Hi, What do you have for full_ratio? Here are the defaults: # ceph osd dump | grep full full_ratio 0.95 backfillfull_ratio 0.9 nearfull_ratio 0.85 Maybe you can unblock by setting the full_ratio to 0.96? -- Dan On Thu, Apr 9, 2020 at 3:00 PM Robert Sander <r.sander@xxxxxxxxxxxxxxxxxxx> wrote: > > Hi, > > is it possible to remove an S3 bucket and its S3 objects with the rados > CLI tool (removing the low level Ceph objects)? > > The situation is a nearfull cluster with OSDs filled more than 80% and > the default.rgw.buckets.data being reported as 100% full. Read > operations are still possible but no write. s3cmd rb … says operation > halted and radosgw-admin bucket rm also waits for a healthy cluster. > > The other option would be to tune the nearfull_ratio and full_ratio > temporarily to allow the cluster to use more space, correct? > > Regards > -- > Robert Sander > Heinlein Support GmbH > Schwedter Str. 8/9b, 10119 Berlin > > http://www.heinlein-support.de > > Tel: 030 / 405051-43 > Fax: 030 / 405051-19 > > Zwangsangaben lt. §35a GmbHG: > HRB 93818 B / Amtsgericht Berlin-Charlottenburg, > Geschäftsführer: Peer Heinlein -- Sitz: Berlin > > _______________________________________________ > ceph-users mailing list -- ceph-users@xxxxxxx > To unsubscribe send an email to ceph-users-leave@xxxxxxx _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |