Re: ceph iscsi question

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 16, 2019 at 2:35 AM 展荣臻(信泰) <zhanrzh_xt@xxxxxxxxxxxxxx> wrote:
>
> hi,all
>   we deploy ceph with ceph-ansible.osds,mons and daemons of iscsi runs in docker.
>   I create iscsi target according to https://docs.ceph.com/docs/luminous/rbd/iscsi-target-cli/.
>   I discovered and logined iscsi target on another host,as show below:
>
> [root@node1 tmp]# iscsiadm -m discovery -t sendtargets -p 192.168.42.110
> 192.168.42.110:3260,1 iqn.2003-01.com.teamsun.iscsi-gw:iscsi-igw
> 192.168.42.111:3260,2 iqn.2003-01.com.teamsun.iscsi-gw:iscsi-igw
> [root@node1 tmp]# iscsiadm -m node -T iqn.2003-01.com.teamsun.iscsi-gw:iscsi-igw -p 192.168.42.110 -l
> Logging in to [iface: default, target: iqn.2003-01.com.teamsun.iscsi-gw:iscsi-igw, portal: 192.168.42.110,3260] (multiple)
> Login to [iface: default, target: iqn.2003-01.com.teamsun.iscsi-gw:iscsi-igw, portal: 192.168.42.110,3260] successful.
>
>  /dev/sde is mapped,when i mkfs.xfs -f /dev/sde, an Error occur,
>
> [root@node1 tmp]# mkfs.xfs -f /dev/sde
> meta-data=/dev/sde               isize=512    agcount=4, agsize=1966080 blks
>          =                       sectsz=512   attr=2, projid32bit=1
>          =                       crc=1        finobt=0, sparse=0
> data     =                       bsize=4096   blocks=7864320, imaxpct=25
>          =                       sunit=0      swidth=0 blks
> naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
> log      =internal log           bsize=4096   blocks=3840, version=2
>          =                       sectsz=512   sunit=0 blks, lazy-count=1
> realtime =none                   extsz=4096   blocks=0, rtextents=0
> existing superblock read failed: Input/output error
> mkfs.xfs: pwrite64 failed: Input/output error
>
> message in /var/log/messages:
> Oct 16 14:01:44 localhost kernel: Dev sde: unable to read RDB block 0
> Oct 16 14:01:44 localhost kernel: sde: unable to read partition table
> Oct 16 14:02:17 localhost kernel: Dev sde: unable to read RDB block 0
> Oct 16 14:02:17 localhost kernel: sde: unable to read partition table
>
> we use Luminous ceph.
> what cause this error? how debug it.any suggestion is appreciative.

Please use the associated multipath device, not the raw block device.

>
> _______________________________________________
> ceph-users mailing list
> ceph-users@xxxxxxxxxxxxxx
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com



-- 
Jason

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com




[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux