Hi! Micron_1100_MTFD But not only SSD "too slowly". And HDD - "too quickly". > Hi Fyodor > > Whats the model of SSD? > > Regards > > > -----Mensaje original----- > De: Fyodor Ustinov <ufm@xxxxxx> > Enviado el: martes, 3 de septiembre de 2019 13:13 > Para: ceph-users <ceph-users@xxxxxxx> > Asunto: Strange hardware behavior > > Hi! > > I understand that this question is not quite for this mailing list, but > nonetheless, experts who may be encountered this have gathered here. > > I have 24 servers, and on each, after six months of work, the following > began to happen: > > [root@S-26-5-1-2 cph]# uname -a > Linux S-26-5-1-2 5.2.11-1.el7.elrepo.x86_64 #1 SMP Thu Aug 29 08:10:52 EDT > 2019 x86_64 x86_64 x86_64 GNU/Linux > > [root@S-26-5-1-2 cph]# dd if=/dev/zero of=/dev/sdc bs=1M count=1000 > oflag=sync > 1048576000 bytes (1.0 GB) copied, 3.76334 s, 279 MB/s > > [root@S-26-5-1-2 cph]# dd if=/dev/zero of=/dev/sdd bs=1M count=1000 > oflag=sync > 1048576000 bytes (1.0 GB) copied, 4.54834 s, 231 MB/s > > sdc - SSD disk. sdd - HDD. > > It can be seen that ssd works somehow slowly, and hdd - too quickly. > > Reboot - nothing changes. > > And only poweroff/poweron cycle change behavior to normal: > > [root@S-26-5-1-2 cph]# dd if=/dev/zero of=/dev/sdc bs=1M count=1000 > oflag=sync > 1048576000 bytes (1.0 GB) copied, 3.24042 s, 324 MB/s > > [root@S-26-5-1-2 cph]# dd if=/dev/zero of=/dev/sdd bs=1M count=1000 > oflag=sync > 1048576000 bytes (1.0 GB) copied, 13.7709 s, 76.1 MB/s > > Absoluteli nothing in system and ceph log (this servers used for OSD) about > that. > > Perhaps someone has encountered similar behavior? > > WBR, > Fyodor. > _______________________________________________ > ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email > to ceph-users-leave@xxxxxxx _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |