What's the output of `ceph df` to see if your PG counts are good or not? Like everyone else has said, the space on the original osds can't be expected to free up until the backfill from adding the new osd has finished.
You don't have anything in your cluster health to indicate that your cluster will not be able to finish this backfilling operation on its own.
You might find this URL helpful in calculating your PG counts. http://ceph.com/pgcalc/ As a side note. It is generally better to keep your PG counts as base 2 numbers (16, 64, 256, etc). When you do not have a base 2 number then some of your PGs will take up twice as much space as others. In your case with 250, you have 244 PGs that are the same size and 6 PGs that are twice the size of those 244 PGs. Bumping that up to 256 will even things out.
Assuming that the metadata pool is for a CephFS volume, you do not need nearly so many PGs for that pool. Also, I would recommend changing at least the metadata pool to 3 replica_size. If we can talk you into 3 replica for everything else, great! But if not, at least do the metadata pool. If you lose an object in the data pool, you just lose that file. If you lose an object in the metadata pool, you might lose access to the entire CephFS volume.
On Sun, Nov 12, 2017, 9:39 AM gjprabu <gjprabu@xxxxxxxxxxxx> wrote:Hi Cassiano,Thanks for your valuable feedback and will wait for some time till new osd sync get complete. Also for by increasing pg count it is the issue will solve? our setup pool size for data and metadata pg number is 250. Is this correct for 7 OSD with 2 replica. Also currently stored data size is 17TB.ceph osd dfID WEIGHT REWEIGHT SIZE USE AVAIL %USE VAR PGS0 3.29749 1.00000 3376G 2814G 562G 83.35 1.23 1651 3.26869 1.00000 3347G 1923G 1423G 57.48 0.85 1522 3.27339 1.00000 3351G 1980G 1371G 59.10 0.88 1613 3.24089 1.00000 3318G 2131G 1187G 64.23 0.95 1684 3.24089 1.00000 3318G 2998G 319G 90.36 1.34 1765 3.32669 1.00000 3406G 2476G 930G 72.68 1.08 1656 3.27800 1.00000 3356G 1518G 1838G 45.24 0.67 166TOTAL 23476G 15843G 7632G 67.49MIN/MAX VAR: 0.67/1.34 STDDEV: 14.53ceph osd treeID WEIGHT TYPE NAME UP/DOWN REWEIGHT PRIMARY-AFFINITY-1 22.92604 root default-2 3.29749 host intcfs-osd10 3.29749 osd.0 up 1.00000 1.00000-3 3.26869 host intcfs-osd21 3.26869 osd.1 up 1.00000 1.00000-4 3.27339 host intcfs-osd32 3.27339 osd.2 up 1.00000 1.00000-5 3.24089 host intcfs-osd43 3.24089 osd.3 up 1.00000 1.00000-6 3.24089 host intcfs-osd54 3.24089 osd.4 up 1.00000 1.00000-7 3.32669 host intcfs-osd65 3.32669 osd.5 up 1.00000 1.00000-8 3.27800 host intcfs-osd76 3.27800 osd.6 up 1.00000 1.00000ceph osd pool ls detailpool 0 'rbd' replicated size 2 min_size 1 crush_ruleset 0 object_hash rjenkins pg_num 64 pgp_num 64 last_change 1 flags hashpspool stripe_width 0pool 3 'downloads_data' replicated size 2 min_size 1 crush_ruleset 0 object_hash rjenkins pg_num 250 pgp_num 250 last_change 39 flags hashpspool crash_replay_interval 45 stripe_width 0pool 4 'downloads_metadata' replicated size 2 min_size 1 crush_ruleset 0 object_hash rjenkins pg_num 250 pgp_num 250 last_change 36 flags hashpspool stripe_width 0RegardsPrabu GJI am also not an expert, but it looks like you have big data volumes on few PGs, from what I've seen, the pg data is only deleted from the old OSD when is completed copied to the new osd.
So, if 1 pg have 100G por example, only when it is fully copied to the new OSD, the space will be released on the old OSD.
If you have a busy cluster/network, it may take a good while. Maybe just wait a litle and check from time to time and the space will eventually be released.
Em 11/12/2017 11:44 AM, Sébastien VIGNERON escreveu:_______________________________________________ceph-users mailing list_______________________________________________I’m not an expert either so if someone in the list have some ideas on this problem, don’t be shy, share them with us.For now, I only have hypothese that the OSD space will be recovered as soon as the recovery process is complete.Hope everything will get back in order soon (before reaching 95% or above).I saw some messages on the list about the fstrim tool which can help reclaim unused free space, but i don’t know if it’s apply to your case.Cordialement / Best regards,Sébastien VIGNERONCRIANN,Ingénieur / EngineerTechnopôle du Madrillet745, avenue de l'Université76800 Saint-Etienne du Rouvray - Francetél. +33 2 32 91 42 91fax. +33 2 32 91 42 92support: support@xxxxxxxxxLe 12 nov. 2017 à 13:29, gjprabu <gjprabu@xxxxxxxxxxxx> a écrit :Hi Sebastien,Below is the query details. I am not that much expert and still learning . pg's are not stuck stat before adding osd and pg are slowly clearing stat to active-clean. Today morning there was around 53 active+undersized+degraded+remapped+wait_backfill and now it is 21 only, hope its going on and i am seeing the space keep increasing in newly added OSD (osd.6)ID WEIGHT REWEIGHT SIZE USE AVAIL %USE VAR PGS0 3.29749 1.00000 3376G 2814G 562G 83.35 1.23 165 ( Available Spaces not reduced after adding new OSD)1 3.26869 1.00000 3347G 1923G 1423G 57.48 0.85 1522 3.27339 1.00000 3351G 1980G 1371G 59.10 0.88 1613 3.24089 1.00000 3318G 2131G 1187G 64.23 0.95 1684 3.24089 1.00000 3318G 2998G 319G 90.36 1.34 176 ( Available Spaces not reduced after adding new OSD)5 3.32669 1.00000 3406G 2476G 930G 72.68 1.08 165 ( Available Spaces not reduced after adding new OSD)6 3.27800 1.00000 3356G 1518G 1838G 45.24 0.67 166TOTAL 23476G 15843G 7632G 67.49MIN/MAX VAR: 0.67/1.34 STDDEV: 14.53..._______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
