Hi,
I have not received any response to this and I haven’t worked on this lately. I hope to revisit RDMA messenger on Nautilus in the future.
Thanks,
Orlando
From: Lazuardi Nasution [mailto:mrxlazuardin@xxxxxxxxx]
Sent: Saturday, May 25, 2019 9:14 PM
To: Moreno, Orlando <orlando.moreno@xxxxxxxxx>; Tang, Haodong <haodong.tang@xxxxxxxxx>
Cc: Ceph Users <ceph-users@xxxxxxxxxxxxxx>
Subject: Re: ceph-users Digest, Vol 60, Issue 26
Is there any response of this thread? I'm interested with this too.
Date: Fri, 26 Jan 2018 21:53:59 +0000
From: "Moreno, Orlando" <orlando.moreno@xxxxxxxxx>
To: "ceph-users@xxxxxxxxxxxxxx" <ceph-users@xxxxxxxxxxxxxx>, Ceph
Development <ceph-devel@xxxxxxxxxxxxxxx>
Cc: "Tang, Haodong" <haodong.tang@xxxxxxxxx>
Subject: [ceph-users] Ceph OSDs fail to start with RDMA
Message-ID:
<034AAD465C6CBE4F96D9FB98573A79A63719E2D5@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"
Hi all,
I am trying to bring up a Ceph cluster where the private network is communicating via RoCEv2. The storage nodes have 2 dual-port 25Gb Mellanox ConnectX-4 NICs, with each NIC's ports bonded (2x25Gb mode 4). I have set memory limits to unlimited, can rping to
each node, and ms_async_rdma_device_name set to the ibdev (mlx5_bond_1). Everything goes smoothly until I start bringing up OSDs. Nothing appears in stderr, but upon further inspection of the OSD log, I see the following error:
RDMAConnectedSocketImpl activate failed to transition to RTR state: (19) No such device
/build/ceph-12.2.2/src/msg/async/rdma/RDMAConnectedSocketImpl.cc: In function 'void RDMAConnectedSocketImpl::handle_connection()' thread 7f908633c700 time 2018-01-26 10:47:51.607573
/build/ceph-12.2.2/src/msg/async/rdma/RDMAConnectedSocketImpl.cc: 221: FAILED assert(!r)
ceph version 12.2.2 (cf0baeeeeba3b47f9427c6c97e2144b094b7e5ba) luminous (stable)
1: (ceph::__ceph_assert_fail(char const*, char const*, int, char const*)+0x102) [0x564a2ccf7892]
2: (RDMAConnectedSocketImpl::handle_connection()+0xb4a) [0x564a2d007fba]
3: (EventCenter::process_events(int, std::chrono::duration<unsigned long, std::ratio<1l, 1000000000l> >*)+0xa08) [0x564a2cd9a418]
4: (()+0xb4f3a8) [0x564a2cd9e3a8]
5: (()+0xb8c80) [0x7f9088c04c80]
6: (()+0x76ba) [0x7f90892f36ba]
7: (clone()+0x6d) [0x7f908836a41d]
NOTE: a copy of the executable, or `objdump -rdS <executable>` is needed to interpret this.
Anyone see this before or have any suggestions?
Thanks,
Orlando
|
