The pause flag also pauses recovery traffic. It is literally a flag to stop anything and everything in the cluster so you can get an expert in to prevent something even worse from happening.
On Mon, Feb 12, 2018 at 1:56 PM Reed Dier <reed.dier@xxxxxxxxxxx> wrote:
I do know that there is a pause flag in Ceph.What I do not know is if that also pauses recovery traffic, in addition to client traffic.Also worth mentioning, this is a cluster-wide flag, not a pool level flag.ReedOn Feb 11, 2018, at 11:45 AM, David Turner <drakonstein@xxxxxxxxx> wrote:If you set min_size to 2 or more, it will disable reads and writes to the pool by blocking requests. Min_size is the minimum copies of a PG that need to be online to allow it to the data. If you only have 1 copy, then it will prevent io. It's not a flag you can set on the pool, but it should work out. If you have size=3, then min_size=3 should block most io until the pool is almost fully backfilled.
_______________________________________________On Sun, Feb 11, 2018, 9:46 AM Nico Schottelius <nico.schottelius@xxxxxxxxxxx> wrote:
Hello,
we have one pool, in which about 10 disks failed last week (fortunately
mostly sequentially), which now has now some pgs that are only left on
one disk.
Is there a command to set one pool into "read-only" mode or even
"recovery io-only" mode so that the only thing same is doing is
recovering and no client i/o will disturb that process?
Best,
Nico
--
Modern, affordable, Swiss Virtual Machines. Visit www.datacenterlight.ch
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com