Sorry for the typo: must be journalctl -f instead of syslogctl -f.-gw
On Tue, 2020-04-28 at 19:12 +0000, Gert Wieberdink wrote:
> Hello Simon,ceph-mgr and dashboard installation should
> bestraightforward.These are tough ones (internal server error 500).
> Did you create a selfsigned cert for dashboard?Did you check
> firewalld (port 8443) and/orSELinux? Does syslogctl -f show
> anything?rgds,-gwOn Tue, 2020-04-28 at 12:17 +0000, Simon Sutter
> wrote:
> > <!--p {margin-top:0; margin-bottom:0}-->
> >
> >
> > Hello,
> >
> >
> > Yes I upgraded the system to Centos8 and now I can install
> > thedashboard module.But the problem now is, I cannot log in to the
> > dashboard.I deleted every cached file on my end and reinstalled the
> > mgr anddashboard several times.If I try to log in with a wrong
> > password, it tells me that it'swrong, but if i use the right
> > password, it just gives me a "500Internal Server Error".
> > I enabled the debug mode for the mgr: ceph config set
> > mgrmgr/dashboard/log_level debug
> > But in the /var/log/ceph/ceph-mgr.node1.log it just tells me
> > thisgeneric message (ips replaced with 0.0.0.0):
> >
> >
> >
> >
> > 2020-04-28T14:11:15.191+0200 7f0baba8c700 0 [dashboard
> > DEBUGrequest] [::ffff:0.0.0.0:61383] [POST] [None] /api/auth2020-
> > 04-28T14:11:15.282+0200 7f0bcf164700 0 log_channel(cluster)
> > log[DBG] : pgmap v316: 273 pgs: 273 active+clean; 2.4 TiB data, 7.1
> > TiBused, 18 TiB / 25 TiB avail2020-04-28T14:11:15.453+0200
> > 7f0baba8c700 0 [dashboard DEBUGcontrollers.auth] Login
> > successful2020-04-28T14:11:15.453+0200 7f0baba8c700 0 [dashboard
> > ERRORrequest] [::ffff:0.0.0.0:61383] [POST] [500] [0.264s]
> > [513.0B][100ecd9a-5d09-419f-8b9f-31bc3d4042b4] /api/auth2020-04-
> > 28T14:11:15.453+0200 7f0baba8c700 0 [dashboard ERRORrequest]
> > [b'{"status": "500 Internal Server Error", "detail": "Theserver
> > encountered an unexpected condition which prevented it
> > fromfulfilling the request.", "request_id": "100ecd9a-5d09-419f-
> > 8b9f-
> > 31bc3d4042b4"}
> >
> >
> >
> > ']2020-04-
> > 28T14:11:15.454+0200 7f0baba8c700 0 [dashboard INFO
> > request][::ffff:0.0.0.0:61383] [POST] [500] [0.264s] [513.0B]
> > [100ecd9a-5d09-419f-8b9f-31bc3d4042b4] /api/auth
> >
> >
> > How can I find out, where the problem is?
> >
> >
> > Thanks in advance,Simon
> >
> > Von: gert.wieberdink@xxxxxxxx <gert.wieberdink@xxxxxxxx>
> > Gesendet: Donnerstag, 23. April 2020 20:34:58
> > An: ceph-users@xxxxxxx
> >
> > Betreff: Re: Upgrading to Octopus
> >
> >
> > Hello Simon,
> > I think that Khodayar is right. I managed to install a new
> > Cephcluster on CentOS 8.1. Therefore you will need the ceph-
> > el8.repo forthe time being. For some reason, "they" left the py3
> > packages youmentioned out of EPEL (as with leveldb, but this
> > package appeared luckily last week in EPEL).
> > Please find below the ceph-el8.repo file, which you have to create
> > in/etc/yum.repos.d/
> >
> >
> > [copr:copr.fedorainfracloud.org:ktdreyer:ceph-el8]
> > name=Copr repo for ceph-el8 owned by ktdreyer
> > baseurl=
> > https://download.copr.fedorainfracloud.org/results/ktdreyer/ceph-el8/epel-8-$basearch/
> >
> > type=rpm-md
> > skip_if_unavailable=True
> > gpgcheck=1
> > gpgkey=
> > https://download.copr.fedorainfracloud.org/results/ktdreyer/ceph-el8/pubkey.gpg
> >
> > repo_gpgcheck=0
> > enabled=1
> > enabled_metadata=1
> >
> >
> > This repository - and CentOS 8.x - should have been sufficient
> > tobring up a fresh Ceph cluster.
> > Please let me know if you still have problems in configuring
> > yourCeph cluster.
> > rgds,
> > -gw
> > _______________________________________________
> > ceph-users mailing list -- ceph-users@xxxxxxx
> >
> > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> >
> >
> >
> >
> >
>
> _______________________________________________ceph-users mailing
> list -- ceph-users@xxxxxxx
> To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
