Re: Troubleshooting hanging storage backend whenever there is any cluster change

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



and a 3rd one:

    health: HEALTH_WARN
            1 MDSs report slow metadata IOs
            1 MDSs report slow requests

2018-10-13 21:44:08.150722 mds.cloud1-1473 [WRN] 7 slow requests, 1
included below; oldest blocked for > 199.922552 secs
2018-10-13 21:44:08.150725 mds.cloud1-1473 [WRN] slow request 34.829662
seconds old, received at 2018-10-13 21:43:33.321031:
client_request(client.216121228:929114 lookup #0x1/.active.lock
2018-10-13 21:43:33.321594 caller_uid=0, caller_gid=0{}) currently
failed to rdlock, waiting

The relevant OSDs are bluestore again running at 100% I/O:

iostat shows:
sdi              77,00     0,00  580,00   97,00 511032,00   972,00
1512,57    14,88   22,05   24,57    6,97   1,48 100,00

so it reads with 500MB/s which completely saturates the osd. And it does
for > 10 minutes.

Greets,
Stefan

Am 13.10.2018 um 21:29 schrieb Stefan Priebe - Profihost AG:
> 
> ods.19 is a bluestore osd on a healthy 2TB SSD.
> 
> Log of osd.19 is here:
> https://pastebin.com/raw/6DWwhS0A
> 
> Am 13.10.2018 um 21:20 schrieb Stefan Priebe - Profihost AG:
>> Hi David,
>>
>> i think this should be the problem - form a new log from today:
>>
>> 2018-10-13 20:57:20.367326 mon.a [WRN] Health check update: 4 osds down
>> (OSD_DOWN)
>> ...
>> 2018-10-13 20:57:41.268674 mon.a [WRN] Health check update: Reduced data
>> availability: 3 pgs peering (PG_AVAILABILITY)
>> ...
>> 2018-10-13 20:58:08.684451 mon.a [WRN] Health check failed: 1 osds down
>> (OSD_DOWN)
>> ...
>> 2018-10-13 20:58:22.841210 mon.a [WRN] Health check failed: Reduced data
>> availability: 8 pgs inactive (PG_AVAILABILITY)
>> ....
>> 2018-10-13 20:58:47.570017 mon.a [WRN] Health check update: Reduced data
>> availability: 5 pgs inactive (PG_AVAILABILITY)
>> ...
>> 2018-10-13 20:58:49.142108 osd.19 [WRN] Monitor daemon marked osd.19
>> down, but it is still running
>> 2018-10-13 20:58:53.750164 mon.a [WRN] Health check update: Reduced data
>> availability: 3 pgs inactive (PG_AVAILABILITY)
>> ...
>>
>> so there is a timeframe of > 90s whee PGs are inactive and unavail -
>> this would at least explain stalled I/O to me?
>>
>> Greets,
>> Stefan
>>
>>
>> Am 12.10.2018 um 15:59 schrieb David Turner:
>>> The PGs per OSD does not change unless the OSDs are marked out.  You
>>> have noout set, so that doesn't change at all during this test.  All of
>>> your PGs peered quickly at the beginning and then were active+undersized
>>> the rest of the time, you never had any blocked requests, and you always
>>> had 100MB/s+ client IO.  I didn't see anything wrong with your cluster
>>> to indicate that your clients had any problems whatsoever accessing data.
>>>
>>> Can you confirm that you saw the same problems while you were running
>>> those commands?  The next thing would seem that possibly a client isn't
>>> getting an updated OSD map to indicate that the host and its OSDs are
>>> down and it's stuck trying to communicate with host7.  That would
>>> indicate a potential problem with the client being unable to communicate
>>> with the Mons maybe?  Have you completely ruled out any network problems
>>> between all nodes and all of the IPs in the cluster.  What does your
>>> client log show during these times?
>>>
>>> On Fri, Oct 12, 2018 at 8:35 AM Nils Fahldieck - Profihost AG
>>> <n.fahldieck@xxxxxxxxxxxx <mailto:n.fahldieck@xxxxxxxxxxxx>> wrote:
>>>
>>>     Hi, in our `ceph.conf` we have:
>>>
>>>       mon_max_pg_per_osd = 300
>>>
>>>     While the host is offline (9 OSDs down):
>>>
>>>       4352 PGs * 3 / 62 OSDs ~ 210 PGs per OSD
>>>
>>>     If all OSDs are online:
>>>
>>>       4352 PGs * 3 / 71 OSDs ~ 183 PGs per OSD
>>>
>>>     ... so this doesn't seem to be the issue.
>>>
>>>     If I understood you right, that's what you've meant. If I got you wrong,
>>>     would you mind to point to one of those threads you mentioned?
>>>
>>>     Thanks :)
>>>
>>>     Am 12.10.2018 um 14:03 schrieb Burkhard Linke:
>>>     > Hi,
>>>     >
>>>     >
>>>     > On 10/12/2018 01:55 PM, Nils Fahldieck - Profihost AG wrote:
>>>     >> I rebooted a Ceph host and logged `ceph status` & `ceph health
>>>     detail`
>>>     >> every 5 seconds. During this I encountered 'PG_AVAILABILITY
>>>     Reduced data
>>>     >> availability: pgs peering'. At the same time some VMs hung as
>>>     described
>>>     >> before.
>>>     >
>>>     > Just a wild guess... you have 71 OSDs and about 4500 PG with size=3.
>>>     > 13500 PG instance overall, resulting in ~190 PGs per OSD under normal
>>>     > circumstances.
>>>     >
>>>     > If one host is down and the PGs have to re-peer, you might reach the
>>>     > limit of 200 PG/OSDs on some of the OSDs, resulting in stuck peering.
>>>     >
>>>     > You can try to raise this limit. There are several threads on the
>>>     > mailing list about this.
>>>     >
>>>     > Regards,
>>>     > Burkhard
>>>     >
>>>     _______________________________________________
>>>     ceph-users mailing list
>>>     ceph-users@xxxxxxxxxxxxxx <mailto:ceph-users@xxxxxxxxxxxxxx>
>>>     http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>>
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com




[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux