Hi Enrico,
On Fri, Jun 29, 2018 at 7:50 PM Enrico Kern <enrico.kern@xxxxxxxxxx> wrote:
hmm that also pops up right away when i restart all radosgw instances. But i will check further and see if i can find something. Maybe doing the upgrade to mimic too.That bucket is basically under load on the master zone all the time as we use it as historical storage for druid, so there is constantly data written to it. I just dont get why disabling/enabling sync on the bucket flawless syncs everything while if i just keep it enabled it stops syncing at all. For the last days i was just running disabling/enabling for the bucket in a while loop with 30 minute interval, but thats no persistent fix ;)
Are you using Haproxy? we have seen sync stales with it.
The simplest work around is to configure the radosgw's addresses as the sync endpoints not the haproxy's.
Regards,
Orit
On Fri, Jun 29, 2018 at 6:15 PM Yehuda Sadeh-Weinraub <yehuda@xxxxxxxxxx> wrote:On Fri, Jun 29, 2018 at 8:48 AM, Enrico Kern <enrico.kern@xxxxxxxxxx> wrote:also when i try to sync the bucket manual i get this error:ERROR: sync.run() returned ret=-162018-06-29 15:47:50.137268 7f54b7e4ecc0 0 data sync: ERROR: failed to read sync status for bucketname:6a9448d2-bdba-4bec-aad6-aba72cd8eac6.27150814.1it works flawless with all other buckets.error 16 is EBUSY: meaning it can't take a lease to do work on the bucket. This usually happens when another entity (e.g., a running radosgw process) is working on it at the same time. Either something took the lease and never gave it back (leases shouldn't be indefinite, usually are being taken for a short period but are renewed periodically), or there might be some other bug related to the lease itself. I would start by first figuring out whether it's the first case or the second one. On the messenger log there should be a message prior to that that shows the operation that got the -16 as a response (should have something like "...=-16 (Device or resource busy)" in it). The same line would also contain the name of the rados object that is used to manage the lease. Try to look at the running radosgw log at the same time when this happens, and check whether there are other operations on that object.One thing to note is that if you run a sync on a bucket and stop it uncleanly in the middle (e.g., like killing the process), the leak will stay locked for a period of time (Something in the order of 1 to 2 minutes).YehudaOn Fri, Jun 29, 2018 at 5:39 PM Enrico Kern <enrico.kern@xxxxxxxxxx> wrote:Hello,thanks for the reply.We have around 200k objects in the bucket. It is not automatic resharded (is that even supported in multisite?)What i see when i run a complete data sync with the debug logs after a while i see alot of informations that it is unable to perform some log and also some device or resource busy (also with alot of different osds, restarting the osds also doesnt make this error going away):018-06-29 15:18:30.391085 7f38bf882cc0 20 cr:s=0x55de55700b20:op=0x55de55717010:20RGWContinuousLeaseCR: couldn't lock amsterdam.rgw.log:datalog.sync-status.shard.6a9448d2-bdba-4bec-aad6-aba72cd8eac6.59:sync_lock: retcode=-162018-06-29 15:18:30.391094 7f38bf882cc0 20 cr:s=0x55de55732750:op=0x55de5572d970:20RGWContinuousLeaseCR: couldn't lock amsterdam.rgw.log:datalog.sync-status.shard.6a9448d2-bdba-4bec-aad6-aba72cd8eac6.10:sync_lock: retcode=-162018-06-29 15:22:01.618744 7f38ad4c7700 1 -- 10.30.3.67:0/3390890604 <== osd.43 10.30.3.44:6800/29982 13272 ==== osd_op_reply(258628 datalog.sync-status.shard.6a9448d2-bdba-4bec-aad6-aba72cd8eac6.52 [call] v14448'24265315 uv24265266 _ondisk_ = -16 ((16) Device or resource busy)) v8 ==== 209+0+0 (2379682838 0 0) 0x7f38a8005110 con 0x7f38680033802018-06-29 15:22:01.618829 7f38ad4c7700 1 -- 10.30.3.67:0/3390890604 <== osd.43 10.30.3.44:6800/29982 13273 ==== osd_op_reply(258629 datalog.sync-status.shard.6a9448d2-bdba-4bec-aad6-aba72cd8eac6.105 [call] v14448'24265316 uv24265256 _ondisk_ = -16 ((16) Device or resource busy)) v8 ==== 210+0+0 (4086289880 0 0) 0x7f38a8005110 con 0x7f3868003380There are no issues with the OSDs all other stuff in the cluster works (rbd, images to openstack etc.)Also that command with appending debug never finishes.On Tue, Jun 26, 2018 at 5:45 PM Yehuda Sadeh-Weinraub <yehuda@xxxxxxxxxx> wrote:On Sun, Jun 24, 2018 at 12:59 AM, Enrico Kern <enrico.kern@xxxxxxxxxxxxxxx> wrote:Hello,We have two ceph luminous clusters (12.2.5).recently one of our big buckets stopped syncing properly. We have a one specific bucket which is around 30TB in size consisting of alot of directories with each one having files of 10-20MB.The secondary zone is often completly missing multiple days of data in this bucket, while all other smaller buckets sync just fine.Even with the complete data missing radosgw-admin sync status always says everything is fine.the sync error log doesnt show anything for those days.Runningradosgw-admin metadata sync and data sync also doesnt solve the issue. The only way of making it sync again is to disable and re-eanble the sync. That needs to be done as often as like 10 times in an hour to make it sync properly.radosgw-admin bucket sync disableradosgw-admin bucket sync enablewhen i run data init i sometimes get this:radosgw-admin data sync init --source-zone berlin2018-06-24 07:55:46.337858 7fe7557fa700 0 ERROR: failed to distribute cache for amsterdam.rgw.log:datalog.sync-status.6a9448d2-bdba-4bec-aad6-aba72cd8eac6Sometimes when really alot of data is missing (yesterday it was more then 1 month) this helps making them get in sync again when run on the secondary zone:radosgw-admin bucket check --fix --check-objectshow can i debug that problem further? We have so many requests on the cluster that is is hard to dig something out of the log files..Given all the smaller buckets are perfectly in sync i suspect some problem because of the size of the bucket.How many objects in the bucket? Is it getting automatically resharded?Any points to the right direction are greatly appreciated.A few things to look at that might help identify the issue.What does this show (I think the luminous command is as follows):$ radosgw-admin bucket sync status --source-zone=<zone>You can try manually syncing the bucket, and get specific logs for that operation:$ radosgw-admin bucket sync run -source-zone=<zone> --debug-rgw=20 --debug-ms=1And you can try getting more info from the sync trace module:$ ceph --admin-daemon <path to radosgw admin socket> sync trace history <bucket name>You can also try the 'sync trace show' command.YehudaRegards,Enrico--
Enrico KernVP IT Operations+49 (0) 30 555713017 / +49 (0) 152 26814501skype: flyersa
LinkedIn Profile
Glispa GmbH | Berlin Office
Sonnenburger Straße 73
10437 Berlin | Germany
Managing Director Din Karol-Gavish
Registered in Berlin
AG Charlottenburg | HRB 114678B
–––––––––––––––––––––––––––––
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
Enrico KernVP IT Operations+49 (0) 30 555713017 / +49 (0) 152 26814501skype: flyersa
LinkedIn Profile
Glispa GmbH | Berlin Office
Sonnenburger Straße 73
10437 Berlin | Germany
Managing Director Din Karol-Gavish
Registered in Berlin
AG Charlottenburg | HRB 114678B
–––––––––––––––––––––––––––––--
Enrico KernVP IT Operations+49 (0) 30 555713017 / +49 (0) 152 26814501skype: flyersa
LinkedIn Profile
Glispa GmbH | Berlin Office
Sonnenburger Straße 73
10437 Berlin | Germany
Managing Director Din Karol-Gavish
Registered in Berlin
AG Charlottenburg | HRB 114678B
–––––––––––––––––––––––––––––--_______________________________________________
Enrico KernVP IT Operations+49 (0) 30 555713017 / +49 (0) 152 26814501skype: flyersa
LinkedIn Profile
Glispa GmbH | Berlin Office
Sonnenburger Straße 73
10437 Berlin | Germany
Managing Director Din Karol-Gavish
Registered in Berlin
AG Charlottenburg | HRB 114678B
–––––––––––––––––––––––––––––
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
