On 2/5/20 2:21 PM, Vladimir Prokofev wrote: > Cluster upgraded from 12.2.12 to 14.2.5. All went smooth, except BlueFS > spillover warning. > We create OSDs with ceph-deploy, command goes like this: > ceph-deploy osd create --bluestore --data /dev/sdf --block-db /dev/sdb5 > --block-wal /dev/sdb6 ceph-osd3 > where block-db and block-wal are SSD partitions. > Default ceph-deploy settings created partitions ~1GB which is, of course, > too small. So we redeployed OSDs using manually partitioned SSD for > block-db/block-wal with sizes of 20G/5G respectively. > But now we still get BlueFS spillover warning for redeployed OSDs: > osd.10 spilled over 2.4 GiB metadata from 'db' device (2.8 GiB used of > 19 GiB) to slow device > osd.19 spilled over 3.7 GiB metadata from 'db' device (2.7 GiB used of > 19 GiB) to slow device > osd.20 spilled over 4.2 GiB metadata from 'db' device (2.6 GiB used of > 19 GiB) to slow device > osd size is 1.8 TiB. > > These OSDs are used primarily for RBD as a backup drives, so a lot of > snapshots held there. They also have RGW pool assigned to them, but it has > no data. > I know of sizing recommendations[1] for block-db/block-wal, but I assumed > since it's primarily RBD 1%(~20G) should be enough. > Also, compaction stats doesn't make sense to me[2]. It states that sum of > DB is only 5.08GB, that should be placed on block-db without a problem? > Am I understanding all this wrong? Should block-db size be greater in my > case? Have you tried a compact? I saw this today as well. I tried a compact and that reduced the DB <28GB causing it fit on the DB again. The DB is 64GB, but at ~29GB it spilled over to the slow device. Wido > > [1] > https://docs.ceph.com/docs/master/rados/configuration/bluestore-config-ref/#sizing > [2] osd.10 logs as an example > https://pastebin.com/hC6w6jSn > _______________________________________________ > ceph-users mailing list -- ceph-users@xxxxxxx > To unsubscribe send an email to ceph-users-leave@xxxxxxx > _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx