On Thu, Dec 12, 2019 at 9:06 AM Dan van der Ster <dan@xxxxxxxxxxxxxx> wrote: > > Thanks for this! > > We're having trouble installing the ceph-debuginfo rpm, which shows a > negative file size (apparently because it now exceeds 2GB): > https://pastebin.com/5bnNCGHh > > Does this change need to be applied to the release builds too? > https://tracker.ceph.com/issues/39387 Good catch! I just checked and yes, we need to use the --no-database flag > > -- Dan > > On Tue, Dec 10, 2019 at 10:45 AM Abhishek Lekshmanan <abhishek@xxxxxxxx> wrote: > > > > This is the fifth release of the Ceph Nautilus release series. Among the many > > notable changes, this release fixes a critical BlueStore bug that was introduced > > in 14.2.3. All Nautilus users are advised to upgrade to this release. > > > > For the complete changelog entry, please visit the release blog at > > https://ceph.io/releases/v14-2-5-nautilus-released/ > > > > Notable Changes > > --------------- > > > > Critical fix: > > > > * This release fixes a `critical BlueStore bug <https://tracker.ceph.com/issues/42223>`_ > > introduced in 14.2.3 (and also present in 14.2.4) that can lead to data > > corruption when a separate "WAL" device is used. > > > > New health warnings: > > > > * Ceph will now issue health warnings if daemons have recently crashed. Ceph > > has been collecting crash reports since the initial Nautilus release, but the > > health alerts are new. To view new crashes (or all crashes, if you've just > > upgraded):: > > > > ceph crash ls-new > > > > To acknowledge a particular crash (or all crashes) and silence the health warning:: > > > > ceph crash archive <crash-id> > > ceph crash archive-all > > > > * Ceph will now issue a health warning if a RADOS pool has a ``pg_num`` > > value that is not a power of two. This can be fixed by adjusting > > the pool to a nearby power of two:: > > > > ceph osd pool set <pool-name> pg_num <new-pg-num> > > > > Alternatively, the warning can be silenced with:: > > > > ceph config set global mon_warn_on_pool_pg_num_not_power_of_two false > > > > * Ceph will issue a health warning if a RADOS pool's ``size`` is set to 1 > > or, in other words, if the pool is configured with no redundancy. Ceph will > > stop issuing the warning if the pool size is set to the minimum > > recommended value:: > > > > ceph osd pool set <pool-name> size <num-replicas> > > > > The warning can be silenced with:: > > > > ceph config set global mon_warn_on_pool_no_redundancy false > > > > * A health warning is now generated if the average osd heartbeat ping > > time exceeds a configurable threshold for any of the intervals > > computed. The OSD computes 1 minute, 5 minute and 15 minute > > intervals with average, minimum and maximum values. New configuration > > option `mon_warn_on_slow_ping_ratio` specifies a percentage of > > `osd_heartbeat_grace` to determine the threshold. A value of zero > > disables the warning. New configuration option `mon_warn_on_slow_ping_time` > > specified in milliseconds over-rides the computed value, causes a warning > > when OSD heartbeat pings take longer than the specified amount. > > A new admin command, `ceph daemon mgr.# dump_osd_network [threshold]`, will > > list all connections with a ping time longer than the specified threshold or > > value determined by the config options, for the average for any of the 3 intervals. > > Another new admin command, `ceph daemon osd.# dump_osd_network [threshold]`, > > will do the same but only including heartbeats initiated by the specified OSD. > > > > Changes in the telemetry module: > > > > * The telemetry module now has a 'device' channel, enabled by default, that > > will report anonymized hard disk and SSD health metrics to telemetry.ceph.com > > in order to build and improve device failure prediction algorithms. Because > > the content of telemetry reports has changed, you will need to re-opt-in > > with:: > > > > ceph telemetry on > > > > You can view exactly what information will be reported first with:: > > > > ceph telemetry show > > ceph telemetry show device # specifically show the device channel > > > > If you are not comfortable sharing device metrics, you can disable that > > channel first before re-opting-in: > > > > ceph config set mgr mgr/telemetry/channel_crash false > > ceph telemetry on > > > > * The telemetry module now reports more information about CephFS file systems, > > including: > > > > - how many MDS daemons (in total and per file system) > > - which features are (or have been) enabled > > - how many data pools > > - approximate file system age (year + month of creation) > > - how many files, bytes, and snapshots > > - how much metadata is being cached > > > > We have also added: > > > > - which Ceph release the monitors are running > > - whether msgr v1 or v2 addresses are used for the monitors > > - whether IPv4 or IPv6 addresses are used for the monitors > > - whether RADOS cache tiering is enabled (and which mode) > > - whether pools are replicated or erasure coded, and > > which erasure code profile plugin and parameters are in use > > - how many hosts are in the cluster, and how many hosts have each type of daemon > > - whether a separate OSD cluster network is being used > > - how many RBD pools and images are in the cluster, and how many pools have RBD mirroring enabled > > - how many RGW daemons, zones, and zonegroups are present; which RGW frontends are in use > > - aggregate stats about the CRUSH map, like which algorithms are used, how > > big buckets are, how many rules are defined, and what tunables are in > > use > > > > If you had telemetry enabled, you will need to re-opt-in with:: > > > > ceph telemetry on > > > > You can view exactly what information will be reported first with:: > > > > ceph telemetry show # see everything > > ceph telemetry show basic # basic cluster info (including all of the new info) > > > > OSD: > > > > * A new OSD daemon command, 'dump_recovery_reservations', reveals the > > recovery locks held (in_progress) and waiting in priority queues. > > > > * Another new OSD daemon command, 'dump_scrub_reservations', reveals the > > scrub reservations that are held for local (primary) and remote (replica) PGs. > > > > RGW: > > > > * RGW now supports S3 Object Lock set of APIs allowing for a WORM model for > > storing objects. 6 new APIs have been added put/get bucket object lock, > > put/get object retention, put/get object legal hold. > > > > * RGW now supports List Objects V2 > > > > Getting Ceph > > ------------ > > > > * Git at git://github.com/ceph/ceph.git > > * Tarball at http://download.ceph.com/tarballs/ceph-14.2.5.tar.gz > > * For packages, see http://docs.ceph.com/docs/master/install/get-packages/ > > * Release git sha1: ad5bd132e1492173c85fda2cc863152730b16a92 > > > > -- > > Abhishek Lekshmanan > > SUSE Software Solutions Germany GmbH > _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |