Hi Frank,
Thanks for sharing valuable experience.
Frank Schilder <frans@xxxxxx> 于2019年7月8日周一 下午4:36写道：
Hi David,
I'm running a cluster with bluestore on raw devices (no lvm) and all journals collocated on the same disk with the data. Disks are spinning NL-SAS. Our goal was to build storage at lowest cost, therefore all data on HDD only. I got a few SSDs that I'm using for FS and RBD meta data. All large pools are EC on spinning disk.
I spent at least one month to run detailed benchmarks (rbd bench) depending on EC profile, object size, write size, etc. Results were varying a lot. My advice would be to run benchmarks with your hardware. If there was a single perfect choice, there wouldn't be so many options. For example, my tests will not be valid when using separate fast disks for WAL and DB.
There are some results though that might be valid in general:
1) EC pools have high throughput but low IOP/s compared with replicated pools
I see single-thread write speeds of up to 1.2GB (gigabyte) per second, which is probably the network limit and not the disk limit. IOP/s get better with more disks, but are way lower than what replicated pools can provide. On a cephfs with EC data pool, small-file IO will be comparably slow and eat a lot of resources.
2) I observe massive network traffic amplification on small IO sizes, which is due to the way EC overwrites are handled. This is one bottleneck for IOP/s. We have 10G infrastructure and use 2x10G client and 4x10G OSD network. OSD bandwidth at least 2x client network, better 4x or more.
3) k should only have small prime factors, power of 2 if possible
I tested k=5,6,8,10,12. Best results in decreasing order: k=8, k=6. All other choices were poor. The value of m seems not relevant for performance. Larger k will require more failure domains (more hardware).
4) object size matters
The best throughput (1M write size) I see with object sizes of 4MB or 8MB, with IOP/s getting somewhat better with slower object sizes but throughput dropping fast. I use the default of 4MB in production. Works well for us.
5) jerasure is quite good and seems most flexible
jerasure is quite CPU efficient and can handle smaller chunk sizes than other plugins, which is preferrable for IOP/s. However, CPU usage can become a problem and a plugin optimized for specific values of k and m might help here. Under usual circumstances I see very low load on all OSD hosts, even under rebalancing. However, I remember that once I needed to rebuild something on all OSDs (I don't remember what it was, sorry). In this situation, CPU load went up to 30-50% (meaning up to half the cores were at 100%), which is really high considering that each server has only 16 disks at the moment and is sized to handle up to 100. CPU power could become a bottle for us neck in the future.
These are some general observations and do not replace benchmarks for specific use cases. I was hunting for a specific performance pattern, which might not be what you want to optimize for. I would recommend to run extensive benchmarks if you have to live with a configuration for a long time - EC profiles cannot be changed.
We settled on 8+2 and 6+2 pools with jerasure and object size 4M. We also use bluestore compression. All meta data pools are on SSD, only very little SSD space is required. This choice works well for the majority of our use cases. We can still build small expensive pools to accommodate special performance requests.
Best regards,
=================
Frank Schilder
AIT Risø Campus
Bygning 109, rum S14
________________________________________
From: ceph-users <ceph-users-bounces@xxxxxxxxxxxxxx> on behalf of David <xiaomajia.st@xxxxxxxxx>
Sent: 07 July 2019 20:01:18
To: ceph-users@xxxxxxxxxxxxxx
Subject: What's the best practice for Erasure Coding
Hi Ceph-Users,
I'm working with a Ceph cluster (about 50TB, 28 OSDs, all Bluestore on lvm).
Recently, I'm trying to use the Erasure Code pool.
My question is "what's the best practice for using EC pools ?".
More specifically, which plugin (jerasure, isa, lrc, shec or clay) should I adopt, and how to choose the combinations of (k,m) (e.g. (k=3,m=2), (k=6,m=3) ).
Does anyone share some experience?
Thanks for any help.
Regards,
David
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
