. Hilsbos, MBA Director – Information Technology Perform Air International Inc. DHilsbos@xxxxxxxxxxxxxx www.PerformAir.com From: Peter Eisch [mailto:peter.eisch@xxxxxxxxxxxxxxx] Sent: Friday, October 23, 2020 5:41 AM To: Dominic Hilsbos; ceph-users@xxxxxxx Subject: Re: Large map object found Perfect -- many thanks Dominic! I haven't found a doc which notes the --num-shards needs to be a power of two. It isn't I don't believe you -- just haven't seen that anywhere. peter Peter Eisch Senior Site Reliability Engineer T 1.612.445.5135 virginpulse.com Australia | Bosnia and Herzegovina | Brazil | Canada | Singapore | Switzerland | United Kingdom | USA Confidentiality Notice: The information contained in this e-mail, including any attachment(s), is intended solely for use by the designated recipient(s). Unauthorized use, dissemination, distribution, or reproduction of this message by anyone other than the intended recipient(s), or a person designated as responsible for delivering such messages to the intended recipient, is strictly prohibited and may be unlawful. This e-mail may contain proprietary, confidential or privileged information. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Virgin Pulse, Inc. If you have received this message in error, or are not the named recipient(s), please immediately notify the sender and delete this e-mail message. v2.66 On 10/22/20, 10:24 AM, "DHilsbos@xxxxxxxxxxxxxx" <DHilsbos@xxxxxxxxxxxxxx> wrote: Peter; I believe shard counts should be powers of two. Also, resharding makes the buckets unavailable, but occurs very quickly. As such it is not done in the background, but in the foreground, for a manual reshard. Notice the statement: "reshard of bucket <bucket_name> from <original_object> to <new_object> completed successfully." It's done. The warning notice won't go away until a scrub is completed to determine that a large OMAP object no longer exists. Thank you, Dominic L. Hilsbos, MBA Director – Information Technology Perform Air International Inc. DHilsbos@xxxxxxxxxxxxxx https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.performair.com%2F&data=04%7C01%7Cpeter.eisch%40virginpulse.com%7C14386968705f4571e9a008d8769e9a16%7Cb123a16e892b4cf6a55a6f8c7606a035%7C0%7C0%7C637389770850660951%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=AUPmwxIgzRhmwpg2MM6b%2FzpPyR84%2F92OFsW9UrKw%2Fes%3D&reserved=0 From: Peter Eisch [mailto:peter.eisch@xxxxxxxxxxxxxxx] Sent: Thursday, October 22, 2020 8:04 AM To: Dominic Hilsbos; ceph-users@xxxxxxx Subject: Re: Large map object found Thank you! This was helpful. I opted for a manual reshard: [root@cephmon-s03 ~]# radosgw-admin bucket reshard --bucket=d2ff913f5b6542cda307c9cd6a95a214/NAME_segments --num-shards=3 tenant: d2ff913f5b6542cda307c9cd6a95a214 bucket name: backups_sql_dswhseloadrepl_segments old bucket instance id: 80bdfc66-d1fd-418d-b87d-5c8518a0b707.340850308.51 new bucket instance id: 80bdfc66-d1fd-418d-b87d-5c8518a0b707.948621036.1 total entries: 1000 2000 3000 3228 2020-10-22 08:40:26.353 7fb197fc66c0 1 execute INFO: reshard of bucket "backups_sql_dswhseloadrepl_segments" from "d2ff913f5b6542cda307c9cd6a95a214/backups_sql_dswhseloadrepl_segments:80bdfc66-d1fd-418d-b87d-5c8518a0b707.340850308.51" to "d2ff913f5b6542cda307c9cd6a95a214/backups_sql_dswhseloadrepl_segments:80bdfc66-d1fd-418d-b87d-5c8518a0b707.948621036.1" completed successfully [root@cephmon-s03 ~]# radosgw-admin buckets reshard list [] [root@cephmon-s03 ~]# radosgw-admin buckets reshard status --bucket=d2ff913f5b6542cda307c9cd6a95a214/NAME_segments [ { "reshard_status": "not-resharding", "new_bucket_instance_id": "", "num_shards": -1 }, { "reshard_status": "not-resharding", "new_bucket_instance_id": "", "num_shards": -1 }, { "reshard_status": "not-resharding", "new_bucket_instance_id": "", "num_shards": -1 } ] [root@cephmon-s03 ~]# This kicked of an autoscale event. Would the reshard presumably start after the autoscaling is complete? peter Peter Eisch Senior Site Reliability Engineer T 1.612.445.5135 virginpulse.com Australia | Bosnia and Herzegovina | Brazil | Canada | Singapore | Switzerland | United Kingdom | USA Confidentiality Notice: The information contained in this e-mail, including any attachment(s), is intended solely for use by the designated recipient(s). Unauthorized use, dissemination, distribution, or reproduction of this message by anyone other than the intended recipient(s), or a person designated as responsible for delivering such messages to the intended recipient, is strictly prohibited and may be unlawful. This e-mail may contain proprietary, confidential or privileged information. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Virgin Pulse, Inc. If you have received this message in error, or are not the named recipient(s), please immediately notify the sender and delete this e-mail message. v2.66 On 10/21/20, 3:19 PM, "DHilsbos@xxxxxxxxxxxxxx" <DHilsbos@xxxxxxxxxxxxxx> wrote: This email originates outside Virgin Pulse. Peter; Look into bucket sharding. Thank you, Dominic L. Hilsbos, MBA Director – Information Technology Perform Air International Inc. DHilsbos@xxxxxxxxxxxxxx https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.performair.com%2F&data=04%7C01%7Cpeter.eisch%40virginpulse.com%7C14386968705f4571e9a008d8769e9a16%7Cb123a16e892b4cf6a55a6f8c7606a035%7C0%7C0%7C637389770850660951%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=AUPmwxIgzRhmwpg2MM6b%2FzpPyR84%2F92OFsW9UrKw%2Fes%3D&reserved=0 From: Peter Eisch [mailto:peter.eisch@xxxxxxxxxxxxxxx] Sent: Wednesday, October 21, 2020 12:39 PM To: ceph-users@xxxxxxx Subject: Large map object found Hi, My rgw.buckets.index has the cluster in WARN. I'm either not understanding the real issue or I'm making it worse, or both. OMAP_BYTES: 70461524 OMAP_KEYS: 250874 I thought I'd head this off by deleting rgw objects which would normally get deleted in the near future but this only seemed to make the values grow. Before I deleted lots of objects the values were: OMAP_BYTES: 65450132 OMAP_KEYS: 209843 I read the default is 200k but I haven't read the proper way to manage this situation. What reading should I dive into? I could probably craft up a command to increase the value to clear the warning but I'm guessing this might not be great long-term. Other errata which might matter: Size: 3 Pool: nvme CLASS SIZE AVAIL USED RAW USED %RAW USED nvme 256 TiB 165 TiB 91 TiB 91 TiB 35.53 Errata: the complete statements: PG OBJECTS DEGRADED MISPLACED UNFOUND BYTES OMAP_BYTES* OMAP_KEYS* LOG STATE SINCE VERSION REPORTED UP ACTING SCRUB_STAMP DEEP_SCRUB_STAMP 43.d 2 0 0 0 0 70461524 250874 3070 active+clean 36m 185904'456870 185904:1357091 [99,90,48]p99 [99,90,48]p99 2020-10-21 13:53:42.102363 2020-10-21 13:53:42.102363 Thanks! peter Peter Eisch Senior Site Reliability Engineer T 1.612.445.5135 virginpulse.com Australia | Bosnia and Herzegovina | Brazil | Canada | Singapore | Switzerland | United Kingdom | USA Confidentiality Notice: The information contained in this e-mail, including any attachment(s), is intended solely for use by the designated recipient(s). Unauthorized use, dissemination, distribution, or reproduction of this message by anyone other than the intended recipient(s), or a person designated as responsible for delivering such messages to the intended recipient, is strictly prohibited and may be unlawful. This e-mail may contain proprietary, confidential or privileged information. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Virgin Pulse, Inc. If you have received this message in error, or are not the named recipient(s), please immediately notify the sender and delete this e-mail message. v2.66 _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |