In general, no, this is not an expected behavior.
My guess would be that something odd is happening with the other clients you have to the system, and there's a weird pattern with the way the file locks are being issued. Can you be more precise about exactly what workload you're running, and get the output of the session list on your MDS while doing so?
-Greg
On Wed, Mar 6, 2019 at 9:49 AM Andrew Richards <andrew.richards@xxxxxxxxxxxxxx> wrote:
We discovered recently that our CephFS mount appeared to be halting reads when writes were being synched to the Ceph cluster to the point it was affecting applications.
I also posted this as a Gist with embedded graph images to help illustrate: https://gist.github.com/keeperAndy/aa80d41618caa4394e028478f4ad1694
The following is the plain text from the Gist.
First, details about the host:
````
$ uname -r
4.16.13-041613-generic
$ egrep 'xfs|ceph' /proc/mounts
192.168.1.115:6789,192.168.1.116:6789,192.168.1.117:6789:/ /cephfs ceph rw,noatime,name=cephfs,secret=<hidden>,rbytes,acl,wsize=16777216 0 0
/dev/mapper/tst01-lvidmt01 /rbd_xfs xfs rw,relatime,attr2,inode64,logbsize=256k,sunit=512,swidth=1024,noquota 0 0
$ ceph -v
ceph version 12.2.5 (cad919881333ac92274171586c827e01f554a70a) luminous (stable)
$ cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: adaptive load balancing
Primary Slave: None
Currently Active Slave: net6
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 200
Down Delay (ms): 200
Slave Interface: net8
MII Status: up
Speed: 10000 Mbps
Duplex: full
Link Failure Count: 2
Permanent HW addr: e4:1d:2d:17:71:e1
Slave queue ID: 0
Slave Interface: net6
MII Status: up
Speed: 10000 Mbps
Duplex: full
Link Failure Count: 1
Permanent HW addr: e4:1d:2d:17:71:e0
Slave queue ID: 0
````
We had CephFS mounted alongside an XFS filesystem made up of 16 RBD images aggregated under LVM as our storage targets. The link to the Ceph cluster from the host is a mode 6 2x10GbE bond (bond1 above).
We started capturing network counters from the Ceph cluster connection (bond1) on the host using ifstat at its most granular setting of 0.1 (sampling every tenth of a second). We then ran various overlapping read and write operations in separate shells on the same host to obtain samples of how our different means of accessing Ceph handled this. We converted our ifstat output to CSV and insterted it into a spreadsheet to visualize the network activity.
We found that the CephFS kernel mount did indeed appear to pause ongoing reads when writes were being flushed from the page cache to the Ceph cluster.
We wanted to see if we could make this more pronounced, so we added a 6Gb-limit tc filter to the interface and re-ran our tests. This yielded much lengthier delay periods in the reads while the writes were more slowly flushed from the page cache to the Ceph cluster.
A more restrictive 2Gbit-limit tc filter produced much lengthier delays of our reads as the writes were synched to the cluster.
When we tested the same I/O on the RBD-backed XFS file system on the same host, we found a very different pattern. The reads seemed to be given priority over the write activity, but the writes were only slowed, they were not halted.
Finally we tested overlapping SMB client reads and writes to a Samba share that used the userspace libceph-based VFS_Ceph module to produce the share. In this case, while raw throughput was lower than that of the kernel, the reads and writes did not interrupt each other at all.
Is this expected behavior for the CephFS kernel drivers? Can a CephFS kernel client really not read and write to the file system simultaneously?
Thanks,
Andrew Richards
Senior Systems Engineer
Keeper Technology, LLC
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
