|
I did it of course! :)
However I found the real issue.
While I was playing with multipath I disabled some feature from
RBD image, one of this was EXCLUSIVE LOCK, because I was thinking
it was related to the issue with multipath.
Instead this brake the RBD iscsi target on gateway side (but not
immediatly, brake apply on for new gateway or rebooted server).
So I figure out only when I reboot another node that gateway would
not come up again.
Disabling Exclusive Lock will make the Gateway Crash and
"gwcli" will show you the 500 error status code.
Reanabling the feature and rebooting gateway one by one solve the
issue.
Maybe it's better to lock feature on RBD pool managed by APPs.
So nobody could make some distructive changes to features like I
did it.
Thanks! :)
Il 13/06/2018 16:15, Jason Dillaman ha
scritto:
I've never used XenServer, but I'd imagine you would need to do
something similar to what is documented here [1].
[1] http://docs.ceph.com/docs/master/rbd/iscsi-initiator-linux/
On Wed, Jun 13, 2018 at 5:11 AM, Max Cuttins <max@xxxxxxxxxxxxx> wrote:
I just realize there is a an error:
multipath -r
Jun 13 11:02:27 | rbd0: HDIO_GETGEO failed with 25
reload: mpatha (360014051b4fb8c6384545b7ae7d5142e) undef LIO-ORG ,TCMU
device
size=100G features='1 queue_if_no_path' hwhandler='1 alua' wp=undef
|-+- policy='queue-length 0' prio=130 status=undef
| `- 5:0:0:0 sdb 8:16 active ready running
`-+- policy='queue-length 0' prio=1 status=undef
`- 4:0:0:0 sda 8:0 active ghost running
I have added these lines to blacklist in /etc/multipath.conf
blacklist {
devnode "^(rbd)[0-9]*"
}
This solved the error, but..... gateway still not updated.
Il 13/06/2018 10:59, Max Cuttins ha scritto:
Hi everybody,
maybe I miss something but multipath is not adding new iscsi gateways.
I have installed 2 gateway and test it on a client.
Everything worked fine.
After that I decided to complete install and create a 3rd gateway.
But no one iscsi initiatior client update the number of gateways.
One clients broke up and now cannot write anymore to the disk (can read the
size of volume but cannot read or write).
I have runned:
systemctl restart multipathd
and also:
multipath -r
but this always display only 2 paths:
multipath -ll
mpatha (360014051b4fb8c6384545b7ae7d5142e) dm-2 LIO-ORG ,TCMU device
size=100G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
|-+- policy='queue-length 0' prio=130 status=active
| `- 5:0:0:0 sdb 8:16 active ready running
`-+- policy='queue-length 0' prio=1 status=enabled
`- 4:0:0:0 sda 8:0 active ghost running
What I shoulded did?
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
|
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
