Will do Matt On Tue, Sep 8, 2020 at 5:36 PM Matt Benjamin <mbenjami@xxxxxxxxxx> wrote: > > thanks, Shubjero > > Would you consider creating a ceph tracker issue for this? > > regards, > > Matt > > On Tue, Sep 8, 2020 at 4:13 PM shubjero <shubjero@xxxxxxxxx> wrote: > > > > I had been looking into this issue all day and during testing found > > that a specific configuration option we had been setting for years was > > the culprit. Not setting this value and letting it fall back to the > > default seems to have fixed our issue with multipart uploads. > > > > If you are curious, the configuration option is rgw_obj_stripe_size > > which was being set to 67108864 bytes (64MiB). The default is 4194304 > > bytes (4MiB). This is a documented option > > (https://docs.ceph.com/docs/nautilus/radosgw/config-ref/) and from my > > testing it seems like using anything but the default (only tried > > larger values) breaks multipart uploads. > > > > On Tue, Sep 8, 2020 at 12:12 PM shubjero <shubjero@xxxxxxxxx> wrote: > > > > > > Hey all, > > > > > > I'm creating a new post for this issue as we've narrowed the problem > > > down to a partsize limitation on multipart upload. We have discovered > > > that in our production Nautilus (14.2.11) cluster and our lab Nautilus > > > (14.2.10) cluster that multipart uploads with a configured part size > > > of greater than 16777216 bytes (16MiB) will return a status 500 / > > > internal server error from radosgw. > > > > > > So far I have increased the following rgw settings/values that looked > > > suspect, without any success/improvement with partsizes. > > > Such as: > > > "rgw_get_obj_window_size": "16777216", > > > "rgw_put_obj_min_window_size": "16777216", > > > > > > I am trying to determine if this is because of a conservative default > > > setting somewhere that I don't know about or if this is perhaps a bug? > > > > > > I would appreciate it if someone on Nautilus with rgw could also test > > > / provide feedback. It's very easy to reproduce and configuring your > > > partsize with aws2cli requires you to put the following in your aws > > > 'config' > > > s3 = > > > multipart_chunksize = 32MB > > > > > > rgw server logs during a failed multipart upload (32MB chunk/partsize): > > > 2020-09-08 15:59:36.054 7f2d32fa6700 1 ====== starting new request > > > req=0x55953dc36930 ===== > > > 2020-09-08 15:59:36.082 7f2d32fa6700 -1 res_query() failed > > > 2020-09-08 15:59:36.138 7f2d32fa6700 1 ====== req done > > > req=0x55953dc36930 op status=0 http_status=200 latency=0.0839988s > > > ====== > > > 2020-09-08 16:00:07.285 7f2d3dfbc700 1 ====== starting new request > > > req=0x55953dc36930 ===== > > > 2020-09-08 16:00:07.285 7f2d3dfbc700 -1 res_query() failed > > > 2020-09-08 16:00:07.353 7f2d00741700 1 ====== starting new request > > > req=0x55954dd5e930 ===== > > > 2020-09-08 16:00:07.357 7f2d00741700 -1 res_query() failed > > > 2020-09-08 16:00:07.413 7f2cc56cb700 1 ====== starting new request > > > req=0x55953dc02930 ===== > > > 2020-09-08 16:00:07.417 7f2cc56cb700 -1 res_query() failed > > > 2020-09-08 16:00:07.473 7f2cb26a5700 1 ====== starting new request > > > req=0x5595426f6930 ===== > > > 2020-09-08 16:00:07.473 7f2cb26a5700 -1 res_query() failed > > > 2020-09-08 16:00:09.465 7f2d3dfbc700 0 WARNING: set_req_state_err > > > err_no=35 resorting to 500 > > > 2020-09-08 16:00:09.465 7f2d3dfbc700 1 ====== req done > > > req=0x55953dc36930 op status=-35 http_status=500 latency=2.17997s > > > ====== > > > 2020-09-08 16:00:09.549 7f2d00741700 0 WARNING: set_req_state_err > > > err_no=35 resorting to 500 > > > 2020-09-08 16:00:09.549 7f2d00741700 1 ====== req done > > > req=0x55954dd5e930 op status=-35 http_status=500 latency=2.19597s > > > ====== > > > 2020-09-08 16:00:09.605 7f2cc56cb700 0 WARNING: set_req_state_err > > > err_no=35 resorting to 500 > > > 2020-09-08 16:00:09.609 7f2cc56cb700 1 ====== req done > > > req=0x55953dc02930 op status=-35 http_status=500 latency=2.19597s > > > ====== > > > 2020-09-08 16:00:09.641 7f2cb26a5700 0 WARNING: set_req_state_err > > > err_no=35 resorting to 500 > > > 2020-09-08 16:00:09.641 7f2cb26a5700 1 ====== req done > > > req=0x5595426f6930 op status=-35 http_status=500 latency=2.16797s > > > ====== > > > > > > awscli client side output during a failed multipart upload: > > > root@jump:~# aws --no-verify-ssl --endpoint-url > > > http://lab-object.cancercollaboratory.org:7480 s3 cp 4GBfile > > > s3://troubleshooting > > > upload failed: ./4GBfile to s3://troubleshooting/4GBfile An error > > > occurred (UnknownError) when calling the UploadPart operation (reached > > > max retries: 2): Unknown > > > > > > Thanks, > > > > > > Jared Baker > > > Cloud Architect for the Cancer Genome Collaboratory > > > Ontario Institute for Cancer Research > > _______________________________________________ > > ceph-users mailing list -- ceph-users@xxxxxxx > > To unsubscribe send an email to ceph-users-leave@xxxxxxx > > > > > -- > > Matt Benjamin > Red Hat, Inc. > 315 West Huron Street, Suite 140A > Ann Arbor, Michigan 48103 > > http://www.redhat.com/en/technologies/storage > > tel. 734-821-5101 > fax. 734-769-8938 > cel. 734-216-5309 > _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |