Hi,
I've got a couple of PGs which are stuck in backfill_toofull, but none
of them are actually full.
"up": [
999,
1900,
145
],
"acting": [
701,
1146,
1880
],
"backfill_targets": [
"145",
"999",
"1900"
],
"acting_recovery_backfill": [
"145",
"701",
"999",
"1146",
"1880",
"1900"
],
I checked all these OSDs, but they are all <75% utilization.
full_ratio 0.95
backfillfull_ratio 0.9
nearfull_ratio 0.9
So I started checking all the PGs and I've noticed that each of these
PGs has one OSD in the 'acting_recovery_backfill' which is marked as out.
In this case osd.1880 is marked as out and thus it's capacity is shown
as zero.
[ceph@ceph-mgr ~]$ ceph osd df|grep 1880
1880 hdd 4.54599 0 0 B 0 B 0 B 0 0 27
[ceph@ceph-mgr ~]$
This is on a Mimic 13.2.4 cluster. Is this expected or is this a unknown
side-effect of one of the OSDs being marked as out?
Thanks,
Wido
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
