Re: mgr log shows a lot of ms_handle_reset messages

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It seems that this log is produced by MDSDaemon, but we don’t have MDS installed.

> 2020年6月28日 下午9:33,Zhenshi Zhou <deaderzzs@xxxxxxxxx <mailto:deaderzzs@xxxxxxxxx>> 写道:
> 
> From my point of view, I don't think it's an error. But the messages are much more frequent.
> 
> XuYun <yunxu@xxxxxx <mailto:yunxu@xxxxxx>> 于2020年6月28日周日 下午6:55写道:
> Thank you for your reply. After increasing log level, more log lines were produced:
> 
> 2020-06-28 18:52:33.310 7fcdc56de700 10 mgr tick tick
> 2020-06-28 18:52:33.310 7fcdc56de700  4 mgr send_beacon standby
> 2020-06-28 18:52:33.311 7fcdc56de700 10 mgr send_beacon sending beacon as gid 12644655
> 2020-06-28 18:52:33.687 7fcdc96e6700  0 client.0 ms_handle_reset on v2:111.111.121.3:6807/7 <http://111.111.121.3:6807/7>
> 2020-06-28 18:52:33.690 7fcdc96e6700  4 mgr ms_dispatch standby mgrconfigure(period=5, threshold=5) v3
> 2020-06-28 18:52:34.687 7fcdc96e6700  0 client.0 ms_handle_reset on v2:111.111.121.3:6807/7 <http://111.111.121.3:6807/7>
> 2020-06-28 18:52:34.690 7fcdc96e6700  4 mgr ms_dispatch standby mgrconfigure(period=5, threshold=5) v3
> 2020-06-28 18:52:35.311 7fcdc56de700 10 mgr tick tick
> 2020-06-28 18:52:35.311 7fcdc56de700  4 mgr send_beacon standby
> 2020-06-28 18:52:35.311 7fcdc56de700 10 mgr send_beacon sending beacon as gid 12644655
> 2020-06-28 18:52:35.687 7fcdc96e6700  0 client.0 ms_handle_reset on v2:111.111.121.3:6807/7 <http://111.111.121.3:6807/7>
> 2020-06-28 18:52:35.690 7fcdc96e6700  4 mgr ms_dispatch standby mgrconfigure(period=5, threshold=5) v3
> 
> 
>> 2020年6月28日 下午6:02,Zhenshi Zhou <deaderzzs@xxxxxxxxx <mailto:deaderzzs@xxxxxxxxx>> 写道:
>> 
>> I cannot find the same messages in my mgr.log. I think you can increase the log level and see if there is an error or not.
>> 
>> XuYun <yunxu@xxxxxx <mailto:yunxu@xxxxxx>> 于2020年6月28日周日 下午4:39写道:
>> Hi,
>> 
>> We are running Ceph nautilus (14.2.10 now), every mgr reports a ‘ms_handle_reset’ message every second. Would it be a normal behavior?
>> 
>> 2020-06-28 16:35:43.580 7fcdc96e6700  0 client.0 ms_handle_reset on v2:111.111.121.3:6807/7
>> 2020-06-28 <http://111.111.121.3:6807/72020-06-28> 16:35:44.580 7fcdc96e6700  0 client.0 ms_handle_reset on v2:111.111.121.3:6807/7
>> 2020-06-28 <http://111.111.121.3:6807/72020-06-28> 16:35:45.580 7fcdc96e6700  0 client.0 ms_handle_reset on v2:111.111.121.3:6807/7
>> 2020-06-28 <http://111.111.121.3:6807/72020-06-28> 16:35:46.581 7fcdc96e6700  0 client.0 ms_handle_reset on v2:111.111.121.3:6807/7
>> 2020-06-28 <http://111.111.121.3:6807/72020-06-28> 16:35:47.580 7fcdc96e6700  0 client.0 ms_handle_reset on v2:111.111.121.3:6807/7 <http://111.111.121.3:6807/7>
>> 
>> Br,
>> Xu Yun
>> _______________________________________________
>> ceph-users mailing list -- ceph-users@xxxxxxx <mailto:ceph-users@xxxxxxx>
>> To unsubscribe send an email to ceph-users-leave@xxxxxxx <mailto:ceph-users-leave@xxxxxxx>
> 

_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx




[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux