Re: 'ceph-deploy osd create' and filestore OSDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Tue, 4 Dec 2018 at 18:04, Vasu Kulkarni <vakulkar@xxxxxxxxxx> wrote:


On Tue, Dec 4, 2018 at 2:42 PM Matthew Pounsett <matt@xxxxxxxxxxxxx> wrote:
you are using HOST:DIR option which is bit old and I think it was supported till jewel,  since you are using 2.0.1 you should be using  only 'osd create' with logical volume or full block device as defined here:  http://docs.ceph.com/docs/mimic/ceph-volume/lvm/prepare/#ceph-volume-lvm-prepare-filestore , ceph-deploy calls ceph-volume with the same underlying syntax. Since this is a VM, you can just add addtional smaller raw devices (eg: /dev/sde ) and use that for journal.

As explained above, we can't just create smaller raw devices.  Yes, these are VMs but they're meant to replicate physical servers that will be used in production, where no such volumes are available.

So.. we're trying to figure out how to replicate the configuration we've been using where the ceph data is stored on the OS filesystem.
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux