Re: Bluestore nvme DB/WAL size

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I am considering using logical volumes of an NVMe drive as DB or WAL 
devices for OSDs on spinning disks.

The documentation recommends against DB devices smaller than 4% of slow 
disk size. Our servers have 16x 10TB HDDs and a single 1.5TB NVMe, so 
dividing it equally will result in each OSD getting ~90GB DB NVMe 
volume, which is a lot less than 4%. Will this cause problems down the road?

This host for 145Tb data on HDDs. You'll be in agony when this NVMe will be dead.



k

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux