And if you don’t have the pools, I created these. But from a little testing I noticed that lots of them are not used, so you have to investigate what is necessary or not. I think it is because I have read old and new docs, I was not able to find a definite list of necessary pools. So share if you found something ;) ceph osd pool create default.rgw 8 ceph osd pool create default.rgw.meta 8 ceph osd pool create default.rgw.control 8 ceph osd pool create default.rgw.log 8 ceph osd pool create .rgw.root 8 ceph osd pool create .rgw.gc 8 ceph osd pool create .rgw.buckets 16 ceph osd pool create .rgw.buckets.index 8 ceph osd pool create .rgw.buckets.extra 8 ceph osd pool create .intent-log 8 ceph osd pool create .usage 8 ceph osd pool create .users 8 ceph osd pool create .users.email 8 ceph osd pool create .users.swift 8 ceph osd pool create .users.uid 8 POOL_NAME USED OBJECTS CLONES COPIES MISSING_ON_PRIMARY UNFOUND DEGRADED RD_OPS RD WR_OPS WR .intent-log 0 0 0 0 0 0 0 0 0 0 0 .rgw.buckets 0 0 0 0 0 0 0 0 0 0 0 .rgw.buckets.extra 0 0 0 0 0 0 0 0 0 0 0 .rgw.buckets.index 0 0 0 0 0 0 0 0 0 0 0 .rgw.gc 0 0 0 0 0 0 0 0 0 0 0 .rgw.root 1113 4 0 12 0 0 0 6501 4334k 12 8192 .usage 0 0 0 0 0 0 0 0 0 0 0 .users 0 0 0 0 0 0 0 0 0 0 0 .users.email 0 0 0 0 0 0 0 0 0 0 0 .users.swift 0 0 0 0 0 0 0 0 0 0 0 .users.uid 0 0 0 0 0 0 0 0 0 0 0 default.rgw 0 0 0 0 0 0 0 0 0 0 0 default.rgw.buckets.data 3814M 1596 0 4788 0 0 0 1546 85953k 10850 4008M default.rgw.buckets.index 0 4 0 12 0 0 0 11070 11865k 6681 0 default.rgw.buckets.non-ec 0 0 0 0 0 0 0 2505 1624k 1952 0 default.rgw.control 0 8 0 24 0 0 0 0 0 0 0 default.rgw.log 2431 210 0 630 0 0 0 12914226 12611M 8603543 13312 default.rgw.meta 2462 14 0 42 0 0 0 1832 1575k 185 18432 -----Original Message----- From: Marc Roos Sent: dinsdag 27 maart 2018 16:35 To: ceph-users; massimo.sgaravatto Subject: Re: Instructions for manually adding a object gateway node ? This is how I did it (centos7), but beware I have client.rgw1 not client.radosgw.rgw1 yum install ceph-radosgw Creating the gw node user: ceph auth get-or-create client.rgw1 ceph auth caps client.rgw1 osd 'allow rwx' mon 'allow rwx' #limit access #ceph auth caps client.rgw1 mon 'allow rx' osd 'allow rwx pool=default.rgw, allow rwx pool=default.rgw.meta, allow rwx pool=.rgw.root, allow rwx pool=default.rgw.control, allow rwx pool=.rgw.gc, allow rwx pool=.rgw.buckets, allow rwx pool=.rgw.buckets.index, allow rwx pool=.rgw.buckets.extra, allow rwx pool=default.rgw.log, allow rwx pool=.intent-log, allow rwx pool=.usage, allow rwx pool=.users, allow rwx pool=.users.email, allow rwx pool=.users.swift, allow rwx pool=.users.uid' mkdir -p /var/lib/ceph/radosgw/ceph-rgw1 chown ceph.ceph -R /var/lib/ceph/radosgw service ceph-radosgw@rgw1 start systemctl enable ceph-radosgw@rgw1 Adding the configuration to /etc/ceph/ceph.conf: [client.rgw1] rgw_frontends = civetweb port=80+7480s ssl_certificate=/etc/ceph/xxx.pem -----Original Message----- From: Massimo Sgaravatto [mailto:massimo.sgaravatto@xxxxxxxxx] Sent: dinsdag 27 maart 2018 16:03 To: ceph-users@xxxxxxxxxxxxxx Subject: Instructions for manually adding a object gateway node ? Hi Are there somewhere some instructions on how to *MANUALLY* add a object gateway node on a Luminous cluster, that was manually installed (i.e. not using ceph-deploy) ? In the official doc I can find instruction only referring to ceph-deploy ... Thanks, Massimo _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |