On Wed, Aug 26, 2020 at 9:15 AM Willi Schiegel <willi.schiegel@xxxxxxxxxxxxxx> wrote: > > Hello All, > > I have a Nautilus (14.2.11) cluster which is running fine on CentOS 7 > servers. 4 OSD nodes, 3 MON/MGR hosts. Now I wanted to enable iSCSI > gateway functionality to be used by some Solaris and FreeBSD clients. I > followed the instructions under > > https://docs.ceph.com/docs/nautilus/rbd/iscsi-target-cli-manual-install > > and > > https://docs.ceph.com/docs/nautilus/rbd/iscsi-target-cli/ > > I setup two iSCSI targets and they both show up with gwcli on both gateways: > > [root@osd1 ~]# gwcli ls > ... > o- gateways ..................... [Up: 2/2, Portals: 2] > | o- osd1.mydomain.pri ......... [172.29.1.171 (UP)] > | o- osd2.mydomain.pri ......... [172.29.1.172 (UP)] > ... > > tcmu-runner, rbd-target-gw and rbd-target-api are active (running) on > both gateways, there is no firewall and SELinux is disabled but on the > dashboard the state of the gateways is "down". and ceph-mgr.mon2.log shows > > mgr[dashboard] iscsi REST API failed GET req status: 403 > > Any hints? Thank you. Have you ensured that your MGR ip addresses are in "trusted_ip_list" on the GWs [1]? > Best > Willi > _______________________________________________ > ceph-users mailing list -- ceph-users@xxxxxxx > To unsubscribe send an email to ceph-users-leave@xxxxxxx > [1] https://github.com/ceph/ceph-iscsi/blob/master/ceph_iscsi_config/gateway_setting.py#L179 -- Jason _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |