so, it seems OSD03 is having issues when creating disks ( I can create target and hosts ) - here is an excerpt from api.log
Please note I can create disk on the other node
2018-10-10 16:03:03,369 DEBUG [lun.py:381:allocate()] - LUN.allocate starting, listing rbd devices
2018-10-10 16:03:03,381 DEBUG [lun.py:384:allocate()] - rados pool 'rbd' contains the following - [u'datastoretest', u'datastoretest2', u'disk1', u'dstest', u'scstimage1', u'test2']
2018-10-10 16:03:03,382 DEBUG [lun.py:389:allocate()] - Hostname Check - this host is osd03, target host for allocations is osd03
2018-10-10 16:03:03,428 DEBUG [common.py:272:add_item()] - (Config.add_item) config updated to {u'updated': u'2018/10/10 20:02:24', u'disks': {'rbd.dstest2': {'created': '2018/10/10 20:03:03'}}, u'created': u'2018/10/10 19:56:05', u'clients': {}, u'epoch': 4, u'version': 3, u'gateways': {u'osd03': {u'gateway_ip_list': [u'10.10.30.183', u'10.10.30.181'], u'active_luns': 0, u'created': u'2018/10/10 20:02:12', u'updated': u'2018/10/10 20:02:24', u'iqn': u'iqn.2003-01.com.redhat.iscsi-gw:iscsi-ceph', u'inactive_portal_ips': [u'10.10.30.181'], u'portal_ip_address': u'10.10.30.183', u'tpgs': 2}, u'osd01': {u'gateway_ip_list': [u'10.10.30.183', u'10.10.30.181'], u'active_luns': 0, u'created': u'2018/10/10 20:02:24', u'updated': u'2018/10/10 20:02:24', u'iqn': u'iqn.2003-01.com.redhat.iscsi-gw:iscsi-ceph', u'inactive_portal_ips': [u'10.10.30.183'], u'portal_ip_address': u'10.10.30.181', u'tpgs': 2}, u'iqn': u'iqn.2003-01.com.redhat.iscsi-gw:iscsi-ceph', u'ip_list': [u'10.10.30.183', u'10.10.30.181'], u'created': u'2018/10/10 20:01:39'}, u'groups': {}}
2018-10-10 16:03:03,429 INFO [lun.py:405:allocate()] - (LUN.allocate) created rbd/dstest2 successfully
2018-10-10 16:03:03,429 DEBUG [lun.py:444:allocate()] - Check the rbd image size matches the request
2018-10-10 16:03:03,429 DEBUG [lun.py:467:allocate()] - Begin processing LIO mapping
2018-10-10 16:03:03,429 INFO [lun.py:656:add_dev_to_lio()] - (LUN.add_dev_to_lio) Adding image 'rbd.dstest2' to LIO
2018-10-10 16:03:03,429 DEBUG [lun.py:666:add_dev_to_lio()] - control="max_data_area_mb=8"
2018-10-10 16:03:03,438 INFO [_internal.py:87:_log()] - 127.0.0.1 - - [10/Oct/2018 16:03:03] "PUT /api/_disk/rbd.dstest2 HTTP/1.1" 500 -
2018-10-10 16:03:03,439 ERROR [rbd-target-api:1810:call_api()] - _disk change on 127.0.0.1 failed with 500
2018-10-10 16:03:03,439 INFO [_internal.py:87:_log()] - 127.0.0.1 - - [10/Oct/2018 16:03:03] "PUT /api/disk/rbd.dstest2 HTTP/1.1" 500 -
I remove gateway.conf object and install latest rpms on it as follows but the error persist
Alos rebooted the server
ceph-iscsi-cli-2.7-54.g9b18a3b.el7.noarch.rpm
python2-kmod-0.9-20.fc29.x86_64.rpm
python2-rtslib-2.1.fb67-3.fc28.noarch.rpm
ceph-iscsi-config-2.6-42.gccca57d.el7.noarch.rpm
python2-pyudev-0.21.0-8.fc29.noarch.rpm
tcmu-runner-1.4.0-1.el7.x86_64.rpm
On Wed, 10 Oct 2018 at 13:52, Mike Christie <mchristi@xxxxxxxxxx> wrote:
On 10/10/2018 08:21 AM, Steven Vacaroaia wrote:
> Hi Jason,
> Thanks for your prompt responses
>
> I have used same iscsi-gateway.cfg file - no security changes - just
> added prometheus entry
> There is no iscsi-gateway.conf but the gateway.conf object is created
> and has correct entries
>
> iscsi-gateway.cfg is identical and contains the following
>
> [config]
> cluster_name = ceph
> gateway_keyring = ceph.client.admin.keyring
> api_secure = false
> trusted_ip_list =
> 10.10.30.181,10.10.30.182,10.10.30.183,10.10.30.184,10.10.30.185,10.10.30.186
> prometheus_host = 0.0.0.0
>
>
>
> I am running the disks commands from OSD01 and they fail with the following
>
> INFO [gateway.py:344:load_config()] - (Gateway.load_config) successfully
> loaded existing target definition
> 2018-10-10 09:04:48,956 DEBUG [gateway.py:423:map_luns()] -
> processing tpg2
> 2018-10-10 09:04:48,956 DEBUG [gateway.py:428:map_luns()] -
> rbd.dstest needed mapping to tpg2
> 2018-10-10 09:04:48,958 INFO
> [gateway.py:403:bind_alua_group_to_lun()] - Setup group ao for
> rbd.dstest on tpg 2 (state 0, owner True, failover type 1)
> 2018-10-10 09:04:48,958 DEBUG
> [gateway.py:405:bind_alua_group_to_lun()] - Setting Luns tg_pt_gp to ao
> 2018-10-10 09:04:48,959 DEBUG
> [gateway.py:409:bind_alua_group_to_lun()] - Bound rbd.dstest on tpg2 to ao
> 2018-10-10 09:04:48,959 DEBUG [gateway.py:423:map_luns()] -
> processing tpg1
> 2018-10-10 09:04:48,959 DEBUG [gateway.py:428:map_luns()] -
> rbd.dstest needed mapping to tpg1
> 2018-10-10 09:04:48,960 INFO
> [gateway.py:403:bind_alua_group_to_lun()] - Setup group ano1 for
> rbd.dstest on tpg 1 (state 1, owner False, failover type 1)
> 2018-10-10 09:04:48,960 DEBUG
> [gateway.py:405:bind_alua_group_to_lun()] - Setting Luns tg_pt_gp to ano1
> 2018-10-10 09:04:48,961 DEBUG
> [gateway.py:409:bind_alua_group_to_lun()] - Bound rbd.dstest on tpg1 to ano1
> 2018-10-10 09:04:48,963 INFO [_internal.py:87:_log()] - 127.0.0.1 -
> - [10/Oct/2018 09:04:48] "PUT /api/_disk/rbd.dstest HTTP/1.1" 200 -
> 2018-10-10 09:04:48,965 INFO [rbd-target-api:1804:call_api()] -
> _disk update on 127.0.0.1, successful
> 2018-10-10 09:04:48,965 DEBUG [rbd-target-api:1789:call_api()] -
> processing GW 'osd03'
> 2018-10-10 09:04:49,039 ERROR [rbd-target-api:1810:call_api()] -
> _disk change on osd03 failed with 500
> 2018-10-10 09:04:49,041 INFO [_internal.py:87:_log()] - 127.0.0.1 -
> - [10/Oct/2018 09:04:49] "PUT /api/disk/rbd.dstest HTTP/1.1" 500 -
>
>
> on OSD03 there is the folowing "error"
>
> INFO [lun.py:656:add_dev_to_lio()] - (LUN.add_dev_to_lio) Adding image
> 'rbd.dstest' to LIO
> 2018-10-10 09:04:49,037 DEBUG [lun.py:666:add_dev_to_lio()] -
> control="max_data_area_mb=8"
>
> Amazingly enough, gwcli on OSD03 show the disk created but on OSD01 it
> does not
> If I restart gwcli on OSD01 , disk is there but it cannot be added to
> the host because it image does not exist ???
What is the output of
systemctl status rbd-target-api
systemctl status rbd-target-gw
Is api in a failed state or does it indicate it has been crashing and
restarting?
Does /var/log/messages show that rbd-target-api is crashing and
restarting and could you attach the stack trace? The
/var/log/rbd-target-api log will show
Does
gwcli ls
show it cannot reach the remote gateways?
>
> adding the disk to the hosts failed with "client masking update" error
>
> disk add rbd.dstest
> CMD: ../hosts/<client_iqn> disk action="" disk=rbd.dstest
> Client 'iqn.1998-01.com.vmware:test-2d06960a' update - add disk rbd.dstest
> disk add for 'rbd.dstest' against iqn.1998-01.com.vmware:test-2d06960a
> failed
> client masking update failed on osd03. Client update failed
>
> rbd-target-api:1216:_update_client()] - client update failed on
> iqn.1998-01.com.vmware:test-2d06960a : Non-existent images
> ['rbd.dstest'] requested for iqn.1998-01.com.vmware:test-2d06960a
>
> However, the image is listed on gwcli and using rados ls
>
> /disks> ls
> o- disks
> ..........................................................................................................
> [150G, Disks: 1]
> o- rbd.dstest
> ....................................................................................................
> [dstest (150G)]
>
> rados -p rbd ls | grep dstest
> rbd_id.dstest
>
>
>
> I would really appreciate any help / suggestions
>
> Thanks
> Steven
>
> On Tue, 9 Oct 2018 at 16:35, Jason Dillaman <jdillama@xxxxxxxxxx
> <mailto:jdillama@xxxxxxxxxx>> wrote:
>
> Anything in the rbd-target-api.log on osd03 to indicate why it failed?
>
> Since you replaced your existing "iscsi-gateway.conf", do your
> security settings still match between the two hosts (i.e. on the
> trusted_ip_list, same api_XYZ options)?
> On Tue, Oct 9, 2018 at 4:25 PM Steven Vacaroaia <stef97@xxxxxxxxx
> <mailto:stef97@xxxxxxxxx>> wrote:
> >
> > so the gateways are up but I have issues adding disks ( i.e. if I
> do it on one gatway it does not show on the other - however, after I
> restart the rbd-target services I am seeing the disks )
> > Thanks in advance for taking the trouble to provide advice / guidance
> >
> > 2018-10-09 16:16:08,968 INFO [rbd-target-api:1804:call_api()]
> - _clientlun update on 127.0.0.1, successful
> > 2018-10-09 16:16:08,968 DEBUG [rbd-target-api:1789:call_api()]
> - processing GW 'osd03'
> > 2018-10-09 16:16:08,987 ERROR [rbd-target-api:1810:call_api()]
> - _clientlun change on osd03 failed with 500
> > 2018-10-09 16:16:08,987 DEBUG [rbd-target-api:1827:call_api()]
> - failed on osd03, applied to 127.0.0.1, aborted osd03. Client
> update failed
> > 2018-10-09 16:16:08,987 INFO [_internal.py:87:_log()] -
> 127.0.0.1 - - [09/Oct/2018 16:16:08] "PUT
> /api/clientlun/iqn.1998-01.com.vmware:test-2d06960a HTTP/1.1" 500 -
> >
> > On Tue, 9 Oct 2018 at 15:42, Steven Vacaroaia <stef97@xxxxxxxxx
> <mailto:stef97@xxxxxxxxx>> wrote:
> >>
> >> It worked.
> >>
> >> many thanks
> >> Steven
> >>
> >> On Tue, 9 Oct 2018 at 15:36, Jason Dillaman <jdillama@xxxxxxxxxx
> <mailto:jdillama@xxxxxxxxxx>> wrote:
> >>>
> >>> Can you try applying [1] and see if that resolves your issue?
> >>>
> >>> [1] https://github.com/ceph/ceph-iscsi-config/pull/78
> >>> On Tue, Oct 9, 2018 at 3:06 PM Steven Vacaroaia
> <stef97@xxxxxxxxx <mailto:stef97@xxxxxxxxx>> wrote:
> >>> >
> >>> > Thanks Jason
> >>> >
> >>> > adding prometheus_host = 0.0.0.0 to iscsi-gateway.cfg does not
> work - the error message is
> >>> >
> >>> > "..rbd-target-gw: ValueError: invalid literal for int() with
> base 10: '0.0.0.0' "
> >>> >
> >>> > adding prometheus_exporter = false works
> >>> >
> >>> > However I'd like to use prometheus_exporter if possible
> >>> > Any suggestions will be appreciated
> >>> >
> >>> > Steven
> >>> >
> >>> >
> >>> >
> >>> > On Tue, 9 Oct 2018 at 14:25, Jason Dillaman
> <jdillama@xxxxxxxxxx <mailto:jdillama@xxxxxxxxxx>> wrote:
> >>> >>
> >>> >> You can try adding "prometheus_exporter = false" in your
> >>> >> "/etc/ceph/iscsi-gateway.cfg"'s "config" section if you
> aren't using
> >>> >> "cephmetrics", or try setting "prometheus_host = 0.0.0.0"
> since it
> >>> >> sounds like you have the IPv6 stack disabled.
> >>> >>
> >>> >> [1]
> https://github.com/ceph/ceph-iscsi-config/blob/master/ceph_iscsi_config/settings.py#L90
> >>> >> On Tue, Oct 9, 2018 at 2:09 PM Steven Vacaroaia
> <stef97@xxxxxxxxx <mailto:stef97@xxxxxxxxx>> wrote:
> >>> >> >
> >>> >> > here is some info from /var/log/messages ..in case someone
> has the time to take a look
> >>> >> >
> >>> >> > Oct 9 13:58:35 osd03 systemd: Started Setup system to
> export rbd images through LIO.
> >>> >> > Oct 9 13:58:35 osd03 systemd: Starting Setup system to
> export rbd images through LIO...
> >>> >> > Oct 9 13:58:35 osd03 journal: Processing osd blacklist
> entries for this node
> >>> >> > Oct 9 13:58:35 osd03 journal: No OSD blacklist entries found
> >>> >> > Oct 9 13:58:35 osd03 journal: Reading the configuration
> object to update local LIO configuration
> >>> >> > Oct 9 13:58:35 osd03 journal: Configuration does not have
> an entry for this host(osd03) - nothing to define to LIO
> >>> >> > Oct 9 13:58:35 osd03 journal: Integrated Prometheus
> exporter is enabled
> >>> >> > Oct 9 13:58:35 osd03 journal: * Running on http://[::]:9287/
> >>> >> > Oct 9 13:58:35 osd03 journal: Removing iSCSI target from LIO
> >>> >> > Oct 9 13:58:35 osd03 journal: Removing LUNs from LIO
> >>> >> > Oct 9 13:58:35 osd03 journal: Active Ceph iSCSI gateway
> configuration removed
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: Traceback (most recent
> call last):
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/bin/rbd-target-gw", line 5, in <module>
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw:
> pkg_resources.run_script('ceph-iscsi-config==2.6', 'rbd-target-gw')
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/lib/python2.7/site-packages/pkg_resources.py", line 540, in
> run_script
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw:
> self.require(requires)[0].run_script(script_name, ns)
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/lib/python2.7/site-packages/pkg_resources.py", line 1462, in
> run_script
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: exec_(script_code,
> namespace, namespace)
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/lib/python2.7/site-packages/pkg_resources.py", line 41, in exec_
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: exec("""exec code in
> globs, locs""")
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File "<string>", line
> 1, in <module>
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/lib/python2.7/site-packages/ceph_iscsi_config-2.6-py2.7.egg/EGG-INFO/scripts/rbd-target-gw",
> line 432, in <module>
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/lib/python2.7/site-packages/ceph_iscsi_config-2.6-py2.7.egg/EGG-INFO/scripts/rbd-target-gw",
> line 379, in main
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/lib/python2.7/site-packages/flask/app.py", line 772, in run
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: run_simple(host, port,
> self, **options)
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/lib/python2.7/site-packages/werkzeug/serving.py", line 710, in
> run_simple
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: inner()
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/lib/python2.7/site-packages/werkzeug/serving.py", line 692, in
> inner
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: passthrough_errors,
> ssl_context).serve_forever()
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/lib/python2.7/site-packages/werkzeug/serving.py", line 480, in
> make_server
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: passthrough_errors,
> ssl_context)
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/lib/python2.7/site-packages/werkzeug/serving.py", line 410, in
> __init__
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw:
> HTTPServer.__init__(self, (host, int(port)), handler)
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/lib64/python2.7/SocketServer.py", line 417, in __init__
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: self.socket_type)
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: File
> "/usr/lib64/python2.7/socket.py", line 187, in __init__
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: _sock =
> _realsocket(family, type, proto)
> >>> >> > Oct 9 13:58:35 osd03 rbd-target-gw: socket.error: [Errno
> 97] Address family not supported by protocol
> >>> >> > Oct 9 13:58:35 osd03 systemd: rbd-target-gw.service: main
> process exited, code=exited, status=1/FAILURE
> >>> >> >
> >>> >> >
> >>> >> > On Tue, 9 Oct 2018 at 13:16, Steven Vacaroaia
> <stef97@xxxxxxxxx <mailto:stef97@xxxxxxxxx>> wrote:
> >>> >> >>
> >>> >> >> Hi ,
> >>> >> >> I am using Mimic 13.2 and kernel 4.18
> >>> >> >> Was using gwcli 2.5 and decided to upgrade to latest (2.7)
> as people reported improved performance
> >>> >> >>
> >>> >> >> What is the proper methodology ?
> >>> >> >> How should I troubleshoot this?
> >>> >> >>
> >>> >> >>
> >>> >> >>
> >>> >> >> What I did ( and it broke it) was
> >>> >> >>
> >>> >> >> cd tcmu-runner; git pull ; make && make install
> >>> >> >> cd ceph-iscsi-cli; git pull;python setup.py install
> >>> >> >> cd ceph-iscsi-config;git pull; python setup.py install
> >>> >> >> cd rtslib-fb;git pull; python setup.py install
> >>> >> >>
> >>> >> >> After a reboot, I cannot start rbd-target-gw and the logs
> are not very helpful
> >>> >> >> ( Note:
> >>> >> >> I removed /etc/ceph/iscsi-gateway.cfg and gateway.conf
> object as I wanted to start fresh
> >>> >> >> /etc/ceph/iscsi-gatway.conf was left unchanged )
> >>> >> >>
> >>> >> >>
> >>> >> >> 2018-10-09 12:47:50,593 [ INFO] - Processing osd
> blacklist entries for this node
> >>> >> >> 2018-10-09 12:47:50,893 [ INFO] - No OSD blacklist
> entries found
> >>> >> >> 2018-10-09 12:47:50,893 [ INFO] - Reading the
> configuration object to update local LIO configuration
> >>> >> >> 2018-10-09 12:47:50,893 [ INFO] - Configuration does
> not have an entry for this host(osd03) - nothing to define to LIO
> >>> >> >> 2018-10-09 12:47:50,893 [ INFO] - Integrated Prometheus
> exporter is enabled
> >>> >> >> 2018-10-09 12:47:50,895 [ INFO] - * Running on
> http://[::]:9287/
> >>> >> >> 2018-10-09 12:47:50,896 [ INFO] - Removing iSCSI target
> from LIO
> >>> >> >> 2018-10-09 12:47:50,896 [ INFO] - Removing LUNs from LIO
> >>> >> >> 2018-10-09 12:47:50,896 [ INFO] - Active Ceph iSCSI
> gateway configuration removed
> >>> >> >>
> >>> >> >> Many thanks
> >>> >> >> Steven
> >>> >> >>
> >>> >> > _______________________________________________
> >>> >> > ceph-users mailing list
> >>> >> > ceph-users@xxxxxxxxxxxxxx <mailto:ceph-users@xxxxxxxxxxxxxx>
> >>> >> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> >>> >>
> >>> >>
> >>> >>
> >>> >> --
> >>> >> Jason
> >>>
> >>>
> >>>
> >>> --
> >>> Jason
>
>
>
> --
> Jason
>
>
>
> _______________________________________________
> ceph-users mailing list
> ceph-users@xxxxxxxxxxxxxx
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
