Yep...these are setting already in place. And also followed all recommendations to get performance, but still impacts with osd down..even we have 2000+ osd. And using 3 pools with diff. HW nodes for each pool. One pool's OSD down, also impacts other pools performance... which not expected with Ceph (here are using the separate NICs for data and replication).. On Wed, Feb 20, 2019 at 9:25 PM Alexandru Cucu <me@xxxxxxxxxxx> wrote: > > Hi, > > I would decrese max active recovery processes per osd and increase > recovery sleep. > osd recovery max active = 1 (default is 3) > osd recovery sleep = 1 (default is 0 or 0.1) > > osd max backfills defaults to 1 so that should be OK if he's using the > default :D > > Disabling scrubbing during recovery should also help: > osd scrub during recovery = false > > On Wed, Feb 20, 2019 at 5:47 PM Darius Kasparavičius <daznis@xxxxxxxxx> wrote: > > > > Hello, > > > > > > Check your CPU usage when you are doing those kind of operations. We > > had a similar issue where our CPU monitoring was reporting fine < 40% > > usage, but our load on the nodes was high mid 60-80. If it's possible > > try disabling ht and see the actual cpu usage. > > If you are hitting CPU limits you can try disabling crc on messages. > > ms_nocrc > > ms_crc_data > > ms_crc_header > > > > And setting all your debug messages to 0. > > If you haven't done you can also lower your recovery settings a little. > > osd recovery max active > > osd max backfills > > > > You can also lower your file store threads. > > filestore op threads > > > > > > If you can also switch to bluestore from filestore. This will also > > lower your CPU usage. I'm not sure that this is bluestore that does > > it, but I'm seeing lower cpu usage when moving to bluestore + rocksdb > > compared to filestore + leveldb . > > > > > > On Wed, Feb 20, 2019 at 4:27 PM M Ranga Swami Reddy > > <swamireddy@xxxxxxxxx> wrote: > > > > > > Thats expected from Ceph by design. But in our case, we are using all > > > recommendation like rack failure domain, replication n/w,etc, still > > > face client IO performance issues during one OSD down.. > > > > > > On Tue, Feb 19, 2019 at 10:56 PM David Turner <drakonstein@xxxxxxxxx> wrote: > > > > > > > > With a RACK failure domain, you should be able to have an entire rack powered down without noticing any major impact on the clients. I regularly take down OSDs and nodes for maintenance and upgrades without seeing any problems with client IO. > > > > > > > > On Tue, Feb 12, 2019 at 5:01 AM M Ranga Swami Reddy <swamireddy@xxxxxxxxx> wrote: > > > >> > > > >> Hello - I have a couple of questions on ceph cluster stability, even > > > >> we follow all recommendations as below: > > > >> - Having separate replication n/w and data n/w > > > >> - RACK is the failure domain > > > >> - Using SSDs for journals (1:4ratio) > > > >> > > > >> Q1 - If one OSD down, cluster IO down drastically and customer Apps impacted. > > > >> Q2 - what is stability ratio, like with above, is ceph cluster > > > >> workable condition, if one osd down or one node down,etc. > > > >> > > > >> Thanks > > > >> Swami > > > >> _______________________________________________ > > > >> ceph-users mailing list > > > >> ceph-users@xxxxxxxxxxxxxx > > > >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > _______________________________________________ > > > ceph-users mailing list > > > ceph-users@xxxxxxxxxxxxxx > > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > _______________________________________________ > > ceph-users mailing list > > ceph-users@xxxxxxxxxxxxxx > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |