From: ceph-users [mailto:ceph-users-bounces@xxxxxxxxxxxxxx] On Behalf Of Igor Mendelev Given that servers with 64 CPU cores (128 threads @ 2.7GHz) and up to 2TB RAM - as well as 12TB HDDs - are easily available and somewhat reasonably priced I wonder what's the maximum number of OSDs per OSD server (if using 10TB or 12TB HDDs) and how much RAM does it really require if total storage capacity for such OSD server is on the order of 1,000+ TB - is it still 1GB RAM per TB of HDD or it could be less (during normal operations - and extended with NVMe SSDs swap space for extra space during recovery)? Are there any known scalability limits in Ceph Luminous (12.2.2 with BlueStore) and/or Linux that'll make such high capacity OSD server not scale well (using sequential IO speed per HDD as a metric)? Thanks. How many total OSD’s will you have? If you are planning on having thousands then dense nodes might make sense. Otherwise you are leaving yourself open to having a few number of very large nodes, which will likely shoot you in the foot further down the line. Also don’t forget, unless this is purely for archiving, you will likely need to scale the networking up per node, 2x10G won’t cut it when you have 10-20+ disks per node. With Bluestore, you are probably looking at around 2-3GB of RAM per OSD, so say 4GB to be on the safe side. 7.2k HDD’s will likely only use a small proportion of a CPU core due to their limited IO potential. A would imagine that even with 90 bay JBOD’s, you will run into physical limitations before you hit CPU ones. Without knowing your exact requirements, I would suggest that larger number of smaller nodes, might be a better idea. If you choose your hardware right, you can often get the cost down to comparable levels by not going with top of the range kit. Ie Xeon E3’s or D’s vs dual socket E5’s. |
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
