|
(newbie warning - my first go-round with ceph, doing a lot of reading)
data (OSD’s) and one for metadata. One client machine.
I made a network change. When I installed and configured the cluster, it was done
using the system’s 10Gb interface information. I now have everything on a
100Gb network (IB in Ethernet mode).
My question is, what is the most expedient way for me to change the ceph config
such that all nodes are using the 100Gb network? Can I shut down the cluster,
edit one or more .conf files and restart, or do I need to re-configure from scratch?
Thanks
Jim
cepher@srv-01:~$ sudo ceph --version
ceph version 11.2.1 (e0354f9d3b1eea1d75a7dd487ba8098311be38a7)
cepher@srv-01:~$ sudo ceph -s
cluster f201e454-9c73-4b29-abe1-48dd609266a6
health HEALTH_OK
monmap e4: 3 mons at {dgx-srv-04=10.33.3.46:6789/0,dgx-srv-05=10.33.3.48:6789/0,dgx-srv-06=10.33.3.50:6789/0}
election epoch 12, quorum 0,1,2 dgx-srv-04,dgx-srv-05,dgx-srv-06
fsmap e5: 1/1/1 up {0=dgx-srv-03=up:active}
mgr active: dgx-srv-06 standbys: dgx-srv-04, dgx-srv-05
osdmap e114: 18 osds: 18 up, 18 in
flags sortbitwise,require_jewel_osds,require_kraken_osds
pgmap v7946: 3072 pgs, 3 pools, 2148 bytes data, 20 objects
99684 MB used, 26717 GB / 26814 GB avail
3072 active+clean
cepher@srv-01:~$ uname -a
Linux srv-01 4.4.0-116-generic #140-Ubuntu SMP Mon Feb 12 21:23:04 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
This email message is for the sole use of the intended recipient(s) and may
contain confidential information. Any unauthorized review, use, disclosure
or distribution is prohibited. If you are not the intended recipient,
please contact the sender by reply email and destroy all copies of the original
message.
|
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
