Hi Robert,
Before doing anything on my prod env, I generate r/w on ceph cluster using fio .
On my newest cluster, release 12.2.12, I did not manage to get the (REQUEST_SLOW) warning, even if my OSD disk usage goes above 95% (fio ran from 4 diffrent hosts)
On my prod cluster, release 12.2.9, as soon as I run fio on a single host, I see a lot of REQUEST_SLOW warninr gmessages, but "iostat -xd 1" does not show me a usage more that 5-10% on disks...
Le lun. 10 juin 2019 à 10:12, Robert LeBlanc <robert@xxxxxxxxxxxxx> a écrit :
On Mon, Jun 10, 2019 at 1:00 AM BASSAGET Cédric <cedric.bassaget.ml@xxxxxxxxx> wrote:Hello Robert,My disks did not reach 100% on the last warning, they climb to 70-80% usage. But I see rrqm / wrqm counters increasing...Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
sda 0.00 4.00 0.00 16.00 0.00 104.00 13.00 0.00 0.00 0.00 0.00 0.00 0.00sdb 0.00 2.00 1.00 3456.00 8.00 25996.00 15.04 5.76 1.67 0.00 1.67 0.03 9.20sdd 4.00 0.00 41462.00 1119.00 331272.00 7996.00 15.94 19.89 0.47 0.48 0.21 0.02 66.00dm-0 0.00 0.00 6825.00 503.00 330856.00 7996.00 92.48 4.00 0.55 0.56 0.30 0.09 66.80
dm-1 0.00 0.00 1.00 1129.00 8.00 25996.00 46.02 1.03 0.91 0.00 0.91 0.09 10.00sda is my system disk (SAMSUNG MZILS480HEGR/007 GXL0), sdb and sdd are my OSDswould "osd op queue = wpq" help in this case ?RegardsYour disk times look okay, just a lot more unbalanced than I would expect. I'd give wpq a try, I use it all the time, just be sure to also include the op_cutoff setting too or it doesn't have much effect. Let me know how it goes.
----------------
Robert LeBlanc
PGP Fingerprint 79A2 9CA4 6CC4 45DD A904 C70E E654 3BB2 FA62 B9F1
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
