Re: Recover pgs from failed osds

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Can you try the opposite and turn up the memory_target and only try to start a single OSD?


Zitat von Vahideh Alinouri <vahideh.alinouri@xxxxxxxxx>:

osd_memory_target is changed to 3G, starting failed osd causes ceph-osd
nodes crash! and failed osd is still "down"

On Fri, Aug 28, 2020 at 1:13 PM Vahideh Alinouri <vahideh.alinouri@xxxxxxxxx>
wrote:

Yes, each osd node has 7 osds with 4 GB memory_target.


On Fri, Aug 28, 2020, 12:48 PM Eugen Block <eblock@xxxxxx> wrote:

Just to confirm, each OSD node has 7 OSDs with 4 GB memory_target?
That leaves only 4 GB RAM for the rest, and in case of heavy load the
OSDs use even more. I would suggest to reduce the memory_target to 3
GB and see if they start successfully.


Zitat von Vahideh Alinouri <vahideh.alinouri@xxxxxxxxx>:

> osd_memory_target is 4294967296.
> Cluster setup:
> 3 mon, 3 mgr, 21 osds on 3 ceph-osd nodes in lvm scenario.  ceph-osd
nodes
> resources are 32G RAM - 4 core CPU - osd disk 4TB - 9 osds have
> block.wal on SSDs.  Public network is 1G and cluster network is 10G.
> Cluster installed and upgraded using ceph-ansible.
>
> On Thu, Aug 27, 2020 at 7:01 PM Eugen Block <eblock@xxxxxx> wrote:
>
>> What is the memory_target for your OSDs? Can you share more details
>> about your setup? You write about high memory, are the OSD nodes
>> affected by OOM killer? You could try to reduce the osd_memory_target
>> and see if that helps bring the OSDs back up. Splitting the PGs is a
>> very heavy operation.
>>
>>
>> Zitat von Vahideh Alinouri <vahideh.alinouri@xxxxxxxxx>:
>>
>> > Ceph cluster is updated from nautilus to octopus. On ceph-osd nodes
we
>> have
>> > high I/O wait.
>> >
>> > After increasing one of pool’s pg_num from 64 to 128 according to
warning
>> > message (more objects per pg), this lead to high cpu load and ram
usage
>> on
>> > ceph-osd nodes and finally crashed the whole cluster. Three osds,
one on
>> > each host, stuck at down state (osd.34 osd.35 osd.40).
>> >
>> > Starting the down osd service causes high ram usage and cpu load and
>> > ceph-osd node to crash until the osd service fails.
>> >
>> > The active mgr service on each mon host will crash after consuming
almost
>> > all available ram on the physical hosts.
>> >
>> > I need to recover pgs and solving corruption. How can i recover
unknown
>> and
>> > down pgs? Is there any way to starting up failed osd?
>> >
>> >
>> > Below steps are done:
>> >
>> > 1- osd nodes’ kernel was upgraded to 5.4.2 before ceph cluster
upgrading.
>> > Reverting to previous kernel 4.2.1 is tested for iowate decreasing,
but
>> it
>> > had no effect.
>> >
>> > 2- Recovering 11 pgs on failed osds by export them using
>> > ceph-objectstore-tools utility and import them on other osds. The
result
>> > followed: 9 pgs are “down” and 2 pgs are “unknown”.
>> >
>> > 2-1) 9 pgs export and import successfully but status is “down”
because of
>> > "peering_blocked_by" 3 failed osds. I cannot lost osds because of
>> > preventing unknown pgs from getting lost. pgs size in K and M.
>> >
>> > "peering_blocked_by": [
>> >
>> > {
>> >
>> > "osd": 34,
>> >
>> > "current_lost_at": 0,
>> >
>> > "comment": "starting or marking this osd lost may let us proceed"
>> >
>> > },
>> >
>> > {
>> >
>> > "osd": 35,
>> >
>> > "current_lost_at": 0,
>> >
>> > "comment": "starting or marking this osd lost may let us proceed"
>> >
>> > },
>> >
>> > {
>> >
>> > "osd": 40,
>> >
>> > "current_lost_at": 0,
>> >
>> > "comment": "starting or marking this osd lost may let us proceed"
>> >
>> > }
>> >
>> > ]
>> >
>> >
>> > 2-2) 1 pg (2.39) export and import successfully, but after starting
osd
>> > service (pg import to it), ceph-osd node RAM and CPU consumption
increase
>> > and cause ceph-osd node to crash until the osd service fails. Other
osds
>> > become "down" on ceph-osd node. pg status is “unknown”. I cannot use
>> > "force-create-pg" because of data lost. pg 2.39 size is 19G.
>> >
>> > # ceph pg map 2.39
>> >
>> > osdmap e40347 pg 2.39 (2.39) -> up [32,37] acting [32,37]
>> >
>> > # ceph pg 2.39 query
>> >
>> > Error ENOENT: i don't have pgid 2.39
>> >
>> >
>> > *pg 2.39 info on failed osd:
>> >
>> > # ceph-objectstore-tool --data-path /var/lib/ceph/osd/*ceph-34* --op
info
>> > --pgid 2.39
>> >
>> > {
>> >
>> > "pgid": "2.39",
>> >
>> > "last_update": "35344'6456084",
>> >
>> > "last_complete": "35344'6456084",
>> >
>> > "log_tail": "35344'6453182",
>> >
>> > "last_user_version": 10595821,
>> >
>> > "last_backfill": "MAX",
>> >
>> > "purged_snaps": [],
>> >
>> > "history": {
>> >
>> > "epoch_created": 146,
>> >
>> > "epoch_pool_created": 79,
>> >
>> > "last_epoch_started": 25208,
>> >
>> > "last_interval_started": 25207,
>> >
>> > "last_epoch_clean": 25208,
>> >
>> > "last_interval_clean": 25207,
>> >
>> > "last_epoch_split": 370,
>> >
>> > "last_epoch_marked_full": 0,
>> >
>> > "same_up_since": 8347,
>> >
>> > "same_interval_since": 25207,
>> >
>> > "same_primary_since": 8321,
>> >
>> > "last_scrub": "35328'6440139",
>> >
>> > "last_scrub_stamp": "2020-08-19T12:00:59.377593+0430",
>> >
>> > "last_deep_scrub": "35261'6031075",
>> >
>> > "last_deep_scrub_stamp": "2020-08-17T01:59:26.606037+0430",
>> >
>> > "last_clean_scrub_stamp": "2020-08-19T12:00:59.377593+0430",
>> >
>> > "prior_readable_until_ub": 0
>> >
>> > },
>> >
>> > "stats": {
>> >
>> > "version": "35344'6456082",
>> >
>> > "reported_seq": "11733156",
>> >
>> > "reported_epoch": "35344",
>> >
>> > "state": "active+clean",
>> >
>> > "last_fresh": "2020-08-19T14:16:18.587435+0430",
>> >
>> > "last_change": "2020-08-19T12:00:59.377747+0430",
>> >
>> > "last_active": "2020-08-19T14:16:18.587435+0430",
>> >
>> > "last_peered": "2020-08-19T14:16:18.587435+0430",
>> >
>> > "last_clean": "2020-08-19T14:16:18.587435+0430",
>> >
>> > "last_became_active": "2020-08-06T00:23:51.016769+0430",
>> >
>> > "last_became_peered": "2020-08-06T00:23:51.016769+0430",
>> >
>> > "last_unstale": "2020-08-19T14:16:18.587435+0430",
>> >
>> > "last_undegraded": "2020-08-19T14:16:18.587435+0430",
>> >
>> > "last_fullsized": "2020-08-19T14:16:18.587435+0430",
>> >
>> > "mapping_epoch": 8347,
>> >
>> > "log_start": "35344'6453182",
>> >
>> > "ondisk_log_start": "35344'6453182",
>> >
>> > "created": 146,
>> >
>> > "last_epoch_clean": 25208,
>> >
>> > "parent": "0.0",
>> >
>> > "parent_split_bits": 7,
>> >
>> > "last_scrub": "35328'6440139",
>> >
>> > "last_scrub_stamp": "2020-08-19T12:00:59.377593+0430",
>> >
>> > "last_deep_scrub": "35261'6031075",
>> >
>> > "last_deep_scrub_stamp": "2020-08-17T01:59:26.606037+0430",
>> >
>> > "last_clean_scrub_stamp": "2020-08-19T12:00:59.377593+0430",
>> >
>> > "log_size": 2900,
>> >
>> > "ondisk_log_size": 2900,
>> >
>> > "stats_invalid": false,
>> >
>> > "dirty_stats_invalid": false,
>> >
>> > "omap_stats_invalid": false,
>> >
>> > "hitset_stats_invalid": false,
>> >
>> > "hitset_bytes_stats_invalid": false,
>> >
>> > "pin_stats_invalid": false,
>> >
>> > "manifest_stats_invalid": false,
>> >
>> > "snaptrimq_len": 0,
>> >
>> > "stat_sum": {
>> >
>> > "num_bytes": 19749578960,
>> >
>> > "num_objects": 2442,
>> >
>> > "num_object_clones": 20,
>> >
>> > "num_object_copies": 7326,
>> >
>> > "num_objects_missing_on_primary": 0,
>> >
>> > "num_objects_missing": 0,
>> >
>> > "num_objects_degraded": 0,
>> >
>> > "num_objects_misplaced": 0,
>> >
>> > "num_objects_unfound": 0,
>> >
>> > "num_objects_dirty": 2442,
>> >
>> > "num_whiteouts": 0,
>> >
>> > "num_read": 16120686,
>> >
>> > "num_read_kb": 82264126,
>> >
>> > "num_write": 19731882,
>> >
>> > "num_write_kb": 379030181,
>> >
>> > "num_scrub_errors": 0,
>> >
>> > "num_shallow_scrub_errors": 0,
>> >
>> > "num_deep_scrub_errors": 0,
>> >
>> > "num_objects_recovered": 2861,
>> >
>> > "num_bytes_recovered": 21673259070,
>> >
>> > "num_keys_recovered": 32,
>> >
>> > "num_objects_omap": 2,
>> >
>> > "num_objects_hit_set_archive": 0,
>> >
>> > "num_bytes_hit_set_archive": 0,
>> >
>> > "num_flush": 0,
>> >
>> > "num_flush_kb": 0,
>> >
>> > "num_evict": 0,
>> >
>> > "num_evict_kb": 0,
>> >
>> > "num_promote": 0,
>> >
>> > "num_flush_mode_high": 0,
>> >
>> > "num_flush_mode_low": 0,
>> >
>> > "num_evict_mode_some": 0,
>> >
>> > "num_evict_mode_full": 0,
>> >
>> > "num_objects_pinned": 0,
>> >
>> > "num_legacy_snapsets": 0,
>> >
>> > "num_large_omap_objects": 0,
>> >
>> > "num_objects_manifest": 0,
>> >
>> > "num_omap_bytes": 152,
>> >
>> > "num_omap_keys": 16,
>> >
>> > "num_objects_repaired": 0
>> >
>> > },
>> >
>> > "up": [
>> >
>> > 40,
>> >
>> > 35,
>> >
>> > 34
>> >
>> > ],
>> >
>> > "acting": [
>> >
>> > 40,
>> >
>> > 35,
>> >
>> > 34
>> >
>> > ],
>> >
>> > "avail_no_missing": [],
>> >
>> > "object_location_counts": [],
>> >
>> > "blocked_by": [],
>> >
>> > "up_primary": 40,
>> >
>> > "acting_primary": 40,
>> >
>> > "purged_snaps": []
>> >
>> > },
>> >
>> > "empty": 0,
>> >
>> > "dne": 0,
>> >
>> > "incomplete": 0,
>> >
>> > "last_epoch_started": 25208,
>> >
>> > "hit_set_history": {
>> >
>> > "current_last_update": "0'0",
>> >
>> > "history": []
>> >
>> > }
>> >
>> > }
>> >
>> >
>> > *pg 2.39 info on osd which import to it:
>> >
>> > # ceph-objectstore-tool --data-path /var/lib/ceph/osd/*ceph-37* --op
info
>> > --pgid 2.39
>> >
>> > PG '2.39' not found
>> >
>> >
>> > 2-3) 1 pg (2.79) is lost! This pg is not found on any of three failed
>> osds
>> > (osd.34 osd.35 osd.40)! status is “unknown”. pg 2.79 export is
failed: "
>> >  PG '2.79' not found"
>> >
>> >
>> >
>> > # ceph pg map 2.79
>> >
>> > Error ENOENT: i don't have pgid 2.79
>> >
>> > # ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-34 --op
info
>> > --pgid 2.79
>> >
>> > PG '2.79' not found
>> >
>> >
>> > 3- Using https://gitlab.lbader.de/kryptur/ceph-recovery/tree/master
but
>> it
>> > does not work for recent ceph versions and tested on “hammer”
release.
>> >
>> > 4- Using
https://ceph.io/planet/recovering-from-a-complete-node-failure/
>> > but in lvm scenario I could not mount failed osd lv to new
>> > /var/lib/ceph/osd/ceph-x* .*Could not prepare and activate new osd to
>> > failed osd disk.
>> >
>> > 5- Setting pool min_size=1 that down pgs belong to it, restart osds
that
>> > pgs import to them but no changes.
>> >
>> > 6- Seting pool min_size=1 that pg 2.39 belong to it, restart osds
that pg
>> > import to them but no changes.
>> >
>> > 7- Repairing failed osds using ceph-objectstore-tools, making “in”
and
>> > starting them but no changes.
>> >
>> > # ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-x --op
repair
>> >
>> >
>> > 8- Repairing 2 unknown pgs, but no changes.
>> >
>> > # ceph pg repaire 2.39
>> >
>> > # ceph pg repair 2.79
>> >
>> > 9- Forcing recovery 2 unknown pgs, but no changes.
>> >
>> > # ceph pg force-recovery 2.39
>> >
>> > # ceph pg force-recovery 2.79
>> >
>> > 10- Check PID count in ceph-osd nodes because of osd services failed
to
>> > start.
>> >
>> > kernel.pid.max = 4194304
>> >
>> > 11- Raising osd_op_thread_suicide_timeout=900, but no change.
>> > _______________________________________________
>> > ceph-users mailing list -- ceph-users@xxxxxxx
>> > To unsubscribe send an email to ceph-users-leave@xxxxxxx
>>
>>
>> _______________________________________________
>> ceph-users mailing list -- ceph-users@xxxxxxx
>> To unsubscribe send an email to ceph-users-leave@xxxxxxx
>>






_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx




[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux